TIDMARS
RNS Number : 2894C
Asiamet Resources Limited
14 June 2019
14 June 2019
BKM Maiden Ore Reserve
Asiamet Resources Limited ("Asiamet", "ARS", or the "Company")
is pleased to announce a maiden Ore Reserve for the Beruang Kanan
Main ("BKM") copper deposit located in Central Kalimantan,
Indonesia. Asiamet holds a 100% interest in BKM project through its
operating subsidiary PT Kalimantan Suraya Kencana (PT KSK). The
Statement of Ore Reserves in Table 1 completed by Australian Mine
Design and Development Pty Ltd ("AMDAD") is reported in accordance
with the requirements of the 2012 JORC Code.
Highlights:
-- BKM 2019 Ore Reserves (JORC Code 2012) comprise:
-- 21.1Mt @ 0.6% Cu for 137k contained tonnes of copper in the Proved category
-- 30.4Mt @ 0.5% Cu, for 166k contained tonnes of copper in the Probable category
-- 51.5Mt @ 0.6% Cu, for 303k contained tonnes of copper in the Proved and Probable category
-- Ore Reserves are for the extraction by open-pit mining and
processing by heap-leach and Solvent Extraction - Electrowinning
("SX-EW")
-- Very strong conversion of Measured and Indicated Resource to
Reserve highlights positive attributes and robustness of the BKM
deposit.
-- 94% conversion of Measure and Indicated Resource tons to
Proven and Probable Ore Reserve (tonnes) and 74% conversion of
Total Resource to Total Ore Reserves (tonnes)
Peter Bird, Asiamet's Chief Executive Officer commented:
"We are very pleased to deliver a maiden Ore Reserve for the BKM
copper project, a major milestone which assesses the economic
viability of the project. Ore Reserves represent that part of the
Resource base which can be economically extracted using the
parameters defined in the BKM Feasibility Study and provide the
underlying foundations of the project. The very strong conversion
of Resource to Reserve tonnages fully validates our belief that the
BKM project represents a robust mid-size copper project with
excellent potential for mine life extensions through further
exploration and development.
The BKM project lies in a very prospective mineral district and
is one of a few copper development projects close to the main
consumer markets in Asia, at a time when the copper market is
forecast to move into a supply deficit due to a lack of investment
in exploration and development over the past 10 years. The BKM
Copper project remains strongly positioned to capitalise on its
proposed development timeline."
Table 1. The BKM Ore Reserve Estimate is summarised in the table
below, June 2019 (100% Basis)
Ore Reserve Category Volume Tonnes Total Soluble Contained Copper
Copper Copper Total Soluble
Mbcm Mt % % kt kt
------- ------- ------- -------- -------- ---------
Proved Ore
------- ------- ------- -------- -------- ---------
Chalcocite dominant 5.2 14.9 0.7 0.5 103 77
------- ------- ------- -------- -------- ---------
Covellite/Bornite dominant 1.6 4.4 0.5 0.5 24 20
------- ------- ------- -------- -------- ---------
Chalcopyrite dominant 0.6 1.9 0.6 0.2 11 3
------- ------- ------- -------- -------- ---------
Total Proved Ore 7.4 21.1 0.6 0.5 137 101
------- ------- ------- -------- -------- ---------
Probable Ore
------- ------- ------- -------- -------- ---------
Chalcocite dominant 5.8 15.4 0.6 0.4 88 63
------- ------- ------- -------- -------- ---------
Covellite/Bornite dominant 2.9 7.8 0.5 0.4 40 31
------- ------- ------- -------- -------- ---------
Chalcopyrite dominant 2.7 7.2 0.5 0.1 38 11
------- ------- ------- -------- -------- ---------
Total Probable Ore 11.4 30.4 0.5 0.3 166 105
------- ------- ------- -------- -------- ---------
Proved + Probable Ore
------- ------- ------- -------- -------- ---------
Chalcocite dominant 11.0 30.2 0.6 0.5 190 140
------- ------- ------- -------- -------- ---------
Covellite/Bornite dominant 4.5 12.2 0.5 0.4 64 51
------- ------- ------- -------- -------- ---------
Chalcopyrite dominant 3.3 9.1 0.5 0.2 49 14
------- ------- ------- -------- -------- ---------
Total Proved and Probable
Ore 18.8 51.5 0.6 0.4 303 206
------- ------- ------- -------- -------- ---------
Waste Rock 33.1 85.0
------- ------- ------- -------- -------- ---------
Waste : Ore Ratio 1.8 1.7
------- ------- ------- -------- -------- ---------
Notes:
The tonnes and grades shown in the 'Totals' rows are stated to a
number of significant figures reflecting the confidence of the
estimate. The table may nevertheless show apparent inconsistencies
between the sum of components and the corresponding rounded
totals.
