ETRM Enteromedics

PART I.  

intellectual property portfolio. For these reasons, we expect to continue to incur operating losses for the next several years. We have financed our operations to date principally through the sale of equity securities, debt financing and interest earned on cash investments.

Data from our ReCharge trial was used to support the premarket approval (PMA) application for the vBloc System, submitted to the FDA in June 2013. The ReCharge trial is a randomized, double-blind, sham-controlled, multicenter pivotal clinical trial testing the effectiveness and safety of vBloc Therapy utilizing our vBloc System. All patients in the trial received an implanted device and were randomized in a 2:1 allocation to treatment or sham control groups. The sham control group received a non-functional device during the trial period. All patients were expected to participate in a standard weight management counseling program. The primary endpoints of efficacy and safety were evaluated at 12 months. As announced, the ReCharge trial met its primary safety endpoint with a 3.7% serious adverse event rate. The safety profile at 12 months was further supported by positive cardiovascular signals including a 5.5 mmHg drop in systolic blood pressure, a 2.8 mmHg drop in diastolic blood pressure and a 3.6 bpm drop in average heart rate. 

Additionally, the trial demonstrated in the intent to treat (ITT) population (n=239) a clinically meaningful and statistically significant excess weight loss (EWL) of 24.4% (approximately 10% total body weight loss (TBL)) for vBloc Therapy-treated patients, with 52.5% of patients achieving at least 20% EWL, although it did not meet its co-primary efficacy endpoints due to higher than expected weight loss levels in the sham control group. In the per protocol population, the trial demonstrated an EWL of 26.3% for vBloc Therapy-treated patients, with 56.8% of patients achieving at least 20% EWL.  We subsequently announced that vBloc Therapy-treated patients were maintaining their weight loss at 18 months and 24 months with an EWL of 23.5% and 21.1%, respectively. The trial’s positive safety profile also continued throughout this reported time period.

In the ReCharge trial, two-thirds of vBloc Therapy-treated patients achieved at least 5% TBL at 12 months. According to the Centers for Disease Control and Prevention (CDC), 5% TBL can have significant health benefits on obesity related risk factors, or comorbidities, including reduction in blood pressure, improvements in Type 2 diabetes and reductions in triglycerides and cholesterol. Further analysis of our data at 12 months showed a meaningful impact on these comorbidities as noted in the below table showing the improvements seen at 10% TBL, the average weight loss in vBloc Therapy-treated patients.

We obtained European CE Mark approval for our vBloc System in 2011 for the treatment of obesity. The CE Mark approval for our vBloc System was expanded in 2014 to also include use for the management of Type 2 diabetes in obese patients.  Additionally, the final vBloc System components were previously listed on the Australian Register of Therapeutic Goods by the Therapeutic Goods Administration. The costs and resources required to successfully commercialize the vBloc System internationally are currently beyond our capability. Accordingly, we will continue to  devote our near-term efforts toward mounting a successful system launch in the United States. We intend to explore select international markets to commercialize the vBloc System as our resources permit, using direct, dealer and distributor sales models as the targeted market best dictates.

To date, we have not observed any mortality related to our device or any unanticipated adverse device effects in our human clinical trials. We have also not observed any long-term problematic clinical side effects in any patients. In addition, data from our VBLOC-DM2 ENABLE trial outside the United States demonstrate that vBloc Therapy may

hold promise in improving obesity-related comorbidities such as diabetes and hypertension. We are conducting, or plan to conduct, further studies in each of these comorbidities to assess vBloc Therapy’s potential in addressing multiple indications.

Enrollment of the VBLOC-DM2 ENABLE trial began in 2008. The VBLOC-DM2 ENABLE trial is designed to evaluate the efficacy and safety of vBloc Therapy on obese subjects as well as its effect on glucose regulation in approximately 30 patients who are using the vBloc System. The trial is an international, open-label, prospective, multi-center study. At each designated trial endpoint the efficacy of vBloc Therapy is evaluated by measuring average percentage EWL, HbA1c (blood sugar), FPG (fasting plasma glucose), blood pressure, calorie intake, appetite and other endpoints at one week, one month, three, six, 12 and 18 months and longer. The following results were reported at 12 month intervals.

To date, no deaths related to our device or unanticipated adverse device effects have been reported during the VBLOC-DM2 ENABLE trial and the safety profile is similar to that seen in the other vBloc trials.

Caloric Intake Sub-study:     A sub-study, conducted as part of the VBLOC-DM2 ENABLE trial, evaluated 12-month satiety and calorie intake in 10 patients with Type 2 diabetes mellitus enrolled in the trial. Follow-up measures among patients enrolled in the sub-study included EWL, 7-day diet records assessed by a nutritionist, calorie calculations and visual analogue scale (VAS) questions to assess satiety by 7-day or 24-hour recall at the following time periods: baseline, 4 and 12 weeks and 6 and 12 months post device initiation. A validated program, Food Works™, was used to determine calorie and nutrition content. Results include:

Our Product

The vBloc System, our initial product, uses vBloc Therapy to limit the expansion of the stomach, help control hunger sensations between meals, reduce the frequency and intensity of stomach contractions and produce a feeling of early and prolonged fullness. We believe the vBloc System offers obese patients a minimally-invasive treatment that can result in significant, durable and sustained weight loss. We believe that our vBloc System allows laproscopically trained surgeons to offer a new option to obese patients who are concerned about the risks and complications associated with currently available anatomy-altering, restrictive or malabsorptive surgical procedures.

The vBloc System delivers vBloc Therapy via two small electrodes that are laparoscopically implanted and placed in contact with the trunks of the vagus nerve just above the junction between the esophagus and the stomach, near the diaphragm and connected to a neuroregulator, which is subcutaneously implanted. The vBloc System is powered by an internal rechargeable battery. The vBloc System is implanted by a laproscopically trained surgeon using a procedure that is typically performed within 60-90 minutes as an outpatient procedure. The physician activates the vBloc System after implantation. vBloc Therapy is then delivered intermittently through the neuroregulator each day as scheduled (recommended during the patient’s waking hours when food is consumed). The scheduled delivery of the intermittent pulses blocking the vagus nerve is customized for each patient’s weight loss and overall treatment objectives. The physician is able to download reports to monitor patient use and system performance information. This information is particularly useful to physicians to ensure that patients are properly using the system.

Our Market

The Obesity and Metabolic Disease Epidemic

Obesity is a disease that has been increasing at an alarming rate with significant medical repercussions and associated economic costs. Since 1980, the worldwide obesity rate has more than doubled, with about 13% of the world’s adult population now being obese. The World Health Organization (WHO) currently estimates that as many as 600 million people worldwide are estimated to be obese and more than 1.9 billion adults are estimated to be overweight. Being overweight or obese is also the fifth leading risk for global deaths, with approximately 3.4 million adults dying each year as a result.

According to the WHO, there are over 70 progressive obesity-related diseases and disorders associated with obesity, which are also known as comorbidities, including Type 2 diabetes, hypertension, infertility and certain cancers. Worldwide, 44% of the diabetes burden, 23% of the heart disease burden and between 7% and 41% of certain cancer burdens are attributable to overweight and obesity.

We believe that this epidemic will continue to grow worldwide given dietary trends in developed nations that favor highly processed sugars, larger meals and fattier foods, as well as increasingly sedentary lifestyles. Despite the growing obesity rate, increasing public interest in the obesity epidemic and significant medical repercussions and economic costs associated with obesity, there continues to be a significant unmet need for effective treatments.

The United States Market

Obesity has been identified by the U.S. Surgeon General as the fastest growing cause of disease and death in the United States. Currently, the Center for Disease Control (the CDC) estimates that 35.7% of U.S. adults (or approximately 73,000,000 people) are obese, having a BMI of 30 or higher. BMI is calculated by dividing a person’s weight in kilograms by the square of their height in meters. It is estimated that if obesity rates stay consistent, 51% of the U.S. population will be obese by 2030. According to data from the U.S. Department of Health and Human Services, almost 80% of adults with a BMI above 30 have a co-morbidity, and almost 40% have two or more of these comorbidities. According to The Obesity Society and the CDC, obesity is associated with many significant weight-related comorbidities including Type 2 diabetes, high blood-pressure, sleep apnea, certain cancers, high cholesterol, coronary artery disease, osteoarthritis and stroke. According to the American Cancer Society, 572,000 Americans die of

cancer each year, about one-third of which are linked to excess body weight, poor nutrition and/or physical inactivity. Over 75% of hypertension cases are directly linked to obesity, and approximately two-thirds of U.S. adults with Type 2 diabetes are overweight or have obesity. Currently, medical costs associated with obesity in the U.S. are estimated to be up to $210 billion per year and nearly 21% of medical costs in the U.S. can be attributed to obesity. Researchers estimate that if obesity trends continue, obesity related medical costs could rise by another $44-$66 billion each year in the U.S. by 2030. The medical costs paid by third-party payers for people who are obese were $2,741 per year, or 42% higher than those of people who are normal weight and the average cost to employers is $6,627 to $8,067 per year per obese employee (BMI of 35 to 40 and higher).

Current Treatment Options and Their Limitations

We believe existing options for the treatment of obesity have seen limited adoption to date due to patient concerns and potential side effects including morbidity. The principal treatment alternatives available today for obesity include:

•    Behavioral modification . Behavioral modification, which includes diet and exercise, is an important component in the treatment of obesity; however, most obese patients find it difficult to achieve and maintain significant weight loss with a regimen of diet and exercise alone. 

•    Pharmaceutical therapy . Pharmaceutical therapies often represent a first option in the treatment of obese patients but carry significant safety risks and may present troublesome side effects and compliance issues.

•    Bariatric surgery . In more severe cases of obesity, patients may pursue more aggressive surgical treatment options such as gastric balloon, gastric banding, sleeve gastrectomy and gastric bypass. These procedures promote weight loss by surgically restricting the stomach’s capacity and outlet size. While largely effective, these procedures generally result in major lifestyle changes including dietary restrictions and food intolerances and they may present substantial side effects and carry short- and long-term safety and side effect risks that have limited their adoption.

Market Opportunity

Given the limitations of behavioral modification, pharmaceutical therapy and bariatric surgical approaches, we believe there is a substantial need for a patient-friendly, safer, effective and durable solution that: 

Obesity is a disease that has been increasing at an alarming rate with significant medical repercussions and associated economic costs. Since 1980, the worldwide obesity rate has more than doubled, with about 13% of the world’s adult population now being obese. The World Health Organization (WHO) currently estimates that as many as 600 million people worldwide are estimated to be obese and more than 1.9 billion adults are estimated to be overweight. Being overweight or obese is also the fifth leading risk for global deaths, with approximately 3.4 million adults dying each year as a result.

We believe that this epidemic will continue to grow worldwide given dietary trends in developed nations that favor highly processed sugars, larger meals and fattier foods, as well as increasingly sedentary lifestyles. Despite the growing obesity rate, increasing public interest in the obesity epidemic and significant medical repercussions and economic costs associated with obesity, there continues to be a significant unmet need for effective treatments.

Our Technology

vBloc Therapy is designed to block the gastrointestinal effects of the vagus nerve using high-frequency, low-energy electrical impulses to intermittently interrupt naturally occurring neural impulses on the vagus nerve between the brain and the digestive system. Our therapy controls hunger sensations between meals, limits the expansion of the stomach and reduces the frequency and intensity of stomach contractions, leading to earlier fullness. The resulting physiologic effects of vBloc Therapy produce a feeling of early and prolonged fullness following smaller meal portions. By intermittently blocking the vagus nerve and allowing it to return to full function between therapeutic episodes, our therapy limits the body’s natural tendency to circumvent the therapy, which can result in long-term weight loss.

We have designed our vBloc System to address a significant market opportunity that we believe exists for a patient-friendly, safe, effective, less-invasive and durable therapy that is intended to address the underlying causes of hunger and obesity. Our vBloc System offers each of the following benefits, which we believe could lead to the adoption of vBloc Therapy as the surgical therapy of choice for obesity and its comorbidities:

vBloc Therapy, delivered via our vBloc System, is intended to offer patients an effective, safe, outpatient solution that minimizes complications. It enables patients to lose weight and maintain long-term weight loss while enjoying a normal, healthy diet. We also believe that the vBloc System will appeal to physicians based on the inherent physiological approach of vBloc Therapy and its favorable safety profile.

