TSX-V: MKO
VANCOUVER, Aug. 26, 2019 /CNW/ - Mako Mining
Corp. (TSX-V: MKO) ("Mako" or the
"Company") is pleased to report positive results from
pre-development work at its wholly-owned San Albino gold project
("San Albino") located in Nueva
Segovia, Nicaragua.
Pre-development work at San Albino consists of exploration pits,
trenches and infill grade-control drilling (see attached
map). The pre-development work commenced in May 2019, with the objectives of: testing the
outer boundaries of the starter pits (West and Central Pits);
confirming gold mineralization within historic mine dumps;
improving the understanding of structural controls; verifying the
geometry, grade and thickness of the mineralized zones; providing
detailed grade control information; and affirming the continuity
and grade of the "in-pit" resources.
The Company utilized the existing model in design of the
exploration pit and trenching program, which resulted in the
discovery of the surface exposure of the Naranjo Zone within the
West Pit and its projected continuation outside of the existing
planned pit boundary. These trenches have exposed and
confirmed the continuity of high-grade, near surface mineralization
in the Naranjo Zone over a strike length of 186 m.
The highlight of the trenching program was near surface,
high-grade gold mineralization of 545.96 g/t Au identified in
SA19-TR-48 (Naranjo Zone), which lies outside the current West Pit
limit at San Albino.
2019 Trench Results in Naranjo Zone
Trench
|
Width
(m)**
|
Au
(g/t)
|
Ag
(g/t)
|
SA19-TR-48*
|
0.5
|
24.92
|
39.0
|
|
0.4
|
10.07
|
26.0
|
|
Spot
Sample***
|
545.96
|
219.0
|
|
Spot
Sample***
|
51.57
|
24.6
|
SA19-TR-41*
|
1.8
|
23.12
|
45.4
|
|
Spot
Sample***
|
30.82
|
45.6
|
|
2.0
|
12.34
|
28.2
|
|
2.0
|
5.17
|
15.5
|
SA19-TR-40
|
1.3
|
2.94
|
2.3
|
SA19-EP-14
|
1.2
|
8.56
|
16.7
|
|
1.2
|
7.58
|
11.2
|
The mineralized intervals shown above utilize a 1.0 g/t gold
cut-off grade with not more than 1.0 meter of internal dilution.
*Indicates metallic screen assay results. **Width of the samples
represents a vertical width of samples taken across the shallow
dipping vein. Typical true widths are 90-100% of the sample
interval ***Spot samples are continuous chip samples taken parallel
to the dip of the vein and do not represent the actual thickness of
the vein. These samples are taken to determine the short
scale variability and continuity of gold grade. Individual
samples range from 0.4 meters to 2.0 meters in length.
In order to receive more accurate and representative assay
results in this high-grade vein system containing coarse gold, the
Company has implemented a procedure that all mineralized intervals
which return one gram or better in the fire assay will be
reanalyzed using a metallic screen method. As of the date of
this disclosure, the Company has received metallic screen assays
from SA19-TR-48 and SA19-TR-41, as listed above. The
remaining metallic screen assays will be released as received.
In addition to exploration pits and trenches, 56 holes were
drilled within the West and Central Pits totaling 1,800 m as part of the pre-development work at
San Albino.
Specifically, two drill holes, SA19-143 and SA19-177, were
drilled situated 80 m apart and along
strike of the Naranjo Zone (see attached long section) targeting a
down dip extension of the newly identified high-grade
mineralization from SA19-TR-48. Results from SA19-143 have
confirmed 120 m of down dip extension
of the Naranjo Zone highlighted by 17.80 g/t Au and 18.9 g/t Ag
over 1.3 m. Studies are
currently underway to determine if this near surface mineralization
can be incorporated into the West Pit mine plan. Further, it
suggests that the mineralization may still be open in all
directions. Results from SA19-177 are pending.