The Ore Reserves are reported within the final pit design
forming the basis of the Feasibility Study. They do not include
Inferred Mineral Resources. The Ore Reserves treat Inferred
Resources within the pit design as waste rock.
The Ore Reserves are reported against a variable economic
cut-off grade which takes account of the ore type and varying
conditions over the project life.
Additional information to accompany the Ore Reserve
Statement:
-- The Ore Reserves have been compiled as part of the
Feasibility Study (FS) which incorporates additional drilling and
further information gathered to further enhance the project (see
announcement dated 18 October 2018). The FS covers all aspects of
the project including:
-- Mineral Resource estimation,
-- Geotechnical assessment of pit wall slopes based on drilling, mapping, rock strength testing, hydrogeological assessment and numerical modelling,
-- Heap leach assessment based on column test work and heap
stability and permeability assessment,
-- Mine cost estimation based on detailed budget pricing from
experienced local mining contractors,
-- Detailed design of the heap leach pad earthworks, liners and reticulation,
-- Detailed design of the crushing, conveying and stacking system,
-- Detailed design of the SX-EW and water treatment facilities,
-- Process cost estimation for the designed facilities matched
to the scheduled ore feed from the mine,
-- Site services and administration cost estimation,
-- Copper price forecasting for cathode product,
-- Transport cost estimation for cathode to market,
-- Enterprise optimisation based on the above parameters to
define the pit shape and overall strategic plan,
-- Detailed pit design including staging and design of access
for ore and waste to the ROM pad and waste rock dump
respectively,
-- Detailed production scheduling of the mine and cathode production from the heap leach,
-- Capital costs for the above items based primarily on quotations,
-- Sustaining capital cost estimation,
-- Mine closure cost estimation,
-- Financial modelling,
-- Environmental and social assessment through the Indonesian
Environmental and Social Impact Assessment (AMDAL) process.
-- The Ore Reserve estimate is derived from the June 2019 BKM
Resource estimate by application of Modifying Factors. The Company
is not aware of any changes which could affect this Resource
Estimate
-- The Ore Reserve estimate is reported within the final pit
design forming the basis of the Feasibility Study. It does not
include Inferred Mineral Resources. The Ore Reserve estimate treats
Inferred Resources within the pit design as waste rock
-- Conventional open cut mining methods will be used. Mining
recovery was assumed to be 97% and mining dilution was assumed as
9% at zero grade
-- Copper ore will be processed using heap leaching with
sulphuric acid and SX-EW to produce copper cathodes on site. Ore
from the pits will be crushed and, if required, agglomerated prior
to conveyor stacking on the heap leach pads
-- Project assessment is based on the soluble copper portion of
the mineralisation which was determined using extensive sequential
assays throughout the deposit
-- Final terminal processing recovery assumptions for the three ore types are:
-- Chalcocite - 80% of soluble copper
-- Covellite/bornite - 75% soluble copper
-- Chalcopyrite - variable via regression formula, with an average of 77% soluble copper
-- Cut-off grades are variable over the three ore types over the
mine life taking into account time-variable assumptions and the
goal of maximising NPV of the BKM project
-- Optimisation of pit design and production scheduling using
Whittle Consulting's Enterprise Optimisation. Enterprise
Optimisation considers all the physical aspects (such as material
movements and processing rates, ore loss and dilution, processing
recoveries and cut-off grades) and commercial aspects (such as
varying operating and capital costs, commodity prices, discount
rates, tax etc) of the project and constraints imposed by factors
such as environmental or social requirements to take a broader view
of the project and not only improve value but also improve
confidence by better aligning the overall strategic plan with all
the factors influencing it
-- Mine operating costs are based on quotations from two major
experienced Indonesia based mining contractors, a detailed
explosives supply quotation and the current diesel price
-- Process operating costs are based on a detailed quotation for
power supply, vendor quotes for acid and other consumables, current
Indonesian labour rates and detailed estimates of equipment