Our Commercialization Strategy

Our goal is to establish vBloc Therapy, delivered via our vBloc System, as the leading obesity management solution. The key business strategies by which we intend to achieve these objectives include:

Commercialize Our Products Using a Geography Focused Direct-to-Patient Marketing Effort Within the United States . Since we received FDA approval on January 14, 2015 for vBloc Therapy, delivered via the vBloc System, we have begun a controlled commercial launch at select bariatric centers of excellence in the United States.  We had our first commercial sales in 2015 and sold 62 units in 2016. During 2015, we started the process of building a sales force and a controlled expansion of our operations and hired three new executives in January 2016 to oversee this expansion. The direct sales force is supported by field technical managers who provide training, technical and other support services to our customers. Throughout 2015 and 2016 our sales force called directly on key opinion leaders and bariatric surgeons at commercially-driven bariatric centers of excellence that met our certification criteria.  Additionally, in 2016, through a distribution agreement with Academy Medical, VA medical facilities now offer the vBloc System as a treatment option to veteran healthcare benefits. We intend to continue to build on these efforts in 2017 through self-pay patient and veteran focused direct-to-patient marketing and key opinion leader and center specific partnering.

Account management and patient registration processes used during the clinical trial are being transitioned to a commercial registration structure. Centers responsible for implanting our product will be expanded and trained to perform patient selection, implant the vBloc System and manage appropriate follow-up procedures.

Our sales representatives are supported by field clinical experts who are responsible for training, technical support, and other support services at various implant centers. Our sales representatives implement consumer marketing programs and provide surgical centers and implanting surgeons with educational patient materials.

We market directly to patients but sell our product to select surgical centers throughout the United States that have patients that would like to use the vBloc System to treat obesity and its comorbidities. The surgical centers then sell our product to the patients and implant and administer vBloc Therapy. In 2015 and 2016, almost all the patients that purchased the vBloc System paid for the therapy themselves and did not receive reimbursement from an insurance provider, and we expect that most of our sales will come from self-pay patients and veterans in 2017. Additionally, through our distribution agreement with Academy Medical, VA medical facilities now offer the the vBloc System as a treatment option for veterans at little to no cost to veterans in accordance with their veteran healthcare benefits.

We are working to obtain coverage for our product from the U.S. Centers for Medicare and Medicaid Services (CMS), Medicare Administrative Contractors (MACs), major insurance carriers, local coverage entities and self-insured plans, including Integrated Delivery Networks (IDNs). We received coverage from one significant IDN in the northeast, Winthrop University Hospital, in 2016 and are in active discussions with other IDNs throughout the country.

Identify Appropriate Coding, Obtain Coverage and Payment for the vBloc System. While payers are not our direct customers, their coverage and reimbursement policies influence patient and physician selection of obesity treatment. We are employing a focused campaign to obtain payer support for vBloc Therapy. We are seeking  specific and appropriate coding, coverage and payment for our vBloc System from private insurers and CMS. We plan to establish a market price for the vBloc System in the United States that is competitive with other available weight loss surgical procedures and comparable to other active implantable devices such as implantable cardioverter defibrillators, neurostimulation devices for chronic pain and depression, and cochlear implant systems.

CMS issued a national coverage determination for several specific types of bariatric surgery in 2006, which we view as positive potential precedent and guidance factors that CMS might use in deciding to cover our therapy. Although Medicare policies are often emulated or adopted by other third-party payers, other governmental and private insurance coverage currently varies by carrier and geographic location. We are actively working with major insurance carriers, local coverage entities and self-insured plans, as well as CMS, on obtaining coverage for procedures using our product. Initial coverage for vBloc will likely occur in self-contained healthcare systems that operate as IDNs, as these systems are able to evaluate risk-benefit ratios in a closed environment. For example, in the first quarter of 2016, we announced that the Winthrop Hospital System in New York, a significant IDN in the northeast, would cover our therapy for their employees.  Other similar arrangements are in active discussion.

Drive the Adoption and Endorsement of vBloc Therapy Through Obesity Therapy Experts and Patient Ambassadors. Our Clinical Development strategy is to collaborate closely with regulatory bodies, obesity therapy experts and others involved in the obesity management process, patients and their advocates and scientific experts. We have established credible and open relationships with obesity therapy experts and have identified vBloc Therapy patient ambassadors and we believe these individuals will be important in promoting patient awareness and gaining widespread adoption of the vBloc System.

Expand and Protect Our Intellectual Property Position. We believe that our issued patents and our patent applications encompass a broad platform of neuromodulation therapies, including vagal blocking and combination therapy focused on obesity, diabetes, hypertension and other gastrointestinal disorders. We intend to continue to pursue further intellectual property protection through U.S. and foreign patent applications.

Leverage our vBloc Technology for Other Disease States. We intend to continue to conduct research and development for other potential applications for our vBloc Therapy and believe we have a broad technology platform that will support the development of additional clinical applications and therapies for other metabolic and gastrointestinal disorders in addition to obesity.

Concentrate Our Resources on the U.S. Market . We intend to devote our near-term efforts toward mounting a successful system launch in the United States. We intend to explore select international markets to commercialize the vBloc System as our resources permit, using direct, dealer and distributor sales models as the targeted market best dictates.  Specifically, we are currently evaluating Canada as a market due to its relatively low barrier to entry and an established cash-pay bariatric patient market.

The vBloc System, Implantation Procedure and Usage

The vBloc System .    Our vBloc System delivers vBloc Therapy via two small electrodes that are laparoscopically implanted and placed in contact with the trunks of the vagus nerve just above the junction between the esophagus and the stomach, near the diaphragm. The vBloc System (shown below) is powered by an internal rechargeable battery.

The major components of the vBloc System include:

Implantation Procedure .    The vBloc System is implanted by a laproscopically trained surgeon using a procedure that is typically performed within 60-90 minutes. During the procedure, the surgeon laparoscopically implants the electrodes in contact with the vagal nerve trunks and then connects the lead wires to the neuroregulator, which is subcutaneously implanted. The implantation procedure and usage of the vBloc System carry some risks, such as the risks generally associated with laparoscopic procedures as well as the possibility of device malfunction. Adverse events related to the therapy, device or procedure may include, but are not limited to: transient pain at the implant site, heartburn, constipation, nausea, depression, diarrhea, infection, organ or nerve damage, surgical explant or revision, device movement, device malfunction and allergic reaction to the implant.

Usage of the vBloc System .    The physician activates the vBloc System after implantation. vBloc Therapy is then delivered intermittently through the neuroregulator each day as scheduled (recommended during the patient’s waking hours when food is consumed) through the neuroregulator. The scheduled delivery of the intermittent pulses blocking the vagus nerve is customized for each patient’s weight loss and overall treatment objectives.

The physician is able to download reports to monitor patient use and system performance information. This information is particularly useful to physicians to ensure that patients are properly using the system. Although usage of our vBloc System generally proceeds without complications, as part of the therapy or intentional weight loss, patients in our clinical trials have observed side-effects such as transient pain at the implant site, heartburn, bloating, dysphagia, eructation, cramps, diarrhea, nausea, constipation, and excessive feelings of fullness, especially after meals. In addition, patient noncompliance with properly charging the vBloc System may render vBloc Therapy less effective in achieving long-term weight loss.

Our Clinical Experience

We have conducted a series of clinical trials to date, which have shown that vBloc Therapy offers physicians a programmable method to selectively and reversibly block the vagus nerve resulting in clinically and statistically significant EWL.

We have not observed any mortality related to our device or any unanticipated adverse device effects in any of our completed or ongoing studies. Reported events include those associated with laparoscopic surgery or any implantable electronic device. The effects of vBloc Therapy include changes in appetite, and, in some patients, effects that may be expected with decreased intra-abdominal vagus nerve activity, such as temporary abdominal discomfort and short episodes of belching, bloating, cramping or nausea.

Findings from our clinical trials have resulted in publication in numerous peer-reviewed journals including The Journal of the American Medical Association, Journal of Obesity, Obesity Surgery, Surgery for Obesity and Related Diseases, Journal of Diabetes and Obesity, Surgery and Journal of Neural Engineering, and data have been presented at several scientific sessions including the American Society for Metabolic and Bariatric Surgery, International Federation for Surgery of Obesity and Metabolic Disorders, the Obesity Surgery Society of Australia & New Zealand and The Obesity Society.

Below is a more detailed description of our ongoing clinical studies:

ReCharge Trial

In October 2010, we received an unconditional Investigational Device Exemption (IDE) Supplement approval from the FDA to conduct a randomized, double-blind, sham-controlled, multicenter pivotal clinical trial, called the ReCharge trial, testing the effectiveness and safety of vBloc Therapy utilizing our second generation vBloc System. Enrollment and implantation in the ReCharge trial was completed in December 2011 in 239 randomized patients (233

implanted) at 10 centers. All patients in the trial received an implanted device and were randomized in a 2:1 allocation to treatment or control groups. The control group received a non-functional device during the trial period. All patients were expected to participate in a standard weight management counseling program. The primary endpoints of efficacy and safety were evaluated at 12 months. The ReCharge trial met its primary safety endpoint with a 3.7% serious adverse event rate, significantly lower than the threshold of 15% (p<0.0001). The safety profile at 12 months was further supported by positive cardiovascular signals including a 5.5 mmHg drop in systolic blood pressure, a 2.8 mmHg drop in diastolic blood pressure and a 3.6 bpm drop in average heart rate.

Although the trial did not meet its predefined co-primary efficacy endpoints, it did demonstrate in the ITT population (n=239) a clinically meaningful and statistically significant EWL of 24.4% (approximately 10% TBL) for vBloc Therapy-treated patients, with 52.5% of patients achieving at least 20% EWL. In the per protocol population, the trial demonstrated an EWL of 26.3% for vBloc Therapy-treated patients, with 56.8% of patients achieving at least 20% EWL. As a result of the positive safety and efficacy profile of vBloc Therapy, we used the data from the ReCharge trial to support a PMA application for the vBloc System, which was submitted to the FDA in June 2013 and was accepted for review and filing in July 2013. An Advisory Panel meeting was held on June 17, 2014 to review our PMA application for approval of the vBloc System. The Advisory Panel voted 8 to 1 “in favor” that the vBloc System is safe when used as designed and voted 4 to 5 “against” on the issue of a reasonable assurance of efficacy. The final vote, on whether the relative benefits outweighed the relative risk, was 6 to 2 “in favor,” with 1 abstention. We received FDA approval on January 14, 2015 for vBloc Therapy, delivered via the vBloc System, for the treatment of adult patients with obesity who have a BMI of at least 40 to 45 kg/m2, or a BMI of at least 35 to 39.9 kg/m2 with a related health condition such as high blood pressure or high cholesterol levels, and who have tried to lose weight in a supervised weight management program and failed within the past five years.

Further analysis of the 12 month data show that in the primary analysis (ITT) population (n=239), vBloc Therapy-treated patients achieved a 24.4% average EWL (approximately 10% TBL) compared to 15.9% for sham control patients. This 8.5% difference demonstrated statistical superiority over sham control (p=0.002), but not super-superiority at the pre-specified 10% margin (p=0.705). In total, 52.5% of vBloc Therapy-treated patients had 20% or more EWL compared to 32.5% in the control group (p=0.004), and 38.3% of vBloc Therapy-treated patients had 25% or more EWL compared to 23.4% in the sham control group (p=0.02). While the respective co-primary endpoint targets of 55% and 45% were not met, the endpoint targets were within the 95% confidence intervals for the observed rates and therefore the observed rates were not significantly lower than these pre-specified rates. These efficacy data demonstrate vBloc Therapy’s positive effect on weight loss.

In the per protocol group, which included only those patients who received therapy per the trial design (n=211), the vBloc Therapy-treated patients had a 26.3% average EWL (approximately 10% TBL) compared to 17.3% for the sham control group (p=0.003). In total, 56.8% of vBloc Therapy-treated patients achieved at least 20% EWL, which was above the predefined threshold of 55% compared to 35.4% in the sham control group (p=0.004). 41.8% of vBloc Therapy-treated patients also achieved at least 25% EWL in this population, which is slightly less than the predefined threshold of 45%, compared to 26.2% in the sham control group (p=0.03).