2019 Diamond Drill Results in the Naranjo Zone
Drill
Hole
|
From
(m)
|
To
(m)
|
Width
(m)*
|
Au
(g/t)
|
Ag
(g/t)
|
Zone
|
SA19-143
|
6.00
|
7.50
|
1.50
|
2.90
|
8.1
|
San Albino Zone
historic dumps
|
|
78.60
|
79.90
|
1.30
|
17.80
|
18.9
|
Naranjo
Zone
|
|
82.00
|
82.80
|
0.80
|
1.34
|
6.0
|
Naranjo
Zone
|
SA19-177
|
Results
pending
|
Targeting Naranjo
Zone
|
The mineralized intervals shown above utilize a 1.0 g/t gold
cut-off grade with not more than 1.0 meter of internal dilution.
Lengths are reported as core lengths. *True widths vary depending
on drill hole dip, the veins are shallow dipping and typical true
widths are 85-100% of the downhole width.
To advance the pre-development work at San Albino, two more
drills have been mobilized to site, which should allow for an
additional 6,000 m of drilling before
yearend.
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to
termination of the drill hole. Sample intervals were
typically one meter. Drill core diameter was HQ (6.35
centimeters). Geologic and geotechnical data was captured
into a digital database, core was photographed, then one-half split
of the core was collected for analysis and one-half was retained in
the core library. Samples were kept in a secured logging and
storage facility until such time that they were delivered to the
Managua facilities of Bureau
Veritas and pulps were sent to the Bureau Veritas laboratory in
Vancouver for analysis. Gold
was analyzed by standard fire assay fusion, 30gram aliquot, AAS
finish. Samples returning over 10.0 g/t gold are analyzed
utilizing standard Fire Assay-Gravimetric method. Due to the
presence of coarse gold, the Company has used 500-gram metallic
screened gold assays for analyzing samples that yielded a fire
assay result greater than 1 g/t, and samples immediately above and
below drilled veins. This method, which analyzes a larger
sample, can be more precise in high-grade vein systems containing
coarse gold. All reported drill results in this press release used
the metallic screening method. The Company follows industry
standards in its QA&QC procedures. Control samples consisting
of duplicates, standards, and blanks were inserted into the sample
stream at a ratio of 1 control sample per every 10 samples.
Analytical results of control samples confirmed reliability of the
assay data.
Qualified Person
John M. Kowalchuk, P.Geo, a
geologist and qualified person (as defined under NI 43-101) has
read and approved the technical information contained in this press
release. Mr. Kowalchuk is a senior geologist and a consultant to
the Company.
On behalf of the Board,
"Akiba Leisman"
CEO
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration firm. The Company is developing its high-grade San
Albino gold project in Nueva
Segovia, Nicaragua. Mako's
primary objective is to bring San Albino into production quickly
and efficiently, while continuing exploration of prospective
targets in Nicaragua.
Forward-Looking Statements: Some of the
statements contained herein may be considered "forward-looking
information" within the meaning of applicable securities
laws. Forward-looking information is based on certain
expectations and assumptions, including that the Company's
exploration programs will be successfully completed; that although
the Company's production decision at its San Albino project is not
based on a technical study supporting mineral reserves, and
therefore not based on demonstrated economic viability, management
currently believes the project is on track to achieve its first
gold pour by the late summer of 2020; that the Company will be
successful in its proposed financing plans necessary for the
construction at the San Albino project. Such forward-looking
information is subject to a variety of risks and uncertainties
which could cause actual events or results to differ materially
from those reflected in the forward-looking information, including,
without limitation, the risks that additional satisfactory
exploration results at San Albino and Las Conchitas will not be
obtained; that the PEA is preliminary in nature and there is no
certainty that the PEA will be realized; the risk of economic
and/or technical failure at the San Albino project associated with
basing a production decision on the PEA without demonstrated
economic and technical viability; that exploration results will not
translate into the discovery of an economically viable deposit;
risks and uncertainties relating to political risks involving the
Company's exploration and development of mineral properties
interests; the inherent uncertainty of cost estimates and the
potential for unexpected costs and expense; commodity price
fluctuations, the inability or failure to obtain adequate financing
on a timely basis and other risks and uncertainties. Such
information contained herein represents management's best judgment
as of the date hereof, based on information currently available and
is included for the purposes of providing investors with the
Company's plans and expectations at its San Albino project and the
Las Conchitas area, and may not be appropriate for other
purposes. Mako does not undertake to update any
forward-looking information, except in accordance with applicable
securities laws.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
SOURCE Mako Mining Corp.