SECURITIES
AND EXCHANGE COMMISSION
Washington,
D.C. 20549
Form
6-K
Report
of Foreign Private Issuer
Pursuant
to Rule 13a-16 or 15d-16
under
the Securities Exchange Act of 1934
For
the month of: September 2024 (Report No. 2)
Commission
file number: 001-37600
NANO
DIMENSION LTD.
(Translation
of registrant’s name into English)
2
Ilan Ramon
Ness
Ziona 7403635 Israel
(Address
of principal executive offices)
Indicate
by check mark whether the registrant files or will file annual reports under cover of Form 20-F or Form 40-F.
Form
20-F ☒ Form 40-F ☐
CONTENTS
On
September 25, 2024, Nano Dimension Ltd. (the “Company” or “Nano”) issued a press release announcing, among other
things, the entry into an Agreement and Plan of Merger, by and among the Company, Nano US II, Inc., a Delaware corporation and an indirect
wholly owned subsidiary of the Company, and Markforged Holding Corporation, a Delaware corporation (“Markforged”), a copy
of the press release is furnished herewith as Exhibit 99.1 and incorporated by reference herein.
The first and fourth paragraphs and the
section titled “Forward-Looking Statements and Other Disclaimers” of the press release attached hereto as Exhibit 99.1
are incorporated by reference into the Company’s registration statements on Form F-3 (File No. 333-255960, 333-233905, 333-252848,
and 333-278368) and Form
S-8 (File No. 333-214520, 333-248419 and 333-269436),
filed with the Securities and Exchange Commission (the “SEC”), to be a part thereof from the date on which this report
is submitted, to the extent not superseded by documents or reports subsequently filed or furnished.
No
Offer or Solicitation
This
communication is not intended to and shall not constitute an offer to buy or sell or the solicitation of an offer to buy or sell any
securities, or a solicitation of any vote or approval, nor shall there be any sale of securities in any jurisdiction in which such offer,
solicitation or sale would be unlawful prior to registration or qualification under the securities laws of any such jurisdiction. No
offering of securities shall be made, except by means of a prospectus meeting the requirements of Section 10 of the U.S. Securities Act
of 1933, as amended.
Additional
Information about the Transaction and Where to Find It
In
connection with the proposed transaction, Markforged intends to file with the SEC a proxy statement (the “Proxy Statement”).
Markforged may also file other relevant documents with the SEC regarding the proposed transaction. This document is not a substitute
for the Proxy Statement or any other document that Markforged may file with the SEC. The definitive Proxy Statement (if and when available)
will be mailed to shareholders of Markforged. INVESTORS AND SECURITY HOLDERS ARE URGED TO READ THE PROXY STATEMENT AND ANY OTHER RELEVANT
DOCUMENTS THAT MAY BE FILED WITH THE SEC, AS WELL AS ANY AMENDMENTS OR SUPPLEMENTS TO THESE DOCUMENTS, CAREFULLY AND IN THEIR ENTIRETY
IF AND WHEN THEY BECOME AVAILABLE BECAUSE THEY CONTAIN OR WILL CONTAIN IMPORTANT INFORMATION ABOUT THE PROPOSED TRANSACTION. Investors
and security holders will be able to obtain free copies of the Proxy Statement (if and when available) and other documents containing
important information about Markforged and the proposed transaction, once such documents are filed with the SEC through the website maintained
by the SEC at http://www.sec.gov. Copies of the documents filed with the SEC by the Company will be available free of charge on the Company’s
website at https://investors.nano-di.com/sec-filings-1/default.aspx.
Participants
in the Solicitation
The
Company, Markforged and certain of their respective directors and executive officers may be deemed to be participants in the solicitation
of proxies in respect of the proposed transaction. Information about the directors and executive officers of the Company, including a
description of their direct or indirect interests, by security holdings or otherwise, is set forth in the Company’s Annual Report
on Form 20-F for the fiscal year ended December 31, 2023, which was filed with the SEC on March 21, 2024. Information about the directors
and executive officers of Markforged, including a description of their direct or indirect interests, by security holdings or otherwise,
is set forth in Markforged’s proxy statement for its 2024 Annual Meeting of Stockholders, which was filed with the SEC on April
26, 2024 and Markforged’s Annual Report on Form 10-K for the fiscal year ended December 31, 2023, which was filed with the SEC
on March 15, 2024. Other information regarding the participants in the proxy solicitation and a description of their direct and indirect
interests, by security holdings or otherwise, will be contained in the Proxy Statement and other relevant materials to be filed with
the SEC regarding the proposed transaction when such materials become available. Investors should read the Proxy Statement carefully
when it becomes available before making any voting or investment decisions. You may obtain free copies of these documents from the Company
or Markforged using the sources indicated above.