operating costs
-- General and administrative costs are estimated for the
planned workforce and a detailed list of non-operating tasks and
resources
-- Capital costs are mainly estimated using vendor quotes
applied to equipment items and material take offs for earthworks
and construction items designed to a Feasibility Study standard
-- Royalties are as set by the Government of Indonesia
-- Cost estimates cover the periods through construction, operation, closure and post closure
-- Copper price assumptions (used for the June 2019 FS and Ore
Reserve Estimate) are variable over the project life and are based
on long-term analyst consensus price forecasts for copper from a
range of global banks who have active research in copper and other
commodities
-- A discount rate of 8% pa was applied and references the
Company's weighted average cost of capital
A copy of the BKM 2019 Ore Reserve Statement, including the full
JORC Table 1 is available on the Company's website at
www.asiametresources.com and appended to this announcement via the
following link
www.asiametresources.com/assets/pdf/ars_pdf_3_reserves.pdf
Competent Person and Qualified Person's Statement
The Competent Person for the Ore Reserves is Mr John Wyche who
is a full time employee of Australian Mine Design and Development
Pty Ltd. Mr Wyche is a Member of the Australasian Institute of
Mining and Metallurgy. He has 32 years of experience with the BKM
style of mineralisation and type of mining. He has consented to be
named as the Competent Person for the Ore Reserves. Ore Reserves
are presented in the document "Ore Reserves Statement, BKM Copper
Project, Central Kalimantan, Indonesia".
Data disclosed in this press release have been reviewed and
verified by Mr John Wyche acting as an appointed adviser to
Asiamet. Mr Wyche is a Competent Person within the meaning of the
JORC Code 2012 and a Qualified Person for the purposes of the AIM
Rules for Companies.
ON BEHALF OF THE BOARD OF DIRECTORS
Peter Bird, Deputy Chairman and CEO
For further information, please contact:
-Ends-
Peter Bird
Deputy Chairman and CEO, Asiamet Resources Limited
Telephone: +61 3 8644 1300
Email: peter.bird@asiametresources.com
Tony Manini
Executive Chairman, Asiamet Resources Limited
Telephone: +61 3 8644 1300
Email: tony.manini@asiametresources.com
FlowComms Limited
Sasha Sethi
Telephone: +44 (0) 7891 677 441
Email: Sasha@flowcomms.com
Asiamet Resources Nominated Adviser
RFC Ambrian Limited
Andrew Thomson / Stephen Allen
Telephone: +61 8 9480 2500
Email: Andrew.Thomson@rfcambrian.com /
Stephen.Allen@rfcambrian.com
Berenberg
Matthew Armitt, Detlir Elezi
Telephone: +44 20 3753 3142
Email: Matthew.Armitt@berenberg.com /
Detlir.Elezi@berenberg.com
Liberum
Clayton Bush, Kane Collings
Telephone: +44 7773 322679
Email: Claytong.Bush@liberum.com
Optiva Securities Limited
Christian Dennis
Telephone: +44 20 3137 1903
Email: Christian.Dennis@optivasecurities.com
Follow us on twitter @AsiametTweets
This news release contains forward-looking statements that are
based on the Company's current expectations and estimates.
Forward-looking statements are frequently characterised by words
such as "plan", "expect", "project", "intend", "believe",
"anticipate", "estimate", "suggest", "indicate" and other similar
words or statements that certain events or conditions "may" or
"will" occur. Such forward-looking statements involve known and
unknown risks, uncertainties and other factors that could cause
actual events or results to differ materially from estimated or
anticipated events or results implied or expressed in such
forward-looking statements. Such factors include, among others: the
actual results of current exploration activities; conclusions of
economic evaluations; changes in project parameters as plans
continue to be refined; possible variations in ore grade or
recovery rates; accidents, labour disputes and other risks of the
mining industry; delays in obtaining governmental approvals or
financing; and fluctuations in metal prices. There may be other
factors that cause actions, events or results not to be as
anticipated, estimated or intended. Any forward-looking statement
speaks only as of the date on which it is made and, except as may
be required by applicable securities laws, the Company disclaims
any intent or obligation to update any forward-looking statement,
whether as a result of new information, future events or results or
otherwise. Forward-looking statements are not guarantees of future
performance and accordingly undue reliance should not be put on
such statements due to the inherent uncertainty therein.