Additionally, two-thirds of vBloc Therapy-treated patients achieved at least 5% TBL at 12 months. According to the CDC, 5% TBL can have significant health benefits on obesity related risk factors, or comorbidities, including reduction in blood pressure, improvements in Type 2 diabetes and reductions in triglycerides and cholesterol. Further analysis of our data at 12 months showed a meaningful impact on these comorbidities as noted in the below table showing the improvements seen at 10% TBL, the average weight loss in vBloc Therapy-treated patients.

Approximately 93% of patients reached the 12 month assessment in the trial, consistent with a rigorously executed trial. vBloc Therapy-treated patients maintained their weight loss at 18 months and 24 months with an EWL of 23.5% and 21.1%, respectively. The trial’s positive safety profile also continued throughout this reported time period.

VBLOC-DM2 ENABLE Trial

Enrollment of the VBLOC-DM2 ENABLE trial began in 2008. The VBLOC-DM2 ENABLE trial is designed to evaluate the efficacy and safety of vBloc Therapy on obese subjects as well as its effect on glucose regulation in approximately 30 patients who are using the vBloc System. The trial is an international, open-label, prospective, multi-center study. At each designated trial endpoint the efficacy of vBloc Therapy is evaluated by measuring average percentage EWL, HbA1c (blood sugar), FPG (fasting plasma glucose), blood pressure, calorie intake, appetite and other endpoints at one week, one month, three, six, 12 and 18 months and longer. The following results were reported at 12 month intervals.

To date, no deaths related to our device or unanticipated adverse device effects have been reported during the VBLOC-DM2 ENABLE trial and the safety profile is similar to that seen in the other vBloc trials.

Caloric Intake Sub-study:     A sub-study, conducted as part of the VBLOC-DM2 ENABLE trial, evaluated 12-month satiety and calorie intake in 10 patients with Type 2 diabetes mellitus enrolled in the trial. Follow-up measures among patients enrolled in the sub-study included EWL, 7-day diet records assessed by a nutritionist, calorie calculations and visual analogue scale (VAS) questions to assess satiety by 7-day or 24-hour recall at the following time

periods: baseline, 4 and 12 weeks and 6 and 12 months post device initiation. A validated program, Food Works™, was used to determine calorie and nutrition content. Results include:

EMPOWER Trial

The EMPOWER trial is a randomized, double-blind, controlled pivotal study that began in 2006 and was designed to evaluate the safety and efficacy of our first-generation vBloc RF System in the treatment of obesity in 294 patients. The purpose of the EMPOWER trial is to measure the safety and efficacy of our vBloc RF System in obese patients after 12 months of vBloc Therapy. After all patients completed 12 months of follow up, the trial was unblinded and all patients, including those in the control group, had the option to receive ongoing vBloc Therapy. Patients will continue to be followed out to 60 months as part of the trial and we will continue to monitor average percentage EWL and safety during this extended period. At 12 months from implant, patients in the treated group who used the system for greater than or equal to 12 hours a day saw an average EWL of nearly 30%. The trial produced the following safety results:

At the 36 month endpoint, EMPOWER EWL was approximately 20% in 45 subjects receiving at least 9 hours of therapy per day. In addition, a subgroup analysis of EMPOWER trial patients was conducted to determine if vBloc Therapy would improve blood pressure prior to significant weight loss in obese subjects with hypertension, as defined by elevated blood pressure at baseline by JNC-7 guidelines (n=37, Group A) or history of hypertension (n=58, Group B) at baseline. The analysis was performed in a subset of subjects receiving at least 9 hours of therapy per day to 12 months.

Our Research and Development

Current R&D Focus

We have an experienced research and development team, including clinical, regulatory affairs and quality assurance, comprised of scientists, electrical engineers, software engineers and mechanical engineers with significant clinical knowledge and expertise. Our research and development efforts are focused in the following major areas:

We have spent a significant portion of our capital resources on research and development. Our research and development expenses were $5.1 million in 2016, $8.1 million in 2015 and $11.0 million in 2014. Having obtained FDA approval in January 2015, our main focus has been on commercialization efforts, resulting in decreases in spending on research and development in each of 2015 and 2016 compared to 2014, when we were still working through the FDA approval process.

Other Diseases and Disorders

We believe that our vBloc Therapy may have the potential, if validated through appropriate clinical studies, to treat a number of additional gastrointestinal disorders or comorbidities frequently associated with obesity, including the following:

None of the above conditions were included in our PMA application that was approved by the FDA on January 14, 2015, nor are they approved for sale internationally. Additional approvals will be required to market the vBloc System for these indications in the United States or internationally.

Medical Advisors

In addition to our collaboration with Mayo Clinic, we also have medical advisors who provide strategic guidance to our development programs, consult with us on clinical investigational plans and individual study protocols, and advise on clinical investigational site selection. Members of our medical advisory group also:

Our Competition

The market for obesity treatments is competitive, subject to technological change and significantly affected by new product development. Our primary competition in the obesity treatment market is currently from surgical obesity procedures and from various devices used to implement neurostimulation and gastric stimulation systems. We believe we are the first company having neuroblocking therapy for the treatment of obesity. There are currently no other FDA-approved neuromodulation or neuroblocking therapies for the treatment of obesity, but in the future we expect other new stimulation systems and neurotechnology devices to come on the market.

We expect our vBloc System will compete with surgical obesity procedures, including gastric bypass, gastric balloon, gastric banding and sleeve gastrectomy. These current surgical procedures are performed in less than 1% of all eligible obese patients today. Current manufacturers of approved gastric balloon and banding products include Apollo Endosurgery Inc. (Lap-Band and ORBERA Intragastric Balloon System), ReShape Medical, Inc. (ReShape Integrated Dual Balloon System), Obalon Therapeutics, Inc. (Obalon Balloon System) and Johnson & Johnson (Realize Adjustable Gastric Band).

In June of 2016, Aspire Bariatrics, Inc. received FDA approval on the Aspire Assist® System, an endoscopic alternative to weight loss surgery for people with moderate to severe obesity.  We are also aware that GI Dynamics, Inc. has received approvals in various international countries to sell its EndoBarrier Gastrointestinal Liner.

We also compete against the manufacturers of pharmaceuticals that are directed at treating obesity and the 99% of obese patients eligible for surgery that are not willing to pursue a surgical option . We are aware of a number of drugs that are approved for long-term treatment of obesity in the United States: Orlistat, marketed by Roche as Xenical and GlaxoSmithKline as Alli, Belviq marketed by Arena Pharmaceuticals, Inc., Qsymia, marketed by VIVUS, Inc. and Contrave, marketed by Orexigen Therapeutics, Inc.

In addition to competition from surgical obesity procedures, we compete with several private early-stage companies developing neurostimulation devices for application to the gastric region and related nerves for the treatment of obesity. These companies may prove to be significant competitors, particularly through collaborative arrangements

with large and established companies. They also compete with us in recruiting and retaining qualified scientific and management personnel, establishing clinical trial sites and subject registration for clinical trials, as well as in acquiring technologies and technology licenses complementary to our programs or advantageous to our business.

In addition, there are many larger potential competitors experimenting in the field of neurostimulation to treat various diseases and disorders. For example, Medtronic, Inc., which develops deep brain stimulators and spinal cord stimulators, acquired TransNeuronix, which sought to treat obesity by stimulating the smooth muscle of the stomach wall and nearby tissue. St. Jude Medical, Inc., through its acquisition of Advanced Neuromodulation Systems, is developing spinal cord stimulators. LivaNova PLC is developing vagus nerve stimulators to modulate epileptic seizures and other neurological disorders. Boston Scientific Corporation, through its Advanced Bionics division, is developing neurostimulation devices such as spinal cord stimulators and cochlear implants. Ethicon-Endo Surgery acquired LivaNova PLC’s patents and patent applications pertaining to vagus nerve stimulation for the treatment of obesity and two related comorbidities, diabetes and hypertension, in overweight patients.

We believe that the principal competitive factors in our market include:

Many of our competitors are either publicly-traded or are divisions of publicly-traded companies, and they enjoy several competitive advantages over us, including:

As a result, we cannot assure you that we will be able to compete effectively against these companies or their products.

Our Intellectual Property

Our success will depend in part on our ability to obtain and defend patent protection for our products and processes, to preserve our trade secrets and to operate without infringing or violating the proprietary rights of third parties. We own numerous U.S. and foreign patents, and have numerous patent applications pending, most of which pertain to treating gastrointestinal disorders and we believe provide us with broad intellectual property protection covering electrically-induced vagal blocking and methods for treating obesity. Assuming timely payment of maintenance fees as they become due, many of these patents will expire in 2023. We have also received or applied for patents in Europe, Australia, China, India and Japan. These applications primarily pertain to our vagal blocking technology and its application to obesity as well as other gastrointestinal disorders.

We also register the trademarks and trade names through which we conduct our business. To date, in the United States we have registered trademarks for vBLOC ® , ENTEROMEDICS ® and MAESTRO ® , each registered with the United States Patent and Trademark Office, and trademark applications for vBLOC POWER TO CHOOSE and vBLOC POWER TO CHOOSE AND DESIGN. In addition, some or all of the marks vBLOC, ENTEROMEDICS, MAESTRO, MAESTRO SYSTEM ORCHESTRATING OBESITY SOLUTIONS, vBLOC POWER TO CHOOSE and vBLOC POWER TO CHOOSE AND DESIGN are the subject of either a trademark registration or application for registration in Australia, Brazil, China, the European Community, India, Kuwait, Mexico, Saudi Arabia, Switzerland and the United Arab Emirates.

In addition to our patents, we rely on confidentiality and proprietary information agreements to protect our trade secrets and proprietary knowledge. These confidentiality and proprietary information agreements generally provide that all confidential information developed or made known to individuals by us during the course of their relationship with us is to be kept confidential and not disclosed to third parties, except in specific circumstances. The agreements also provide for ownership of inventions conceived during the course of such agreements. If our proprietary information is shared or our confidentiality agreements are breached, we may not have adequate remedies, or our trade secrets may otherwise become known to or independently developed by competitors.

Our Manufacturers and Suppliers

We have designed and developed all of the elements of our vBloc System, except for the clinician programmer hardware, which uses a commercially available laptop computer. To date, all of the materials and components of the system are procured from qualified suppliers and contract manufacturers in accordance with our proprietary specifications. We use third parties to manufacture our vBloc System to minimize our capital investment, help control costs and take advantage of the expertise these third parties have in the large-scale production of medical devices. We do not currently plan to manufacture our vBloc System ourselves. All of our key manufacturers and suppliers have experience working with commercial implantable device systems, are ISO certified and are regularly audited by us. Our key manufacturers and suppliers have a demonstrated record of compliance with international regulatory requirements.

Since we received FDA approval on January 14, 2015, and commenced commercialization of the vBloc System in the United States, we have increased our production volume slowly in connection with the  controlled commercial launch of the vBloc System in the United States. Given that we rely primarily on third-party manufacturers and suppliers for the production of our products, our ability to increase production going forward will depend upon the experience, certification levels and large scale production capabilities of our suppliers and manufacturers. Qualified suppliers and contract manufacturers have been and will continue to be selected to supply products on a commercial scale according to our proprietary specifications. We have modestly increased our inventory levels to support commercial forecasts as we expand our implanting centers and intend to continue to increase our inventory levels as we determine necessary. Our FDA approval process required us to name and obtain approval for the suppliers of key components of our vBloc System.

Many of our parts are custom designed and as a result, we may not be able to quickly qualify and establish additional or replacement suppliers for the components of our vBloc System. Any new approvals of vendors required by the FDA or other regulatory agencies in other international markets for our vBloc System as a result of the need to qualify or obtain alternate vendors for any of our components would delay our ability to sell and market the vBloc System and could have a material adverse effect on our business.