SIGNATURES
Pursuant
to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by
the undersigned, thereunto duly authorized.
| |
Nano Dimension Ltd. |
| |
(Registrant) |
| |
|
|
| Date: September 25, 2024 |
By: |
/s/ Dotan
Bar-Natan |
| |
Name: |
Dotan Bar-Natan |
| |
Title: |
General Counsel |
2
Exhibit
99.1
Nano Dimension to Acquire Markforged, Creating a Leading Player in
Additive Manufacturing (“AM”) With the Technologies Expected to Drive Future Growth
Merging of Nano Dimension with Desktop Metal
and Markforged Will Have the Scale and Capital to Drive to Profitable Expansion With a Combined 2023 Revenue of $340M
Cash & Cash Equivalents Expected at Close of ~$475M
The Combined Company Further Increases Value
Creation Opportunity With an Even Broader AM/3D Printing Portfolio
Technologies Intended for True Manufacturing Applications
Nano Dimension and Markforged to Hold Joint
Investor Call to Discuss the Transaction Tomorrow, Thursday, September 26th, at 8:30 AM ET
WALTHAM, Mass., Sept. 25, 2024 (GLOBE NEWSWIRE) -- Nano Dimension Ltd.
(Nasdaq: NNDM) (“Nano Dimension”) and Markforged Holding Corporation (NYSE: MKFG) (“Markforged”) today jointly
announced that they have entered into a definitive agreement pursuant to which Nano Dimension will acquire all outstanding shares of Markforged
in an all-cash transaction for $5.00 per share.
In acquiring Markforged, Nano Dimension is acquiring a company with
scale and efficiency. Markforged’s 2023 revenue was $93.8 million with a 47.4% gross margin and 48.6% non-GAAP gross margin, and
a second quarter of 2024 gross margin of 48.3% and non-GAAP gross margin of 51.9%, with potential to expand further. The combined company
post-closing, including both Desktop Metal and Markforged, is expected to have a strong balance sheet with a total expected cash &
cash equivalents, which includes marketable securities, of $475 million.
Nano Dimension is poised to lead the industry with its July 3rd,
2024 announced agreement to acquire Desktop Metal, Inc. (NYSE: DM) (“Desktop Metal”), and the Markforged acquisition is expected
to further expand Nano Dimension’s leadership in AM. The combined Nano Dimension-Desktop Metal company would have a revenue based
on fiscal year 2023 of $246 million and, as of today’s announcement, the combined company – Nano Dimension, Desktop Metal,
and now Markforged – would have a combined revenue based on fiscal year 2023 of $340 million, along with a clear path to profitability.
The aggregate total consideration payable to Markforged’s shareholders
is $115 million. This is based on $5.00 per share, which represents a 71.8% premium to Markforged’s September 24th, 2024
VWAP and a 67.8% premium to Markforged’s 90 day VWAP as of September 24th, 2024.
As of June 30th, 2024, Markforged had cash and cash equivalents, including
restricted cash, of $93.9 million. Restricted cash includes $19.1 million to cover certain liabilities associated with the Continuous
Composites lawsuit.
Yoav Stern, Chief Executive Officer and member of the board of directors
of Nano Dimension, said, “In combining with Markforged, Nano Dimension is taking bold action in its journey towards becoming a digital
manufacturing leader and being a foundational pillar of Industry 4.0. Markforged is an exceptional company with innovative AM materials
and solutions for true production. Their prowess is validated by their more than fifteen thousand installed and connected systems in the
field with many leading names across key industry verticals. I am excited to work with Shai Terem and his team, who have done an exceptional
job developing their cutting-edge solutions. This is all the more substantial when we think about the anticipated closing of our deal
with Desktop Metal. We believe the combination of Nano Dimension, Desktop Metal, and Markforged further strengthens our unique opportunity
in creating value for our shareholders, customers, and employees as we work to deliver profitable growth, exceptional services, and notable
career development opportunities.”
Shai Terem, Chief Executive Officer, President, and member of the board
of directors of Markfoged, added, “We’re excited to bring together our pioneering, complementary product portfolios that will
further enhance our ability to serve our customers in high-growth industries with a more complete offering of highly innovative solutions
used on the factory floor. Not only is our product offering unique, but together we will have the scale and balance sheet strength to
become an even more trusted partner to our customers, who are leaders across several industries. We look forward to working with Nano
Dimension to join great companies and their devoted teams that can serve our stakeholders to the maximum extent possible.”