This announcement contains inside information as stipulated
under the Market Abuse Regulations (EU) no. 596/2014 ("MAR").
Glossary of Technical Terms
"anomaly or anomalous" something in mineral exploration that geologists
interpret as deviating from what is standard, normal,
or expected.
"assay" The laboratory test conducted to determine the proportion
of a mineral within a rock or other material. For
copper, usually reported as percentage which is
equivalent to percentage of the mineral (i.e. copper)
per tonne of rock.
-------------------------------------------------------------------
"azimuth" the "compass direction" refers to a geographic bearing
or azimuth as measured by a magnetic compass, in
true or magnetic north.
-------------------------------------------------------------------
"bornite" Bornite, also known as peacock ore, is a copper
sulphide mineral with the formula Cu(5) FeS(4) .
-------------------------------------------------------------------
"breccia" Breccia is a rock classification, comprises millimetre
to metre-scale rock fragments cemented together
in a matrix, there are many sub-classifications
of breccias.
-------------------------------------------------------------------
"chalcocite" Chalcocite is a copper sulphide mineral with the
formula Cu(2) S and is an important copper ore mineral.
It is opaque and dark-gray to black with a metallic
luster.
-------------------------------------------------------------------
"chalcopyrite" Chalcopyrite is a copper sulphide mineral with formula
CuFeS(2) . It has a brassy to golden yellow colour.
-------------------------------------------------------------------
"channel sample" Samples collected across a mineralised rock exposure.
The channel is typically orientated such that samples
are collected perpendicular to the mineralised structure,
if possible.
-------------------------------------------------------------------
"chargeability" Chargeability is a physical property related to
conductivity. Chargeability is used to characterise
the formation and strength of the induced polarisation
within a rock, under the influence of an electric
field, suggesting sulphide mineralisation at depth.
-------------------------------------------------------------------
"covellite" Covellite is a copper sulphide mineral with the
formula CuS. This indigo blue mineral is ubiquitous
in some copper ores.
-------------------------------------------------------------------
"diamond drilling" A drilling method in which penetration is achieved
through abrasive cutting by rotation of a diamond
encrusted drill bit. This drilling method enables
collection of tubes of intact rock (core) and when
successful gives the best possible quality samples
for description, sampling and analysis of an ore
body or mineralised structure.
-------------------------------------------------------------------
"digenite" Digenite is a copper sulfide mineral with formula
Cu(9) S(5) . Digenite is a black to dark blue opaque
mineral.
-------------------------------------------------------------------
"dip" A line directed down the steepest axis of a planar
structure including a planar ore body or zone of
mineralisation. The dip has a measurable direction
and inclination from horizontal.
-------------------------------------------------------------------
"galena" Galena is the natural mineral form of lead (II)
sulphide, with formula PbS. It is the most important
ore of lead and an important source of silver. It
has a silver colour.
-------------------------------------------------------------------
"grab sample" are samples of rock material collected from a small
area, often just a few pieces or even a single piece
of rock "grabbed" from a face, dump or outcrop or
roughly 2-5kg. These are common types of rock samples
collected when conducting mineral exploration. The
sample usually consists of material that is taken
to be representative of a specific type of rock
or mineralisation.
-------------------------------------------------------------------
"grade" The proportion of a mineral within a rock or other
material. For copper mineralisation this is usually
reported as % of copper per tonne of rock (g/t).
-------------------------------------------------------------------
"g/t" grams per tonne; equivalent to parts per million
('ppm')
-------------------------------------------------------------------
"hematite" Hematite is the mineral form of iron(III) oxide
(Fe(2) O(3) ), one of several iron oxides. Magnetite
alteration is also typically associate with porphyry
copper systems, at or close to the central core.
-------------------------------------------------------------------
"hypogene" Hypogene ore processes occur deep below the earth's
surface, and form deposits of primary minerals,
such as chalcopyrite and bornite.
-------------------------------------------------------------------
"Indicated Resource" An 'Indicated Mineral Resource' is that part of
a Mineral Resource for which quantity, grade (or
quality), densities, shape and physical characteristics
are estimated with sufficient confidence to allow
the application of Modifying Factors in sufficient
detail to support mine planning and evaluation of
the economic viability of the deposit.