We believe that our current manufacturing and supply arrangements will be adequate to continue our controlled commercial launch and our ongoing and planned clinical trials. In order to produce the vBloc System in the quantities we anticipate to meet future market demand, we will need our manufacturers and suppliers to increase, or scale up, manufacturing production and supply arrangements by a significant factor over the current level of production. There are technical challenges to scaling up manufacturing capacity and developing commercial-scale manufacturing facilities that may require the investment of substantial additional funds by our manufacturers and suppliers and hiring and retaining additional management and technical personnel who have the necessary experience. If our manufacturers or suppliers are unable to do so, we may not be able to meet the requirements to expand the launch of the product in the United States or launch the product internationally or to meet future demand, if at all. We may also represent only a small portion of our suppliers’ or manufacturers’ business and if they become capacity constrained they may choose to allocate their available resources to other customers that represent a larger portion of their business. We currently anticipate that we will continue to rely on third-party manufacturers and suppliers for the production of the vBloc System as we expand our commercial launch. If we are unable to obtain a sufficient supply of our product, our revenue, business and financial prospects would be adversely affected.

Government Regulations

United States

Our vBloc System is regulated by the FDA as a medical device under the Federal Food, Drug, and Cosmetic Act (FFDCA) and the regulations promulgated under the FFDCA. Pursuant to the FFDCA, the FDA regulates the research, design, testing, manufacture, safety, labeling, storage, record keeping, advertising, sales and distribution, post-market adverse event reporting, production and advertising and promotion of medical devices in the United States. Noncompliance with applicable requirements can result in warning letters, fines, injunctions, civil penalties, recall or seizure of products, total or partial suspension of production, failure of the government to grant premarket approval for devices and criminal prosecution.

Medical devices in the United States are classified into one of three classes, Class I, II or III, on the basis of the amount of risk and the controls deemed by the FDA to be necessary to reasonably ensure their safety and effectiveness. Class I, low risk, devices are subject to general controls (e.g., labeling and adherence to good manufacturing practices). Class II, intermediate risk, devices are subject to general controls and to special controls (e.g., performance standards, and premarket notification). Generally, Class III devices are those which must receive premarket approval by the FDA to ensure their safety and effectiveness (e.g., life-sustaining, life-supporting and implantable devices, or new devices which have not been found substantially equivalent to legally marketed devices), and require clinical testing to ensure safety and effectiveness and FDA approval prior to marketing and distribution. The FDA also has the authority to require clinical testing of Class II devices. In both the United States and certain international markets, there have been a number of legislative and regulatory initiatives and changes, such as the Modernization Act, which could and have altered the healthcare system in ways that could impact our ability to sell our medical devices profitably.

The FFDCA provides two basic review procedures for medical devices. Certain products may qualify for a submission authorized by Section 510(k) of the FFDCA, where the manufacturer submits to the FDA a premarket notification of the manufacturer’s intention to commence marketing the product. The manufacturer must, among other things, establish that the product to be marketed is substantially equivalent to another legally marketed product. Marketing may commence when the FDA issues a letter finding substantial equivalence. If a medical device does not qualify for the 510(k) procedure, the manufacturer must file a premarket approval (PMA) application with the FDA. This procedure requires more extensive pre-filing clinical and preclinical testing than the 510(k) procedure and involves a significantly longer FDA review process.

Premarket Approval

Our vBloc System is an implanted device that required PMA from the FDA to market in the United States. The FDA approved the vBloc System on January 14, 2015 with post-approval conditions intended to ensure the safety and effectiveness of the device. Failure to comply with the conditions of approval can result in material adverse enforcement action, including the loss or withdrawal of the approval. Even after approval of the PMA, new PMAs or supplemental PMAs will be required for significant modifications to the manufacturing process, labeling, use and design of a device that is approved through the premarket approval process. Premarket approval supplements often require submission of the same type of information as a PMA except that the supplement is limited to information needed to support any

changes from the device covered by the original PMA. In addition, holders of an approved PMA are required to submit annual reports to the FDA that include relevant information on the continued use of the device.

Clinical Trials

A clinical trial is almost always required to support a PMA. Clinical trials for a “significant risk” device such as ours require submission to the FDA of an application for an IDE for clinical studies to be conducted within the United States. The IDE application must be supported by appropriate data, such as animal and laboratory testing results, showing that it is safe to test the device in humans and that the testing protocol is scientifically sound. Clinical trials for a significant risk device in the United States may begin once the IDE application is approved by the FDA and by the Institutional Review Boards (IRBs) overseeing the clinical trial at the various investigational sites.

Clinical trials require extensive recordkeeping and detailed reporting requirements. Our clinical trials must be conducted under the oversight of an IRB for each participating clinical trial site and in accordance with applicable regulations and policies including, but not limited to, the FDA’s good clinical practice requirements. We, the trial Data Safety Monitoring Board, the FDA or the IRB for each site at which a clinical trial is being performed may suspend a clinical trial at any time for various reasons, including a belief that the risks to study subjects outweigh the anticipated benefits.

Pervasive and Continuing U.S. Regulation

Numerous regulatory requirements apply. These include:

Advertising and promotion of medical devices are also regulated by the Federal Trade Commission and by state regulatory and enforcement authorities. Recently, some promotional activities for FDA-regulated products have resulted in enforcement actions brought under healthcare reimbursement laws and consumer protection statutes. In addition, under the federal Lanham Act, competitors and others can initiate litigation relating to advertising claims.

Compliance with regulatory requirements is enforced through periodic facility inspections by the FDA, which may be unannounced. Because we rely on contract manufacturing sites and service providers, these additional sites are also subject to these FDA inspections. Failure to comply with applicable regulatory requirements can result in enforcement action, which may include any of the following sanctions:

International

International sales of medical devices are subject to foreign government regulations, which vary substantially from country to country. The time required to obtain approval by a foreign country may be longer or shorter than that required for FDA approval, and the requirements may differ. The primary regulatory environment in Europe is that of the European Economic Community (EEC), which consists of 28 European Union (EU) member states encompassing nearly all the major countries in Europe. Additional countries that are not part of the EU, but are part of the European Economic Area (EEA), and other countries, such as Switzerland, have voluntarily adopted laws and regulations that mirror those of the EEC with respect to medical devices. The EEC has adopted Directive 90/385/EEC as amended by 2007/47/EC for active implantable medical devices and numerous standards that govern and harmonize the national laws and standards regulating the design, manufacture, clinical trials, labeling and adverse event reporting for medical devices that are marketed in member states. Medical devices that comply with the requirements of the national law of the member state in which their Notified Body is located will be entitled to bear CE marking, indicating that the device conforms to applicable regulatory requirements, and, accordingly, can be commercially marketed within the EEA and other countries that recognize this mark for regulatory purposes.

We obtained European CE Mark approval for our vBloc System in 2011 for the treatment of obesity. The CE Mark approval for our vBloc System was expanded in 2014 to also include use for the management of Type 2 diabetes in obese patients. The method of assessing conformity with applicable regulatory requirements varies depending on the class of the device, but for our vBloc System (which is considered an Active Implantable Medical Device (AIMD) in Australia and the EEA, and falls into Class III within the United States), the method involved a combination of self-assessment and issuance of declaration of conformity by the manufacturer of the safety and performance of the device, and a third-party assessment by a Notified Body of the design of the device and of our quality system. A Notified Body is a private commercial entity that is designated by the national government of a member state as being competent to make independent judgments about whether a product complies with applicable regulatory requirements. The assessment included, among other things, a clinical evaluation of the conformity of the device with applicable regulatory requirements. We use DEKRA Certification B.V. (formerly known as KEMA Quality) in the Netherlands as the Notified Body for our CE marking approval process.

Continued compliance with CE marking requirements is enforced through periodic facility inspections by the Notified Body, which may be unannounced. Because we rely on contract manufacturing sites and service providers, these additional sites may also be subject to these Notified Body inspections.

Patient Privacy Laws

United States and various international laws have been evolving to protect the confidentiality of certain patient health information, including patient medical records. These laws restrict the use and disclosure of certain patient health information. Enforcement actions, including financial penalties, related to patient privacy issues are globally increasing. The management of patient data may have an impact on certain clinical research activities and product design considerations.

Employees

As of December 31, 2016, we had a total of 32 employees. All of these employees are located in the United States.

From time to time we also employ independent contractors, consultants and temporary employees to support our operations. None of our employees are subject to collective bargaining agreements. We have never experienced a work stoppage and believe that our relations with our employees are good.

Executive Officers

The following table sets forth information regarding our executive officers, including their ages, as of February 28, 2017:

Dan W. Gladney has served as our President and Chief Executive Officer since November 16, 2015 and as Chairman of our board of directors since October 14, 2016. Mr. Gladney joined the Company on November 2, 2015 as President-Elect and a member of the board of directors. Prior to joining us, Mr. Gladney served as Chairman and Chief Executive Officer of Lanx, Inc., a medical device company focused on developing and commercializing innovative devices for spinal surgery. Prior to his time at Lanx, Inc., Mr. Gladney was a Healthcare Operating Partner at Norwest Equity Partners (NEP) from 2008 until 2010, where he was responsible for strategic planning, business growth and corporate governance for NEP portfolio companies and executing new investment opportunities for the firm. Prior to joining NEP, Mr. Gladney served as President and Chief Executive Officer of several medical device companies including Heart Leaflet Technologies and ACIST Medical Systems, both of which were acquired by The Bracco Group. He also served as Chairman, Chief Executive Officer and President of Complex Technologies, a publicly traded orthopedic and health and wellness electro therapy company, from 2002 until 2006. Mr. Gladney currently serves on the board of directors of ARIA CV, Inc. and has been a member of a number of other private and public company boards. After the sale of Lanx, he acted as a private investor and small business consultant.

Scott P. Youngstrom has served as our Chief Financial Officer and Chief Compliance Officer since October 3, 2016.  Mr. Youngstrom has over 25 years of strategic financial and operational experience in a variety of medical device companies, most recently having served as Chief Financial Officer and Vice President, Finance at Galil Medical, a leading developer of cryotherapy technology. Prior to Galil Medical, from 2009-2014, Mr. Youngstrom served as Vice President, Chief Operating Officer, and Chief Financial Officer at DGIMED Ortho, Inc., a developer of orthopedic medical devices. Mr. Youngstrom has previously served as Chief Financial Officer and Vice President, Finance with Anulex Technologies, Enpath Medical, Compex Technologies, Acist Medical Systems, and Cardiotronics.

Naqeeb (Nick) A. Ansari has served as our Senior Vice President of Sales since January 6, 2016. Mr. Ansari has over 20 years of experience in the medical device industry, having held various senior sales positions at Stryker Corporation, DePuy, Medtronic, Inc., Lanx, Inc. and Globus Medical Inc. Prior to joining the Company he spent two years as the owner of an independent distributor solely selling Biomet products. Prior to this, he served as Senior Vice President of Sales at Lanx, Inc. from 2010 to 2013.

Peter M. DeLange has served as our Senior Vice President of Operations and Business Development since January 18, 2016. Mr. DeLange has spent the last 11 years as the owner and President of Devicix, LLC a medical device engineering development company that was sold in 2015. At Devicix, he contracted with large medical device companies and worked closely with individual surgeons to develop new technologies. Since 2011, Mr. DeLange has also served as a Co-Founder and Board Member of FocusStart LLC, an early stage technology development company utilizing a capital efficient business model to advance medical technology. Prior to Devicix, he held software engineer and product development positions at numerous companies including ACIST Medical Systems, Nellcor Puritan Bennett, Emerson EMC and Quester Technology.

Paul F. Hickey has served as our Senior Vice President of Marketing and Reimbursement since January 18, 2016. Mr. Hickey has over 15 years of experience as a medical device executive, most recently having served as Chief Executive Officer of Pantheon Spinal, a small spine implant start-up company based in Austin, Texas, since 2014. Prior to Pantheon, he spent three years as Senior Vice President, Global Commercialization at Lanx, Inc., which was acquired by Biomet Spine in 2013, where he oversaw marketing, clinical reimbursement and R&D. Mr. Hickey also spent 17

years at Zimmer-Spine where he held numerous marketing and developments positions, most recently as Vice President, Global R&D and Emerging Technology from 2004-2008.