Compelling Strategic and Financial Benefits
Expansion of Nano Dimension’s product portfolio to include
fused filament fabrication (“FFF”) for high performance applications - which Nano Dimension believes will create the most
comprehensive set of solutions expected to drive future growth: The transaction will combine the strengths of the respective
company offerings, which Nano Dimension believes will bring customers the most complete set of AM solutions in terms of printing technologies
and materials, especially those that are aligned with the high growth segments of the industry. Customers will find solutions from FFF
to binder jetting to digital light processing to additive inkjet, all across a range of materials, and complemented with sophisticated
software. Altogether, customers will realize the manufacturing solutions they need for unrivalled design-to-manufacturing at scale.
Fosters leadership in Metal-AM – widely considered the greatest
growth driver in the industry: Fundamental tailwinds within the AM industry are expected to result in further growth whereby
metal focused AM is expected to be the clear leader. Nano Dimension secured a promising foothold in Metal-AM with its agreement to acquire
Desktop Metal; that foothold would be widened and deepened with Markforged. Both companies have leading Metal-AM solutions, but in different
printing technologies. By offering more solutions in metal fabrication, customers will find what they need for their specific requirements
whenever they need it.
Builds around strategic focus on sophisticated materials that are
core to high performance applications: Those familiar with the AM industry consistently articulate that a focus on materials is vital
to delivering solutions that make applications for use as end-parts. On this, the combined company exemplifies a materials oriented organization.
Nano Dimension’s existing strength in the materials domain will be brought to new heights with Markforged’s proven know-how
in composite materials, specifically continuous fiber reinforcement. The capabilities in continuous fiber re-enables the strength of metal,
but in polymer based applications, ushering in structural and weight improvements that would open up entire new areas of AM. This translates
to an improved business model whereby wide materials development should translate to increasing recurring revenue.
Enables greater business and organizational scale that is anticipated
to drive greater long-term financial strength: Combining resources across the organizations is anticipated to generate efficiencies
and cost savings opportunities, while enhancing R&D and innovation capabilities. The combination is projected to generate dozens of
millions of dollars in synergies with more to come over the next few years with greater opportunities for scale expected when including
Desktop Metal.
Transaction Highlights
Subject to the terms and conditions of the merger agreement, Nano Dimension
will acquire all of the outstanding shares of Markforged for $5.00 per share in cash.
The combined company is expected to have a strong cash position at
closing, which should be after the Desktop Metal acquisition also closed, with approximately $475 million of projected cash, cash equivalents,
and marketable securities post-transaction.
Completing the transaction is subject to certain closing conditions,
including the approval of Markforged’s stockholders, and required regulatory approvals.
Additional information about the proposed transaction, including a
copy of the merger agreement, will be provided in a Report of Foreign Private Issuer on Form 6-K to be filed by Nano Dimension and
a Current Report on Form 8-K to be filed by Markforged with the U.S. Securities and Exchange Commission (the “SEC”) and available
at www.sec.gov.
Timing and Approvals
The transaction, which was unanimously approved by the Boards of Directors
of both companies, is expected to close in the first quarter of 2025, subject to the satisfaction of customary closing conditions, including
those described above.
Financing
The transaction is not subject to a financing condition. Nano Dimension
intends to finance the transaction using its cash on hand.
Conference Call and Webcast
Management from Nano Dimension and Markforged will be hosting a joint
investor call tomorrow, Thursday, September 26th, 2024 8:30 AM ET.
Listen in and join Q&A via dial-in and/or listen in and view a
presentation via the webcast link per below:
| · | Dial-in toll free: 844-695-5517 |
| · | Dial-in international: 1-412-902-6751 |
| · | Dial-in for Israel toll free: 1-80-9212373 |
| · | Webcast: https://event.choruscall.com/mediaframe/webcast.html?webcastid=ibBkJalW |
Advisors
Greenhill, a Mizuho affiliate, is serving as exclusive financial advisor
to Nano Dimension, and Greenberg Traurig and Sullivan & Worcester LLP are serving as Nano Dimension’s legal counsel. Evercore
is serving as exclusive financial advisor to Markforged, while Goodwin Procter LLP is serving as legal counsel.
About Nano Dimension
Nano Dimension’s (Nasdaq: NNDM) vision is to transform existing
electronics and mechanical manufacturing into Industry 4.0 environmentally friendly & economically efficient precision additive electronics
and manufacturing – by delivering solutions that convert digital designs to electronic or mechanical devices – on demand,
anytime, anywhere.