Geological evidence is derived from adequately detailed
and reliable exploration, sampling and testing gathered
through appropriate techniques from locations such
as outcrops, trenches, pits, workings and drill
holes, and is sufficient to assume geological and
grade (or quality) continuity between points of
observation where data and samples are gathered.
An Indicated Mineral Resource has a lower level
of confidence than that applying to a Measured Mineral
Resource and may only be converted to a Probable
Ore Reserve.
-------------------------------------------------------------------
"Inferred Resource" An 'Inferred Mineral Resource' is that part of a
Mineral Resource for which quantity and grade (or
quality) are estimated on the basis of limited geological
evidence and sampling. Geological evidence is sufficient
to imply but not verify geological and grade (or
quality) continuity. It is based on exploration,
sampling and testing information gathered through
appropriate techniques from locations such as outcrops,
trenches, pits, workings and drill holes.
An Inferred Mineral Resource has a lower level of
confidence than that applying to an Indicated Mineral
Resource and must not be converted to an Ore Reserve.
It is reasonably expected that the majority of Inferred
Mineral Resources could be upgraded to Indicated
Mineral Resources with continued exploration.
-------------------------------------------------------------------
"Induced Polarisation Induced polarisation (IP) is a geophysical survey
Geophysics" used to identify the electrical chargeability of
subsurface materials, such as sulphides. The survey
involves an electric current that is transmitted
into the subsurface through two electrodes, and
voltage is monitored through two other electrodes.
-------------------------------------------------------------------
"intercept" Refers to a sample or sequence of samples taken
across the entire width or an ore body or mineralised
zone. The intercept is described by the entire thickness
and the average grade of mineralisation.
-------------------------------------------------------------------
JORC The Australasian Code for Reporting of Exploration
Results, Mineral Resources and Ore Reserves ('the
JORC Code') is a professional code of practice that
sets minimum standards for Public Reporting of minerals
Exploration Results, Mineral Resources and Ore Reserves.
The JORC Code provides a mandatory system for the
classification of minerals Exploration Results,
Mineral Resources and Ore Reserves according to
the levels of confidence in geological knowledge
and technical and economic considerations in Public
Reports.
-------------------------------------------------------------------
"lbs" Pounds (measure of weight)
-------------------------------------------------------------------
"Mlbs" Million pounds (measure of weight)
-------------------------------------------------------------------
"magnetite" Magnetite is main iron ore mineral, with chemical
formula Fe(3) O(4) . Magnetite is ferromagnetic,
and it is attracted to a magnet and can be magnetised
to become a permanent magnet itself.
-------------------------------------------------------------------
"massive" In a geological sense, refers to a zone of mineralisation
that is dominated by sulphide minerals. The sulphide-mineral-rich
material can occur in centimetre-scale, metre-scale
or in tens of metres wide veins, lenses or sheet-like
bodies containing sphalerite, galena, and / or chalcopyrite
etc.
-------------------------------------------------------------------
"Measured Resource" A 'Measured Mineral Resource' is that part of a
Mineral Resource for which quantity, grade (or quality),
densities, shape, and physical characteristics are
estimated with confidence sufficient to allow the
application of Modifying Factors to support detailed
mine planning and final evaluation of the economic
viability of the deposit.
Geological evidence is derived from detailed and
reliable exploration, sampling and testing gathered
through appropriate techniques from locations such
as outcrops, trenches, pits, workings and drill
holes, and is sufficient to confirm geological and
grade (or quality) continuity between points of
observation where data and samples are gathered.
A Measured Mineral Resource has a higher level of
confidence than that applying to either an Indicated
Mineral Resource or an Inferred Mineral Resource.
It may be converted to a Proved Ore Reserve or under
certain circumstances to a Probable Ore Reserve.
-------------------------------------------------------------------
"Mineral Resource" A "Mineral Resource" is a concentration or occurrence
of diamonds, natural solid inorganic material, or
natural solid fossilised organic material including
base and precious metals, coal, and industrial minerals
in or on the Earth's crust in such form and quantity
and of such a grade or quality that it has reasonable
prospects for economic extraction. The location,
quantity, grade, geological characteristics and
continuity of a Mineral Resource are known, estimated
or interpreted from specific geological evidence
and knowledge.