Our Corporate Information

We were incorporated in Minnesota in December 2002 as two separate legal entities, Alpha Medical, Inc. and Beta Medical, Inc., both of which were owned 100% by a common stockholder. In October 2003, the two entities were combined and changed our name to EnteroMedics Inc. In 2004 we reincorporated in Delaware. We file reports and other information with the Securities and Exchange Commission (SEC) including annual reports on Form 10-K, quarterly reports on Form 10-Q, current reports on Form 8-K and proxy or information statements. Those reports and statements as well as all amendments to those documents filed or furnished pursuant to Section 13(a) or 15(d) of the Securities Exchange Act of 1934, as amended (1) are available at the SEC’s Public Reference Room at 100 F Street, N.E., Washington, DC 20549, (2) may be obtained by sending an electronic message to the SEC at publicinfo@sec.gov or by sending a fax to the SEC at 1-202-777-1027, (3) are available at the SEC’s internet site (http://www.sec.gov), which contains reports, proxy and information statements and other information regarding issuers that file electronically with the SEC and (4) are available free of charge through our website as soon as reasonably practicable after electronic filing with, or furnishing to, the SEC. You may obtain information on the operation of the Public Reference Room by calling the SEC at 1-800-SEC-0330.

Our principal executive offices are located at 2800 Patton Road, St. Paul, Minnesota 55113, and our telephone number is (651) 634-3003. Our website address is www.enteromedics.com . The information on, or that may be accessed through, our website is not incorporated by reference into this Annual Report on Form 10-K and should not be considered a part of this Annual Report on Form 10-K.

other countries that recognize the European CE Mark, we have only generated limited revenue from commercial sales in the United States and have not generated revenue from commercial sales outside of the United States since 2012 and then only on a limited basis in Australia and the Middle East. We expect to incur significant sales and marketing expenses prior to recording sufficient revenue to offset these expenses. We expect our general and administrative expenses to increase as we continue to add the infrastructure necessary to support our initial commercial sales, operate as a public company and develop our intellectual property portfolio. For these reasons, we expect to continue to incur significant operating losses for the next several years. These losses, among other things, have had and will continue to have an adverse effect on our stockholders’ equity and working capital. Because of the numerous risks and uncertainties associated with developing new medical devices, we are unable to predict the extent of any future losses or when we will become profitable, if ever.

We will need substantial additional funding and may be unable to raise capital when needed, which would force us to delay, reduce or eliminate our product development programs or liquidate some or all of our assets.

Our operations have consumed substantial amounts of cash since inception. We expect to continue to spend substantial amounts on the commercialization of our product and on research and development, including conducting current and future clinical trials for our vBloc System and subsequent versions of our product. Cash used in operations was $20.6 million, $22.6 million and $19.4 million for the fiscal years ended December 31, 2016, 2015 and 2014, respectively. We expect that our cash used in operations will continue to be significant in the upcoming years, and that we will need to raise additional capital to commercialize our vBloc System in the United States, the European Economic Area, other countries that recognize the European CE Mark and other international markets, to explore other indications for our product, to continue our research and development programs, and to fund our ongoing operations.

Our future funding requirements will depend on many factors, including:

Until the time, if ever, when we can generate a sufficient amount of product revenue, we expect to finance our future cash needs through public or private equity offerings, debt financings or corporate collaboration, licensing arrangements and grants, as well as through interest income earned on cash balances.

Additional capital may not be available on terms favorable to us, or at all. If we raise additional funds by issuing equity securities, our stockholders may experience dilution. Debt financing, if available, may involve restrictive covenants or additional security interests in our assets. Any additional debt or equity financing that we complete may contain terms that are not favorable to us or our stockholders. If we raise additional funds through collaboration and licensing arrangements with third parties, it may be necessary to relinquish some rights to our technologies or products, or grant licenses on terms that are not favorable to us. If we are unable to raise adequate funds, we may have to delay, reduce the scope of, or eliminate some or all of, our development programs or liquidate some or all of our assets.

We incur significant costs as a result of operating as a public company, and our management is required to devote substantial time to compliance initiatives.

As a public company, we incur significant legal, accounting and other expenses. In addition, the Sarbanes-Oxley Act of 2002 (the Sarbanes-Oxley Act), as well as rules subsequently implemented by the SEC and NASDAQ have imposed various requirements on public companies, including establishment and maintenance of effective disclosure and financial controls and changes in corporate governance practices. Our management and other personnel devote a substantial amount of time to these compliance initiatives. Moreover, these rules and regulations result in increased legal and financial compliance costs and will make some activities more time-consuming and costly.

The Sarbanes-Oxley Act requires, among other things, that we maintain effective internal controls for financial reporting and disclosure. In particular, we are required to perform system and process evaluation and testing of our internal controls over financial reporting to allow management to report on the effectiveness of our internal controls over financial reporting, as required by Section 404 of the Sarbanes-Oxley Act. Our testing may reveal deficiencies in our internal controls over financial reporting that are deemed to be material weaknesses. We have incurred and continue to expect to incur significant expense and devote substantial management effort toward ensuring compliance with Section 404. Moreover, if we do not comply with the requirements of Section 404, or if we identify deficiencies in our internal controls that are deemed to be material weaknesses, the market price of our stock could decline and we could be subject to sanctions or investigations by NASDAQ, the SEC or other regulatory authorities, which would entail expenditure of additional financial and management resources.

We face significant uncertainty in the industry due to government healthcare reform .  

In the United States, there have been and continue to be a number of legislative initiatives to contain healthcare costs. The Patient Protection and Affordable Care Act, as amended, (the Affordable Care Act) as well as any future healthcare reform legislation, may have a significant impact on our business. The impact of the Affordable Care Act on the health care industry is extensive and includes, among other things, the federal government assuming a larger role in the health care system, expanding healthcare coverage of United States citizens and mandating basic healthcare benefits. The Affordable Care Act contains many provisions designed to generate the revenues necessary to fund the coverage expansions and to reduce costs of Medicare and Medicaid, including imposing a 2.3% excise tax on domestic sales of many medical devices by manufacturers that began in 2013. Although a moratorium was placed on the medical device excise tax in 2016 and 2017, if it is reinstated, it may adversely affect our sales and the cost of goods sold.

In January 2017, Congress voted in favor of a budget resolution that will produce legislation that would repeal certain aspects of the Affordable Care Act if enacted into law. Congress is also considering subsequent legislation to replace or repeal elements or all of the Affordable Care Act. In addition, there have been recent public announcements by members of Congress and the new presidential administration regarding their plans to repeal and replace the Affordable Care Act. Further, President Trump signed an Executive Order directing federal agencies with authorities and responsibilities under the Affordable Care Act to waive, defer, grant exemptions from, or delay the implementation of any provision of the Affordable Care Act that would impose a fiscal or regulatory burden on states, individuals, healthcare providers, health insurers, or manufacturers of pharmaceuticals or medical devices. At this time, it is not clear whether the Affordable Care Act will be repealed in whole or in part, and, if it is repealed, whether it will be replaced in whole or in part by another plan. and what impact those changes will have on coverage and reimbursement for healthcare items and services covered by plans that were authorized by the Affordable Care Act. We expect that additional state and federal healthcare reform measures will be adopted in the future, any of which could limit the amounts that federal and state governments will pay for healthcare products and services, and also indirectly affect the amounts that private payers are willing to pay. In addition, any healthcare reforms enacted in the future may, like the Affordable Care Act, be phased in over a number of years but, if enacted, could reduce our revenue, increase our costs, or require us to revise the ways in which we conduct business or put us at risk for loss of business. In addition, our results of operations, financial position and cash flows could be materially adversely affected by changes under the Affordable Care Act and changes under any federal or state legislation adopted in the future.

We are subject, directly or indirectly, to United States federal and state healthcare fraud and abuse and false claims laws and regulations. Prosecutions under such laws have increased in recent years and we may become subject to such litigation. If we are unable to, or have not fully complied with such laws, we could face substantial penalties.

Our operations are directly, or indirectly through customers, subject to various state and federal fraud and abuse laws, including, without limitation, the federal Anti-Kickback Statute and federal False Claims Act. These laws may impact, among other things, our sales, marketing and education programs.

The federal Anti-Kickback Statute prohibits persons from knowingly and willfully soliciting, offering, receiving or providing remuneration, directly or indirectly, in exchange for or to induce either the referral of an individual, or the furnishing or arranging for a good or service, for which payment may be made under a federal healthcare program such as the Medicare and Medicaid programs. Several courts have interpreted the statute’s intent requirement to mean that if any one purpose of an arrangement involving remuneration is to induce referrals of federal healthcare covered business, the statute has been violated. The Anti-Kickback Statute is broad and, despite a series of narrow safe harbors, prohibits many arrangements and practices that are lawful in businesses outside of the healthcare industry. Penalties for violations of the federal Anti-Kickback Statute include criminal penalties and civil sanctions such as fines, imprisonment and possible exclusion from Medicare, Medicaid and other federal healthcare programs. Many states have also adopted laws similar to the federal Anti-Kickback Statute, some of which apply to the referral of patients for healthcare items or services reimbursed by any source, not only the Medicare and Medicaid programs.

The federal False Claims Act prohibits persons from knowingly filing, or causing to be filed, a false claim to, or the knowing use of false statements to obtain payment from the federal government. Suits filed under the False Claims Act, known as “qui tam” actions, can be brought by any individual on behalf of the government and such individuals, commonly known as “whistleblowers,” may share in any amounts paid by the entity to the government in fines or settlement. The frequency of filing qui tam actions has increased significantly in recent years, causing greater numbers of medical device, pharmaceutical and healthcare companies to have to defend a False Claim Act action. When an entity is determined to have violated the federal False Claims Act, it may be required to pay up to three times the actual damages sustained by the government, plus civil penalties for each separate false claim. Various states have also enacted laws modeled after the federal False Claims Act.

We are unable to predict whether we could be subject to actions under any of these laws, or the impact of such actions. If we are found to be in violation of any of the laws described above or other applicable state and federal fraud and abuse laws, we may be subject to penalties, including civil and criminal penalties, damages, fines, exclusion from government healthcare reimbursement programs and the curtailment or restructuring of our operations.

We operate in a highly competitive industry that is subject to rapid change. If our competitors are able to develop and market products that are safer or more effective than our products, our commercial opportunities will be reduced or eliminated.

The health care industry is highly competitive, subject to rapid change and significantly affected by new product introductions and other market activities of industry participants. The obesity treatment market in which we operate has grown significantly in recent years and is expected to continue to expand as technology continues to evolve and awareness of the need to treat the obesity epidemic grows. Although we are not aware of any competitors in the neuroblocking market, we face potential competition from pharmaceutical and surgical obesity treatments. Many of our competitors in the obesity treatment field have significantly greater financial resources and expertise in research and development, manufacturing, preclinical testing, clinical trials, obtaining regulatory approvals and marketing approved products than we do. Smaller or early-stage companies may also prove to be significant competitors, particularly if they pursue competing solutions through collaborative arrangements with large and established companies, such as Allergan, Apollo Endosurgery, Boston Scientific, LivaNova PLC, Johnson & Johnson, Medtronic or St. Jude Medical. Our competitors  may develop and patent processes or products earlier than us, obtain regulatory approvals for competing products more rapidly than we are able to and develop more effective, safer and less expensive products or technologies that would render our products non-competitive or obsolete.

Failure to protect our information technology infrastructure against cyber-based attacks, network security breaches, service interruptions, or data corruption could significantly disrupt our operations and adversely affect our business and operating results.

We currently rely on information technology and telephone networks and systems, including the Internet, to process and transmit sensitive electronic information and will rely on such systems to manage or support a variety of business processes and activities, including sales, billing, customer service, procurement and supply chain, manufacturing, and distribution. We use enterprise information technology systems to record, process, and summarize financial information and results of operations for internal reporting purposes and to comply with regulatory financial reporting, legal, and tax requirements.

Our information technology systems, some of which are managed by third-parties, may be susceptible to damage, disruptions or shutdowns due to computer viruses, attacks by computer hackers, failures during the process of upgrading or replacing software, databases or components thereof, power outages, hardware failures, telecommunication failures, user errors or catastrophic events. We are not aware of any breaches of our information technology infrastructure. Despite the precautionary measures we have taken to prevent breakdowns in our information technology and telephone systems, if our systems suffer severe damage, disruption or shutdown and we are unable to effectively resolve the issues in a timely manner, our business and operating results may suffer.

Risks Associated with Development and Commercialization of the vBloc System

Our efforts to commercialize our vBloc System may not succeed or may encounter delays which could significantly harm our ability to generate revenue.