Nano Dimension’s strategy is driven by the application of
deep learning-based AI to drive improvements in manufacturing capabilities by using self-learning & self-improving systems, along
with the management of a distributed manufacturing network via the cloud.
Nano Dimension has served over 2,000 customers across vertical target
markets such as aerospace and defense, advanced automotive, high-tech industrial, specialty medical technology, R&D, and academia.
The Company designs and makes Additive Electronics and Additive Manufacturing 3D printing machines and consumable materials. Additive
Electronics are manufacturing machines that enable the design and development of High-Performance-Electronic-Devices (Hi-PED®s). Additive
Manufacturing includes manufacturing solutions for production of metal, ceramic, and specialty polymers-based applications - from millimeters
to several centimeters in size with micron precision.
Through the integration of its portfolio of products, Nano Dimension
is offering the advantages of rapid prototyping, high-mix-low-volume production, IP security, minimal environmental footprint, and design-for-manufacturing
capabilities, which is all unleashed with the limitless possibilities of additive manufacturing.
For more information, please visit www.nano-di.com.
About Markforged
Markforged (NYSE: MKFG) is enabling more resilient and flexible
manufacturing by bringing industrial 3D printing right to the factory floor. Our additive manufacturing platform The Digital Forge allows
manufacturers to create strong, accurate parts in both metal and advanced composites. With over 10,000 customers in 70+ countries, we’re
bringing on-demand industrial production to the point of need. We are headquartered in Waltham, Mass where we design the hardware, software
and advanced materials that makes The Digital Forge reliable and easy to use. To learn more, visit www.markforged.com.
Forward-Looking Statements and Other Disclaimers
This press release contains forward-looking statements within the meaning
of the “safe harbor” provisions of the Private Securities Litigation Reform Act of 1995 and other Federal securities laws.
Words such as “expects,” “anticipates,” “intends,” “plans,” “believes,” “seeks,”
“estimates,” and similar expressions or variations of such words are intended to identify forward-looking statements. Specifically
this press release includes statements regarding: (i) the merger consideration and the timing of closing, (ii) complementary product portfolios,
enabling both the companies to better serve their customers in high-growth industries with a more complete offering across different fields,
(iii) the combination of Desktop Metal, Nano Dimension and Markforged creating value for shareholders, customers and employees, (iv) the
ability to drive customer support level and generate long-term growing value for shareholders, (v) Nano Dimension’s ability to focus
on profitability and growth, (vi) Nano Dimension becoming a leader in the AM industry, (vii) the benefits of significantly enhanced scale
and a diversified profile, (viii) the companies creating a stronger company positioned to win in their key markets, (ix) the strategic
and financial benefits and advantages of the transaction, including Nano Dimension’s beliefs regarding the benefits to customers
of the combination, (x) the expected closing of the transaction, (xi) anticipated annual run-rate synergies and cost savings from the
combination and (xii) the strength of the combined company’s balance sheet and expected combined cash at closing. Because such statements
deal with future events and are based on Nano Dimension’s and Markforged’s current expectations, they are subject to various
risks and uncertainties. The acquisition is subject to closing conditions, some of which are beyond the control of Nano Dimension or Markforged.
Actual results, performance, or achievements of Nano Dimension or Markforged could differ materially from those described in or implied
by the statements in this press release. The forward-looking statements contained or implied in this press release are subject to other
risks and uncertainties, including (i) the ultimate outcome of the proposed transaction between Nano Dimension and Markforged, including
the possibility that Markforged’s stockholders will reject the proposed transaction, (ii) the ultimate outcome of the proposed transaction
between Nano Dimension and Desktop Metal, including the possibility that Desktop Metal’s stockholders will reject the proposed transaction,
(iii) the effect of the announcement of the proposed transaction on the ability of Nano Dimension and Markforged to operate their businesses
and retain and hire key personnel and to maintain favorable business relationships, (iv) the timing of the proposed transaction, (v) the
occurrence of any event, change or other circumstance that could give rise to the termination of the proposed transaction, (vi) the ability
to satisfy closing conditions to the completion of the proposed transaction (including any necessary shareholder approvals), (vii) other
risks related to the completion of the proposed transaction and actions related thereto, and (viii) the risks and uncertainties discussed
under the heading “Risk Factors” in Nano Dimension’s annual report on Form 20-F filed with the SEC on March 21, 2024,
and in any subsequent filings with the SEC, and under the heading “Risk Factors” in Markforged’s annual report on Form
10-K filed with the SEC on March 15, 2024, and in any subsequent filings with the SEC. The combined company financial information included
in this press release has not been audited or reviewed by Nano Dimension’s auditors and such information is provided for illustrative
purposes only. You should note that such combined company information has not been prepared in accordance with and does not purport to
comply with Article 11 of Regulation S-X under the U.S. Securities Act of 1933, as amended (the “Securities Act’). Except
as otherwise required by law, each of Nano Dimension and Markforged undertakes no obligation to publicly release any revisions to these
forward-looking statements to reflect events or circumstances after the date hereof or to reflect the occurrence of unanticipated events.