-------------------------------------------------------------------
"mineralisation" In geology, mineralisation is the deposition of
economically important metals (copper, gold, lead,
zinc etc) that in some cases can be in sufficient
quantity to form mineral ore bodies.
-------------------------------------------------------------------
"open pit mining" A method of extracting minerals from the earth by
excavating downwards from the surface such that
the ore is extracted in the open air (as opposed
to underground mining).
-------------------------------------------------------------------
"outcrop" A section of a rock formation or mineral vein that
appears at the surface of the earth. Geologists
take direct observations and samples from outcrops,
used in geologic analysis and creating geologic
maps. In situ (in place) measurements are critical
for proper analysis of the geology and mineralisation
of the area under investigation.
-------------------------------------------------------------------
"polymetallic" three or more metals that may occur in magmatic,
volcanogenic, or hydrothermal environments; common
base and precious metals include copper, lead, zinc,
silver and gold.
-------------------------------------------------------------------
"polymict" A geology term, often applied to breccias or conglomerates,
which identifies the composition as consisting of
fragments of several different rock types.
-------------------------------------------------------------------
"porphyry" Porphyry copper deposits are copper +- gold +- molybdenum
orebodies that are formed from hydrothermal fluids
that originate from a voluminous magma chamber below
the deposit itself.
-------------------------------------------------------------------
"Preliminary NI 43-101 defines a PEA as "a study, other than
Economic Assessment" a pre-feasibility study or feasibility study, which
includes an economic analysis of the potential viability
of mineral Resources".
-------------------------------------------------------------------
"propylitic alteration" Propylitic alteration is the chemical alteration
of minerals within a rock, caused by hydrothermal
fluids. This style of alteration typically results
in epidote-chlorite+-albite alteration and veining
or fracture filling, commonly altering biotite or
amphibole minerals within the rock groundmass. It
typically occurs along with pyrite.
-------------------------------------------------------------------
"sediments" Sedimentary rocks formed by the accumulation of
sediments. There are three types, Clastic, Chemical
and Organic sedimentary rocks.
-------------------------------------------------------------------
"sequential assays" Sequential copper analysis is a technique to semi-quantitatively
define the zonations associated with some copper
deposits. The method is based on the partial dissolution
behaviour displayed by the prevalent copper minerals
to solutions containing sulphuric acid and sodium
cyanide. Results from sequential analyses can theoretically
determine the amounts of leachable oxide minerals,
leachable secondary sulphide minerals, and primary
copper minerals, respectively.
-------------------------------------------------------------------
"sphalerite" Sphalerite is a zinc sulphide in crystalline form
but almost always contains variable iron, with formula
(Zn,Fe)S. It can have a yellowish to honey brown
or black colour.
-------------------------------------------------------------------
"supergene" Supergene ore processes occur near surface, and
form deposits of secondary minerals, such as malachite,
azurite, chalcocite, covellite, digenite, etc.
-------------------------------------------------------------------
"surface rock Rock chip samples approximately 2kg in size that
chip samples" are typically collected from surface outcrops exposed
along rivers and mountain ridgelines.
-------------------------------------------------------------------
"veins" A vein is a sheet-like or anastomosing fracture
that has been infilled with mineral ore (chalcopyrite,
covellite etc) or mineral gangue (quartz, calcite
etc) material, within a rock. Veins form when minerals
carried by an aqueous solution within the rock mass
are deposited through precipitation and infill or
coat the fracture faces.
-------------------------------------------------------------------
"volcanics" Volcanic rock such as andesite or basalt that is
formed from magma erupted from a volcano, or hot
clastic material that erupts from a volcano and
is deposited as volcaniclastic or pyroclastics.
-------------------------------------------------------------------
This information is provided by RNS, the news service of the
London Stock Exchange. RNS is approved by the Financial Conduct
Authority to act as a Primary Information Provider in the United
Kingdom. Terms and conditions relating to the use and distribution
of this information may apply. For further information, please
contact rns@lseg.com or visit www.rns.com.
END
UPDFMGMVKDNGLZG
(END) Dow Jones Newswires
June 14, 2019 02:00 ET (06:00 GMT)
Asiamet Resources (LSE:ARS)
Historical Stock Chart
From Jun 2024 to Jul 2024
Asiamet Resources (LSE:ARS)
Historical Stock Chart
From Jul 2023 to Jul 2024