Our ability to generate revenue will depend upon the successful commercialization of our vBloc System. Our efforts to commercialize this product may not succeed for a number of reasons, including:

Besides requiring physician adoption, market acceptance of our vBloc System will depend on successfully communicating the benefits of our vBloc Therapy to three additional constituencies involved in deciding whether to treat a particular patient using such therapy: (1) the potential patients themselves; (2) institutions such as hospitals, where the procedure would be performed and opinion leaders in these institutions; and (3) third-party payers, such as private healthcare insurers and governmental payers, such as Medicare and Medicaid in the United States, which would ultimately bear most of the costs of the various providers and equipment involved in our vBloc Therapy. Marketing to each of these constituencies requires a different marketing approach, and we must convince each of these groups of the efficacy and utility of our vBloc Therapy to be successful.

If our vBloc Therapy, or any other neuroblocking therapy for other gastrointestinal diseases and disorders that we may develop, does not achieve an adequate level of acceptance by the relevant constituencies, we may not generate significant product revenue and may not become profitable.

After we received FDA approval on January 14, 2015, we began the commercialization process for our vBloc System in the United States, and had our first commercial sales within the United States in 2015. Previously, in 2012, we commenced commercial sales of our vBloc System in Australia and the Middle East, but have not generated revenue from commercial sales outside of the United States since 2012 as we focused our resources on the U.S. regulatory approval process and commercialization of our product in the United States and we do not know when, or if, we will have the resources to commercialize our vBloc System internationally. If we are not successful in the commercialization of our vBloc System for the treatment of obesity we may not generate enough revenue to offset our expenses and may be forced to cease operations as a result.

We have not received, and may never receive, approval from the regulatory bodies of any foreign country other than the European Economic Area to market our vBloc System for the treatment of obesity.

We do not have the necessary regulatory approvals to market our vBloc System in any foreign market other than the European Economic Area for which we received CE Mark approval for our vBloc System in March 2011 for the treatment of obesity and other countries which accept these regulatory approvals. Additionally, the vBloc System was previously listed on the Australian Register of Therapeutic Goods (ARTG). The CE Mark approval for our vBloc System was expanded in 2014 to also include use for the management of Type 2 diabetes in obese patients. We commenced commercialization of our product in Australia and the Middle East in 2012, but have not generated revenue from commercial sales outside of the United States since 2012 as we focused our resources on the U.S. regulatory

approval process and commercialization of our product in the United States and we do not know when, or if, we will have the resources to commercialize our vBloc System internationally.

In order to market our vBloc System outside of the United States, we will need to establish and comply with the numerous and varying regulatory requirements of other countries regarding safety and efficacy. Approval procedures vary among countries and can involve additional product testing and additional administrative review periods. The time required to obtain approval in other countries may differ from that required to obtain FDA approval. The regulatory approval process in other countries may also include all of the risks detailed below.

Regulatory approval in one country does not ensure regulatory approval in another, but a failure or delay in obtaining regulatory approval in one country may negatively impact the regulatory process in others. While the vBloc System was previously listed on the ARTG and has received European CE Marking, we cannot assure you when, or if, we will be able to restart sales in Australia or the Middle East, commence sales in the European Economic Area or other countries that recognize the CE Mark or obtain approval to market our vBloc System in other countries outside the United States.

Because vBloc Therapy represents a novel way to effect weight loss in the treatment of obesity, and because there is a large population of obese patients who might be eligible for treatment, it is possible that other regulatory bodies will review an application for approval of our vBloc System with greater scrutiny, which could cause that process to be lengthier and more involved than that for products without such characteristics. Such regulatory bodies can delay, limit or deny approval of our vBloc System for many reasons, including our inability to demonstrate safety or effectiveness to their satisfaction, insufficient or inadequate data from our clinical trials, the facilities of our third-party manufacturers or suppliers may not meet applicable requirements; and changes in the regulatory bodies’ approval policies, expectations with regard to the type or amount of scientific data required or adoption of new regulations may require additional data or additional clinical studies.

We have limited data and experience regarding the safety and efficacy of the vBloc System. Any long-term data that is generated may not be positive or consistent with our limited short-term data, which would affect market acceptance of these products.

Because our technology is relatively new in the treatment of obesity, we have performed clinical trials only with limited patient populations. The long-term effects of using the vBloc System in a large number of patients have not been studied and the results of short-term clinical use of the vBloc System do not necessarily predict long-term clinical benefits or reveal long-term adverse effects. 

Clinical trials conducted with the vBloc System have involved procedures performed by physicians who are very technically proficient. Consequently, both short and long-term results reported in these studies may be significantly more favorable than typical results achieved by physicians, which could negatively impact market acceptance of the vBloc System and materially harm our business.

We may be unable to complete our current clinical trials or any additional clinical trials, or we may experience significant delays in completing those clinical trials, which could impact market acceptance of our vBloc System and impair our financial position.

We continue to evaluate the vBloc Therapy in human clinical trials, including the EMPOWER trial and ReCharge trial. Conducting a clinical trial, which involves screening, assessing, testing, treating and monitoring patients at several sites across the country and possibly internationally, and coordinating with patients and clinical institutions, is a complex and uncertain process.

The completion of our ongoing and future clinical trials, could be delayed, suspended or terminated for several reasons, including:

Although we believe that we have adequate personnel and procedures in place to manage the clinical trial process, the complexity of managing this process while also commercializing our vBloc System and fulfilling our disclosure and other obligations to our stockholders, lenders, regulators and other constituents could result in our inadvertently taking actions outside the clinical trial process, which could adversely impact the trial. As is always the case, if the FDA ultimately determined that such actions materially violated the protocol for the trial, the FDA could suspend, terminate or reject the results of the clinical trial and require us to repeat the process.

If our clinical trials are delayed, it will take us longer to ultimately commercialize a product and generate revenue or the delay could result in our being unable to do so. Moreover, our development costs will increase if we have material delays in our clinical trials or if we need to perform more or larger clinical trials than planned.

We depend on clinical investigators and clinical sites to enroll patients in our clinical trials, and on other third parties to manage the trials and to perform related data collection and analysis, and, as a result, we may face costs and delays that are outside of our control.

We rely on clinical investigators and clinical sites to enroll patients in our clinical trials and other third parties to manage the trials and to perform related data collection and analysis. However, we may not be able to control the amount and timing of resources that clinical sites may devote to our clinical trials. If these clinical investigators and clinical sites fail to enroll a sufficient number of patients in our clinical trials, ensure compliance by patients with clinical protocols or comply with regulatory requirements, we will be unable to complete these trials, which could prevent us from obtaining or maintaining regulatory approvals for our product. Our agreements with clinical investigators and clinical trial sites for clinical testing place substantial responsibilities on these parties and, if these parties fail to perform as expected, our trials could be delayed or terminated. If these clinical investigators, clinical sites or other third parties do not carry out their contractual duties or obligations or fail to meet expected deadlines, or if the quality or accuracy of the clinical data they obtain is compromised due to their failure to adhere to our clinical protocols, regulatory requirements or for other reasons, our clinical trials may be extended, delayed or terminated, or the clinical data may be rejected by the FDA, adversely affecting our ability to successfully commercialize our product.

Modifications to the vBloc System may require additional approval from regulatory authorities, which may not be obtained or may delay our commercialization efforts.

The FDA and European Notified Body require medical device companies to initially make and document a determination of whether or not a modification requires a new approval, supplement or clearance; however, some of these regulatory authorities can review a company’s decision. Any modifications to an approved device that could significantly affect its safety or efficacy, or that would constitute a major change in its intended use could require additional clinical studies and separate regulatory applications. Product changes or revisions will require all the regulatory steps and associated risks discussed above possibly including testing, regulatory filings and clinical study. We may not be able to obtain approval of supplemental regulatory approvals for product modifications, new indications for

our product or new products. Delays in obtaining future clearances would adversely affect our ability to introduce new or enhanced products in a timely manner, which in turn would harm our commercialization efforts and future growth.

Our neuroblocking therapy for the treatment of obesity is a unique form of treatment. Physicians may not widely adopt our vBloc System and vBloc Therapy unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that vBloc Therapy provides a safe and effective alternative to other existing treatments for obesity.

We believe we are the first and only company currently pursuing neuroblocking therapy for the treatment of obesity. Physicians tend to be slow to change their medical treatment practices because of the time and skill required to learn a new procedure, the perceived liability risks arising from the use of new products and procedures, and the uncertainty of third-party coverage and reimbursement. Physicians may not widely adopt our vBloc System and vBloc Therapy unless they determine, based on experience, long-term clinical data and published peer reviewed journal articles, that the use of our vBloc Therapy provides a safe and effective alternative to other existing treatments for obesity, including pharmaceutical solutions and bariatric surgical procedures.

We cannot provide any assurance that the data collected from our current and planned clinical trials will be sufficient to demonstrate that our vBloc Therapy is an attractive alternative to other obesity treatment procedures. We rely on experienced and highly trained surgeons to perform the procedures in our clinical trials and both short-and long-term results reported in our clinical trials may be significantly more favorable than typical results of practicing physicians, which could negatively impact rates of adoption of our vBloc System and vBloc Therapy. We believe that published peer-reviewed journal articles and recommendations and support by influential physicians regarding our vBloc System and vBloc Therapy will be important for market acceptance and adoption, and we cannot assure you that we will receive these recommendations and support, or that supportive articles will be published.

If we fail to obtain adequate coding, coverage or payment levels for our product by governmental healthcare programs and other third-party payers, there may be no commercially viable markets for our vBloc System or other products we may develop or our target markets may be much smaller than expected.

Healthcare providers generally rely on third-party payers, including governmental payers, such as Medicare and Medicaid in the United States, as well as private healthcare insurers, to adequately cover and reimburse the cost of medical devices. Importantly, third-party payers are increasingly challenging the price of medical products and services and instituting cost containment measures to control or significantly influence the purchase of medical products and services. We expect that third-party payers will continue to attempt to contain or reduce the costs of healthcare by challenging the prices charged for healthcare products and services. If reimbursement for our vBloc System and the related surgery and facility costs is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, market acceptance of our vBloc System will be impaired and our future revenue, if any, would be adversely affected. As such, even though we have obtained FDA approval for our vBloc System and began to market it in 2015, the availability and level of third-party coverage and reimbursement could substantially affect our ability to successfully commercialize our vBloc System and other products we may develop.

The efficacy, safety, ease of use and cost-effectiveness of our vBloc System and of any competing products will, in part, determine the availability and level of coverage and payment. In particular, we expect that securing coding, coverage and payment for our vBloc System will be more difficult if healthcare providers and obese individuals do not consider the percentage of EWL from a pre-implementation baseline that our clinical trials have demonstrated to be clinically meaningful, whether or not regulatory agencies consider the improvement of patients treated in clinical trials to have been clinically meaningful.

In some international markets, pricing of medical devices is subject to government control. In the United States and international markets, we expect that both government and third-party payers will continue to attempt to contain or reduce the costs of healthcare by challenging the prices charged for healthcare products and services. If payment for our vBloc System and the related surgery and facility costs is unavailable or limited in scope or amount, or if pricing is set at unsatisfactory levels, market acceptance of our vBloc System will be impaired and our future revenue, if any, would be adversely affected.

We cannot predict the likelihood or pace of any significant regulatory or legislative action in any of these areas, nor can we predict whether or in what form healthcare legislation being formulated by various governments will be passed. We also cannot predict with precision what effect such governmental measures would have if they were ultimately enacted into law. However, in general, we believe that such legislative activity will likely continue. If adopted, such measures can be expected to have an impact on our business.

If we or our suppliers fail to comply with ongoing regulatory requirements, or if we experience unanticipated product problems, our vBloc System could be subject to restrictions or withdrawal from the market.

Completion of our clinical trials and commercialization of our vBloc System will require access to manufacturing facilities that meet applicable regulatory standards to manufacture a sufficient supply of our product. We rely solely on third parties to manufacture and assemble our vBloc System, and do not currently plan to manufacture or assemble our vBloc System ourselves in the future.