References and links to websites have been provided as a convenience, and the information contained on such websites is not incorporated
by reference into this press release. Nano Dimension and Markforged are not responsible for the contents of third-party websites.
No Offer or Solicitation
This communication is not intended to and shall not constitute an offer
to buy or sell or the solicitation of an offer to buy or sell any securities, or a solicitation of any vote or approval, nor shall there
be any sale of securities in any jurisdiction in which such offer, solicitation or sale would be unlawful prior to registration or qualification
under the securities laws of any such jurisdiction. No offering of securities shall be made, except by means of a prospectus meeting the
requirements of Section 10 of the Securities Act.
Additional Information about the Transaction and Where to Find It
In connection with the proposed transaction, Markforged intends to
file a proxy statement with the SEC. Markforged may also file other relevant documents with the SEC regarding the proposed transaction.
This document is not a substitute for the proxy statement or any other document that Markforged may file with the SEC. The definitive
proxy statement (if and when available) will be mailed to shareholders of Markforged. INVESTORS AND SECURITY HOLDERS ARE URGED TO READ
THE PROXY STATEMENT AND ANY OTHER RELEVANT DOCUMENTS THAT MAY BE FILED WITH THE SEC, AS WELL AS ANY AMENDMENTS OR SUPPLEMENTS TO THESE
DOCUMENTS, CAREFULLY AND IN THEIR ENTIRETY IF AND WHEN THEY BECOME AVAILABLE BECAUSE THEY CONTAIN OR WILL CONTAIN IMPORTANT INFORMATION
ABOUT THE PROPOSED TRANSACTION. Investors and security holders will be able to obtain free copies of the proxy statement (if and when
available) and other documents containing important information about Markforged and the proposed transaction, once such documents are
filed with the SEC through the website maintained by the SEC at http://www.sec.gov. Copies of the documents filed with the SEC by the
Company will be available free of charge on Markforged’s website at https://investors.markforged.com/sec-filings.
Participants in the Solicitation
Nano Dimension, Markforged and certain of their respective directors
and executive officers may be deemed to be participants in the solicitation of proxies from Markforged shareholders in respect of the
proposed transaction. Information about the directors and executive officers of Nano Dimension, including a description of their direct
or indirect interests, by security holdings or otherwise, is set forth in Nano Dimension’s Annual Report on Form 20-F for the fiscal
year ended December 31, 2023, which was filed with the SEC on March 21, 2024. Information about the directors and executive officers of
Markforged, including a description of their direct or indirect interests, by security holdings or otherwise, is set forth in Markforged’s
proxy statement for its 2024 Annual Meeting of Stockholders, which was filed with the SEC on April 26, 2024 and Markforged’s Annual
Report on Form 10-K for the fiscal year ended December 31, 2023, which was filed with the SEC on March 15, 2024. Other information regarding
the participants in the proxy solicitation and a description of their direct and indirect interests, by security holdings or otherwise,
will be contained in the proxy statement and other relevant materials to be filed with the SEC regarding the proposed transaction when
such materials become available. Investors should read the proxy statement carefully when it becomes available before making any voting
or investment decisions. You may obtain free copies of these documents from Nano Dimension or Markforged using the sources indicated above.
Nano Dimension Contacts
Investor:
Julien Lederman, VP Corporate Development
ir@nano-di.com
Media:
Kal Goldberg / Hannah Dunning | NanoDimension@fgsglobal.com
Markforged Contacts
Media
Sam Manning, Public Relations Manager
sam.manning@markforged.com
Investors
Austin Bohlig, Director of Investor Relations
investors@markforged.com
4
Nano Dimension (NASDAQ:NNDM)
Historical Stock Chart
From Oct 2024 to Nov 2024
Nano Dimension (NASDAQ:NNDM)
Historical Stock Chart
From Nov 2023 to Nov 2024