Any product for which we obtain marketing approval, along with the manufacturing processes, post-approval clinical data and promotional activities for such product, will be subject to continual review and periodic inspections by our European Notified Body and the FDA and other regulatory bodies. In particular we and our manufacturers and suppliers are required to comply with ISO requirements, Good Manufacturing Practices, which for medical devices is called the Quality System Regulation (QSR), and other regulations which cover the methods and documentation of the design, testing, production, control, quality assurance, labeling, packaging, storage and shipping of any product for which we obtain marketing approval. The FDA enforces the QSR through inspections, which may be unannounced, and the CE system enforces its certification through inspections and audits as well. Our quality system has received certification of compliance to the requirements of ISO 13485:2003 and will have to continue to successfully complete such inspections to maintain regulatory approvals for sales outside of the United States. Failure by us or one of our manufacturers or suppliers to comply with statutes and regulations administered by the FDA, CE authorities and other regulatory bodies, or failure to adequately respond to any observations, could result in enforcement actions against us or our manufacturers or suppliers, including, restrictions on our product or manufacturing processes, withdrawal of the product from the market, voluntary or mandatory recall, fines, suspension of regulatory approvals, product seizures, injunctions or the imposition of civil or criminal penalties.

If any of these actions were to occur it would harm our reputation and cause our product sales to suffer. Furthermore, our key component suppliers may not currently be or may not continue to be in compliance with applicable regulatory requirements. If the FDA or any other regulatory body finds their compliance status to be unsatisfactory, our commercialization efforts could be delayed, which would harm our business and our results of operations.

Additionally, if the FDA determines that our promotional materials, training or other activities constitute promotion of an unapproved use, we could be subject to significant liability, the FDA could request that we cease, correct or modify our training or promotional materials or subject us to regulatory enforcement actions. It is also possible that other federal, state or foreign enforcement authorities might take action if they consider our training or other promotional materials to constitute promotion of an unapproved use, which could result in significant fines or penalties under other statutory authorities, such as laws prohibiting false claims for reimbursement.

We are subject to medical device reporting regulations that require us to report to the FDA, Competent Authorities or other governmental authorities in other countries if our products cause or contribute to a death or serious injury or malfunction in a way that would be reasonably likely to contribute to death or serious injury if the malfunction were to recur. The FDA and similar governmental authorities in other countries have the authority to require the recall of our products in the event of material deficiencies or defects in design or manufacturing. A government mandated, or voluntary, recall by us could occur as a result of component failures, manufacturing errors or design defects, including defects in labeling. Any recall would divert managerial and financial resources and could harm our reputation with customers. There can be no assurance that there will not be product recalls in the future or that such recalls would not have a material adverse effect on our business. Once the product is approved and implanted in a large number of patients, infrequently occurring adverse events may appear that were not observed in the clinical trials. This could cause health authorities in countries where the product is available to take regulatory action, including marketing suspension and recall.

We may not be successful in our efforts to utilize our vBloc Therapy to treat comorbidities associated with obesity and other gastrointestinal diseases and disorders .  

As part of our long-term business strategy, we plan to research the application of our vBloc Therapy to treat comorbidities associated with obesity and other gastrointestinal diseases and disorders. Research to identify new target applications requires substantial technical, financial and human resources, whether or not any new applications for our vBloc Therapy are ultimately identified. We may be unable to identify or pursue other applications of our technology. Even if we identify potential new applications for our vBloc Therapy, investigating the safety and efficacy of our therapy requires extensive clinical testing, which is expensive and time-consuming. If we terminate a clinical trial in which we have invested significant resources, our prospects will suffer, as we will have expended resources on a program that will not provide a return on our investment and missed the opportunity to allocate those resources to potentially more productive uses. We will also need to obtain regulatory approval for these new applications, as well as achieve market acceptance and an acceptable level of reimbursement.

We depend on a limited number of manufacturers and suppliers of various critical components for our vBloc System. The loss of any of these manufacturer or supplier relationships could prevent or delay commercialization of our vBloc System.

We rely entirely on third parties to manufacture our vBloc System and to supply us with all of the critical components of our vBloc System, including our leads, implantable batteries, neuroregulators, transmit coils and controllers. If any of our existing suppliers were unable or unwilling to meet our demand for product components, or if the components or finished products that they supply do not meet quality and other specifications, completion of our clinical trials or commercialization of our product could be delayed. Alternatively, if we have to switch to a replacement manufacturer or replacement supplier for any of our product components, we may face additional regulatory delays, and the manufacture and delivery of our vBloc System could be interrupted for an extended period of time, which could delay completion of our clinical trials or commercialization of our vBloc System.

If our device manufacturers or our suppliers are unable to provide an adequate supply of our product, our growth could be limited and our business could be harmed.

In order to produce our vBloc System in the quantities that we anticipate will be required to meet anticipated market demand, we will need our manufacturers to increase, or scale-up, the production process by a significant factor over our current level of production. There are technical challenges to scaling-up manufacturing capacity and developing commercial-scale manufacturing facilities that may require the investment of substantial additional funds by our manufacturers and hiring and retaining additional management and technical personnel who have the necessary manufacturing experience. If our manufacturers are unable to do so, we may not be able to meet future demand, if any. We may also represent only a small portion of our supplier’s or manufacturer’s business and if they become capacity constrained they may choose to allocate their available resources to other customers that represent a larger portion of their business. We currently anticipate that we will continue to rely on third-party manufacturers and suppliers for the production of the vBloc System. If we are unable to obtain a sufficient supply of our product, our revenue, business and financial prospects would be adversely affected.

If we are unable to establish sales and marketing capabilities or enter into and maintain arrangements with third parties to market and sell our vBloc System, our business may be harmed.

We have limited experience as a company in sales, marketing and distribution of our product and began the process of developing a sales and marketing organization in 2015 and have continued its development in 2016 and 2017. We market our products in the United States through a direct sales force supported by field technical managers who provide training, technical and other support services to our customers. We have begun to develop the necessary sales and marketing infrastructure in order to commercialize our product, but developing a sales force is expensive and time consuming and we may be unable to develop an effective sales and marketing organization on a timely basis, if at all, or maintain our current sales and marketing capabilities, either of which would delay or prevent us from generating enough revenue to become profitable. Our sales force will be competing with the experienced and well-funded marketing and sales organizations of our more established competitors. If we are unable to establish and maintain our own sales and marketing capabilities, we will need to contract with third parties to market and sell our product. In this event, our profit margins would likely be lower than if we performed these functions ourselves. In addition, we would necessarily be

relying on the skills and efforts of others for the successful marketing of our product. If we are unable to establish and maintain effective sales and marketing capabilities, independently or with others, we may not be able to generate product revenue and may not become profitable.

When we have sufficient resources to commercialize our vBloc System internationally, we intend to use direct, dealer and distributor sales models as the targeted geography best dictates. We have entered into an agreement with Device Technologies, a third-party distributor in Australia, to sell our product in Australia and we have entered into an agreement with Bader Sultan & Brothers, a third-party distributor in Kuwait, to sell our product in the Middle East. To generate sales and launch the commercialization of our product in other geographic regions we may need to identify and enter into other third-party distributor agreements. There is no assurance that we can do so on economically acceptable terms or that if we do so, that a third-party distributor will be successful in selling our product.

The commercialization of our product in countries outside the United States will expose our business to certain risks associated with international operations.

When we have sufficient resources to do so, we intend to commercialize our product in the European Economic Area, Australia and the Middle East and other international markets in which we obtain necessary regulatory approvals. Conducting international operations will subject us to unique risks, including:

The occurrence of any one of these risks could negatively affect our business and results of operations generally. Additionally, operating in international markets requires significant management attention. We cannot be certain that investments required to establish operations in other countries will produce desired levels of revenues or profitability.

We may be unable to attract and retain management and other personnel we need to succeed.

Our success depends on the services of our senior management and other key employees. The loss of the services of one or more of our officers or key employees could delay or prevent the successful completion of our clinical trials and the commercialization of our vBloc System. We have begun a controlled expansion of our operations and hired three new executives in January 2016 to oversee this expansion. Our continued growth will require hiring a number of qualified clinical, scientific, commercial and administrative personnel. Accordingly, recruiting and retaining such personnel in the future will be critical to our success. There is intense competition from other companies and research and academic institutions for qualified personnel in the areas of our activities. If we fail to identify, attract, retain and motivate these highly skilled personnel, we may be unable to continue our development and commercialization activities.

We may be unable to manage our growth effectively.

Our business strategy entails significant future growth. For example, we will have to expand existing operations in order to conduct additional clinical trials, increase our contract manufacturing capabilities, hire and train new personnel to handle the marketing and sales of our product, assist patients and healthcare providers in obtaining reimbursement for the use of our product and create and develop new applications for our technology. This growth may place significant strain on our management and financial and operational resources. Successful growth is also dependent upon our ability to implement appropriate financial and management controls, systems and procedures. Our ability to effectively manage growth depends on our success in attracting and retaining highly qualified personnel, for which the competition may be intense. If we fail to manage these challenges effectively, our business could be harmed. 

We face the risk of product liability claims that could be expensive, divert management’s attention and harm our reputation and business. We may not be able to obtain adequate product liability insurance.

Our business exposes us to a risk of product liability claims that is inherent in the testing, manufacturing and marketing of medical devices. The medical device industry has historically been subject to extensive litigation over product liability claims. We may be subject to product liability claims if our vBloc System, or any other products we may sell, causes, or appears to have caused, an injury. Claims may be made by consumers, healthcare providers, third-party strategic collaborators or others selling our products.

We have product liability insurance, which covers the use of our vBloc System and vBloc Therapy in our clinical trials and any commercial sales, in an amount we believe is appropriate. Our current product liability insurance may not continue to be available to us on acceptable terms, if at all, and, if available, the coverage may not be adequate to protect us against any future product liability claims. If we are unable to obtain insurance at an acceptable cost and on acceptable terms for an adequate coverage amount, or otherwise to protect against potential product liability claims, we could be exposed to significant liabilities, which may harm our business. A product liability claim, recall or other claim with respect to uninsured liabilities or for amounts in excess of insured liabilities could have a material adverse effect on our business, financial condition and results of operations. These liabilities could prevent or interfere with our product commercialization efforts. Defending a suit, regardless of merit, could be costly, could divert management attention and might result in adverse publicity, which could result in the withdrawal of, or inability to recruit, clinical trial volunteers or result in reduced acceptance of our vBloc System and vBloc Therapy in the market.

We may be subject to product liability claims even if it appears that the claimed injury is due to the actions of others. For example, we rely on the expertise of surgeons and other associated medical personnel to perform the medical procedure to implant and remove our vBloc System and to perform the related vBloc Therapy. If these medical personnel are not properly trained or are negligent, the therapeutic effect of vBloc Therapy may be diminished or the patient may suffer critical injury, which may subject us to liability. In addition, an injury that is caused by the negligence of one of our suppliers in supplying us with a defective component that injures a patient could be the basis for a claim against us. A product liability claim, regardless of its merit or eventual outcome, could result in decreased demand for our products; injury to our reputation; diversion of management’s attention; withdrawal of clinical trial participants; significant costs of related litigation; substantial monetary awards to patients; product recalls or market withdrawals; loss of revenue; and the inability to commercialize our products under development.

Risks Related to Intellectual Property

If we are unable to obtain or maintain intellectual property rights relating to our technology and neuroblocking therapy, the commercial value of our technology and any future products will be adversely affected and our competitive position will be harmed.

Our commercial success depends in part on our ability to obtain protection in the United States and other countries for our vBloc System and vBloc Therapy by establishing and maintaining intellectual property rights relating to or incorporated into our technology and products. We own numerous U.S. and foreign patents and have numerous patent applications pending, most of which pertain to treating gastrointestinal disorders. We have also received or applied for patents in Europe, Australia, China, India and Japan. In addition, we are the exclusive licensee of three U.S. patents owned by the Mayo Foundation for Medical Education and Research, which are unrelated to our vBloc Therapy. Our pending and future patent applications may not issue as patents or, if issued, may not issue in a form that will provide us any competitive advantage. We expect to incur substantial costs in obtaining patents and, if necessary, defending our proprietary rights. The patent positions of medical device companies, including ours, can be highly uncertain and involve complex and evolving legal and factual questions. We do not know whether we will obtain the patent protection we seek, or that the protection we do obtain will be found valid and enforceable if challenged. If we fail to obtain adequate protection of our intellectual property, or if any protection we obtain is reduced or eliminated, others could use our intellectual property without compensating us, resulting in harm to our business. We may also determine that it is in our best interests to voluntarily challenge a third-party’s products or patents in litigation or administrative proceedings, including patent interferences, re-examinations or under more recently promulgated Inter Partes Review proceedings, depending on when the patent application was filed. In the event that we seek to enforce any of our owned or exclusively licensed patents against an infringing party, it is likely that the party defending the claim will seek to invalidate the patents we assert, which, if successful could result in the loss of the entire patent or the relevant portion of our patent,

which would not be limited to any particular party. Any litigation to enforce or defend our patent rights, even if we were to prevail, could be costly and time-consuming and could divert the attention of our management and key personnel from our business operations. Even if we were to prevail in any litigation, we cannot assure you that we can obtain an injunction that prevents our competitors from practicing our patented technology. Our competitors may independently develop similar or alternative technologies or products without infringing any of our patent or other intellectual property rights, or may design around our proprietary technologies.

We cannot assure you that we will obtain any patent protection that we seek, that any protection we do obtain will be found valid and enforceable if challenged or that it will confer any significant commercial advantage. U.S. patents and patent applications may also be subject to interference proceedings and U.S. patents may be subject to re-examination proceedings in the U.S. Patent and Trademark Office (USPTO), or under more recently promulgated Inter Partes Review proceedings, depending on when the patent application was filed, and foreign patents may be subject to opposition or comparable proceedings in the corresponding foreign patent offices, which proceedings could result in either loss of the patent or denial of the patent application, or loss or reduction in the scope of one or more of the claims of, the patent or patent application. In addition, such interference, re-examination and opposition proceedings may be costly. Moreover, the U.S. patent laws have recently changed with the adoption of the America Invents Act (AIA), possibly making it easier to challenge patents. Some of our technology was, and continues to be, developed in conjunction with third parties, and thus there is a risk that such third parties may claim rights in our intellectual property. Thus, any patents that we own or license from others may provide limited or no protection against competitors. Our pending patent applications, those we may file in the future, or those we may license from third parties, may not result in patents being issued. If issued, they may not provide us with proprietary protection or competitive advantages against competitors with similar technology.

Non-payment or delay in payment of patent fees or annuities, whether intentional or unintentional, may result in loss of patents or patent rights important to our business. Many countries, including certain countries in Europe, have compulsory licensing laws under which a patent owner may be compelled to grant licenses to third parties. In addition, many countries limit the enforceability of patents against third parties, including government agencies or government contractors. In these countries, the patent owner may have limited remedies, which could materially diminish the value of the patent. In addition, the laws of some foreign countries do not protect intellectual property rights to the same extent as do the laws of the United States, particularly in the field of medical products and procedures.

Many of our competitors have significant resources and incentives to apply for and obtain intellectual property rights that could limit or prevent our ability to commercialize our current or future products in the United States or abroad.

Many of our competitors who have significant resources and have made substantial investments in competing technologies may seek to apply for and obtain patents that will prevent, limit or interfere with our ability to make, use or sell our products either in the United States or in international markets. Our current or future U.S. or foreign patents may be challenged, circumvented by competitors or others or may be found to be invalid, unenforceable or insufficient. In most cases in the United States patent applications are published 18 months after filing the application, or corresponding applications are published in other countries, and since publication of discoveries in the scientific or patent literature often lags behind actual discoveries, we cannot be certain that we were the first to make the inventions covered by each of our pending patent applications, or that we were the first to file patent applications for such inventions.

If we are unable to protect the confidentiality of our proprietary information and know-how, the value of our technology and products could be adversely affected.

In addition to patented technology, we rely on our unpatented proprietary technology, trade secrets, processes and know-how. We generally seek to protect this information by confidentiality agreements with our employees, consultants, scientific advisors and third parties. These agreements may be breached, and we may not have adequate remedies for any such breach. In addition, our trade secrets may otherwise become known or be independently developed by competitors. To the extent that our employees, consultants or contractors use intellectual property owned by others in their work for us, disputes may arise as to the rights in related or resulting know-how and inventions.

Intellectual property litigation is a common tactic in the medical device industry to gain competitive advantage. If we become subject to a lawsuit, we may be required to expend significant financial and other resources and our management’s attention may be diverted from our business.

There has been a history of frequent and extensive litigation regarding patent and other intellectual property rights in the medical device industry, and companies in the medical device industry have employed intellectual property litigation to gain a competitive advantage. Accordingly, we may become subject to patent infringement claims or litigation in a court of law, or interference proceedings declared by the USPTO to determine the priority of inventions or an opposition to a patent grant in a foreign jurisdiction. We may also become subject to claims or litigation seeking payment of royalties based on sales of our product in connection with licensing or similar joint development arrangements with third parties or in connection with claims of patent infringement. The defense and prosecution of intellectual property suits, USPTO interference proceedings, reexamination proceedings, or under more recently promulgated Inter Partes Review proceedings, depending on when the patent application was filed, or opposition proceedings and related legal and administrative proceedings, are both costly and time consuming and could result in substantial uncertainty to us. Litigation or regulatory proceedings may also be necessary to enforce patent or other intellectual property rights of ours or to determine the scope and validity of other parties’ proprietary rights. Any litigation, opposition or interference proceedings, with or without merit, may result in substantial expense to us, cause significant strain on our financial resources, divert the attention of our technical and management personnel and harm our reputation. We may not have the financial resources to defend our patents from infringement or claims of invalidity. An adverse determination in any litigation could subject us to significant liabilities to third parties, require us to seek licenses from or pay royalties to third parties or prevent us from manufacturing, selling or using our proposed products, any of which could have a material adverse effect on our business and prospects. We are not currently a party to any patent or other litigation.

Our vBloc Therapy or vBloc System may infringe or be claimed to infringe patents that we do not own or license, including patents that may issue in the future based on patent applications of which we are currently aware, as well as applications of which we are unaware. For example, we are aware of other companies that are investigating neurostimulation, including neuroblocking, and of patents and published patent applications held by companies in those fields. While we believe that none of such patents and patent applications are applicable to our products and technologies under development, third parties who own or control these patents and patent applications in the United States and abroad could bring claims against us that would cause us to incur substantial expenses and, if such claims are successfully asserted against us, they could cause us to pay substantial damages, could result in an injunction preventing us from selling, manufacturing or using our proposed products and would divert management’s attention. Because patent applications in many countries such as the United States are maintained under conditions of confidentiality and can take many years to issue, there may be applications now pending of which we are unaware and which may later result in issued patents that our products infringe. If a patent infringement suit were brought against us, we could be forced to stop our ongoing or planned clinical trials, or delay or abandon commercialization of the product that is subject of the suit.

As a result of patent infringement claims, or to avoid potential claims, we may choose or be required to seek a license from a third-party and be required to pay license fees or royalties, or both. A license may not be available at all or on commercially reasonable terms, and we may not be able to redesign our products to avoid infringement. Modification of our products or development of new products could require us to conduct additional clinical trials and to revise our filings with the FDA and other regulatory bodies, which would be time-consuming and expensive. Even if we were able to obtain a license, the rights may be nonexclusive, which could result in our competitors gaining access to the same intellectual property. Ultimately, we could be forced to cease some aspect of our business operations if, as a result of actual or threatened patent infringement claims, we are unable to enter into licenses on acceptable terms. This could harm our business significantly.

Risks Relating to Ownership of Our Common Stock

The trading price of our common stock has been volatile and is likely to be volatile in the future.

The trading price of our common stock has been highly volatile. Further, our common stock has a limited trading history. Since our public offering in November 2007 through February 28, 2017 our stock price has fluctuated from a low of $1.75 to a high of $67,851.00, as adjusted for the 1-for-70 reverse split of our common stock that was effected

after trading on December 27, 2016 and the 1-for-15 reverse split of our common stock that was effected on January 6, 2016. The market price for our common stock will be affected by a number of factors, including:

The stock prices of many companies in the medical device industry have experienced wide fluctuations that have often been unrelated to the operating performance of these companies. Following periods of volatility in the market price of a company’s securities, securities class action litigation often has been initiated against a company. If class action litigation is initiated against us, we may incur substantial costs and our management’s attention may be diverted from our operations, which could significantly harm our business.

Our inability to comply with the listing requirements of the NASDAQ Stock Market could result in our common stock being delisted, which could affect its market price and liquidity and reduce our ability to raise capital.

We are required to meet certain qualitative and financial tests (including a minimum closing bid price of $1.00 per share for our common stock) to maintain the listing of our common stock on the NASDAQ Stock Market. If we do not maintain compliance with the continued listing requirements for the NASDAQ Stock Market within specified periods and subject to permitted extensions, our common stock may be recommended for delisting (subject to any appeal we would file). If our common stock were delisted, it could be more difficult to buy or sell our common stock and to obtain accurate quotations, and the price of our stock could suffer a material decline. Delisting would also impair our ability to raise capital.

Sales of a substantial number of shares of our common stock in the public market by existing stockholders, or the perception that they may occur, could cause our stock price to decline.

Sales of substantial amounts of our common stock by us or by our stockholders, announcements of the proposed sales of substantial amounts of our common stock or the perception that substantial sales may be made, could cause the market price of our common stock to decline. We may issue additional shares of our common stock in follow-on offerings to raise additional capital, upon the exercise of options or warrants, or in connection with acquisitions or corporate alliances. We also plan to issue additional shares to our employees, directors or consultants in connection with their services to us. All of the currently outstanding shares of our common stock are freely tradable under federal and state securities laws, except for shares held by our directors, officers and certain greater than five percent stockholders, which may be subject to volume limitations. Due to these factors, sales of a substantial number of shares of our common stock in the public market could occur at any time and could reduce the market price of our common stock. 

You may experience future dilution as a result of future equity offerings.

In order to raise additional capital for general corporate purposes, in the future we may offer additional shares of our common stock or other securities convertible into or exchangeable for our common stock at prices that may be lower than the current price per share of our common stock. In addition, investors purchasing shares or other securities in the future could have rights superior to existing stockholders. The price per share at which we sell additional shares of our common stock, or securities convertible or exchangeable into common stock, in future transactions may be higher or lower than the price per share paid by investors in prior offerings.

Our organizational documents and Delaware law make a takeover of our company more difficult, which may prevent certain changes in control and limit the market price of our common stock.

Our certificate of incorporation and bylaws and Section 203 of the Delaware General Corporation Law contain provisions that may have the effect of deterring or delaying attempts by our stockholders to remove or replace management, engage in proxy contests and effect changes in control. These provisions include:

In addition, as a Delaware corporation, we are subject to Delaware law, including Section 203 of the Delaware General Corporation Law. In general, Section 203 prohibits a Delaware corporation from engaging in any business combination with any interested stockholder for a period of three years following the date that the stockholder became an interested stockholder unless certain specific requirements are met as set forth in Section 203. These provisions, alone or together, could have the effect of deterring or delaying changes in incumbent management, proxy contests or changes in control.

These provisions also could discourage proxy contests and make it more difficult for you and other stockholders to elect directors and take other corporate actions. The existence of these provisions could limit the price that investors might be willing to pay in the future for shares of our common stock. Some provisions in our certificate of incorporation and bylaws may deter third parties from acquiring us, which may limit the market price of our common stock. 

We have not paid dividends in the past and do not expect to pay dividends in the future, and any return on investment may be limited to the value of our common stock.

We have never paid dividends on our common stock and do not anticipate paying dividends on our common stock in the foreseeable future. The payment of dividends on our common stock will depend on our earnings, financial condition and other business and economic factors affecting us at such time as our board of directors may consider relevant.  If we do not pay dividends, our common stock may be less valuable because a return on your investment will only occur if our stock price appreciates. 

attorneys, experts and accountants.  We believe the allegations in the complaint are without merit, and intend to defend the action vigorously. 

Except as disclosed in the foregoing paragraph, we are not currently a party to any litigation and we are not aware of any pending or threatened litigation against us that could have a material adverse effect on our business, operating results or financial condition. The medical device industry in which we operate is characterized by frequent claims and litigation, including claims regarding patent and other intellectual property rights as well as improper hiring practices. As a result, we may be involved in various legal proceedings from time to time.