Forsys Reports Positive Exploration Drilling Results and Confirms Higher Recoveries from Metallurgical Testwork
19 March 2013 - 10:00PM
Marketwired Canada
Forsys Metals Corp ("Forsys" or the "Company")
(TSX:FSY)(FRANKFURT:F2T)(NAMIBIAN:FSY) today announced further positive drilling
results at the Norasa Uranium Project ("Norasa") from an extension exploration
program on the Company's fully permitted Valencia Mining Licence 149 ("ML 149")
in Namibia, Africa. The drilling program was completed on the Company's recently
discovered deposit, "Valencia East" which is located 500 metres northeast from
the planned Valencia production pit (see Figure 1). Initial drilling activities
commenced on 20 November 2012 and 15 percussion holes completed before year-end.
This release reports on an additional 30 percussion drill holes completed in Q1
2013. The total metres drilled in this phase were 3,185 meters and a total of
5,436 metres have been drilled since the drilling program commenced.
The Company is also pleased to announce the latest results of a metallurgical
test program that began during the latter part of 2012. The previous Snowden
Technical Report released in January 2010 reported processing recoveries of
85.7%. The current results from SGS Lakefield in Johannesburg indicate Forsys
will be able to achieve an overall plant recovery exceeding 88%.
Marcel Hilmer, Chief Executive Officer, commented, "The continuing positive
drilling results from Valencia East are very encouraging and further indicate
the potential for a significant high-grade area located in close proximity to
the main Valencia deposit and proposed processing plant. We are very pleased
that this program continues to increase both the potential resources and the
overall grade of Norasa. We are further encouraged by the SGS report which
indicates an increased processing recovery of greater than 2% over those in the
Company's previous Technical Report."
Valencia East - Highlighted Drilling Results
Table 1: Highlights of recent assay results from Valencia East Percussion
Drilling
(significant intersections with minimum interval of 1.0 metre)
-----------------------------------------------------------------------
Grade (ppm
Hole From (m) To (m) Interval (m) U3O8)
-----------------------------------------------------------------------
VEPD-016 58.5 63.6 5.1 204
Including 60.0 61.6 1.6 280
-----------------------------------------------------------------------
VEPD-017 72.0 73.8 1.8 223
-----------------------------------------------------------------------
VEPD-018 118.4 138.2 19.8 169
Including 120.8 123.0 2.2 209
Including 130.1 132.6 2.5 231
Including 137.0 138.1 1.1 506
-----------------------------------------------------------------------
VEPD-020 13.3 14.9 1.6 248
Including 13.4 14.4 1.0 305
-----------------------------------------------------------------------
VEPD-021 20.2 23.6 3.4 186
Including 21.8 22.8 1.0 215
-----------------------------------------------------------------------
VEPD-022 28.8 30.4 1.6 218
-----------------------------------------------------------------------
VEPD-025 18.8 21.4 2.6 203
74.8 76.0 1.2 312
129.3 132.2 2.9 204
Including 130.1 131.5 1.4 238
133.8 135.7 1.9 194
Including 133.8 134.9 1.1 260
-----------------------------------------------------------------------
VEPD-026 82.4 83.4 1.0 319
-----------------------------------------------------------------------
VEPD-027 68.4 69.5 1.1 195
77.6 81.5 3.9 188
100.4 119.8 19.4 240
-----------------------------------------------------------------------
VEPD-028 55.4 56.4 1.0 215
120.0 129.5 9.5 245
Including 120.0 121.1 1.1 384
Including 121.8 123.0 1.2 330
Including 127.2 129.5 2.3 266
-----------------------------------------------------------------------
VEPD-029 86.4 87.4 1.0 204
90.0 92.2 2.2 192
Including 91.0 92.0 1.0 257
-----------------------------------------------------------------------
VEPD-030 72.9 75.6 2.7 364
Including 73.5 75.3 1.8 484
96.8 98.0 1.2 205
-----------------------------------------------------------------------
VEPD-031 42.3 49.3 7.0 237
Including 43.7 47.9 4.2 289
66.0 68.3 2.3 241
Including 66.4 67.4 1.0 348
-----------------------------------------------------------------------
VEPD-035 50.7 51.9 1.2 199
68.3 74.4 6.1 777
Including 68.6 72.0 3.4 1244
-----------------------------------------------------------------------
VEPD-036 17.7 18.7 1.0 210
86.8 89.3 2.5 347
Including 87.3 88.3 1.0 589
122.7 125.5 2.8 252
Including 124.2 125.2 1.0 399
-----------------------------------------------------------------------
VEPD-037 39.7 40.9 1.2 213
44.0 63.3 19.3 244
Including 44.1 45.1 1.0 351
Including 46.9 49.6 2.7 326
Including 54.0 55.4 1.4 302
Including 56.3 58.0 1.7 282
Including 58.9 60.9 2.0 382
94.3 95.8 1.5 242
-----------------------------------------------------------------------
VEPD-038 39.7 40.9 1.2 216
53.9 55.8 1.9 220
-----------------------------------------------------------------------
VEPD-039 16.3 18.1 1.8 266
32.2 33.3 1.1 331
34.3 36.2 1.9 222
44.5 46.0 1.5 226
-----------------------------------------------------------------------
Valencia East is located within the existing fully permitted Valencia Mining
Licence, ML 149.
To view FIGURE 1, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig1.pdf.
Geology
The geology in Valencia East is very similar to that of the Valencia Main
deposit with uranium mineralization associated to post D3 deformation anatectic
alaskite intruding as stock-like bodies (sills) into the SE limb of an
antiformal structure of Nosib and Swakop Group metasediments (see Figure 2 and
3).
The overall structure is NE/SW trending with strata dipping towards the SE.
The alaskite intruded sub-parallel to the steep metasediments and crosscuts in a
structural weakness zones and increasing in volume over very short distances. It
is in this position where higher mineralization has been encountered.
The wider area is characterized by typical interference of F3/F4 events partly
resulting in "Z-shaped king folds" such as in the Valencia Main area. Overall
orientation is following the main Damaran strike (NE). Fold and bedding planes
are following this direction and strata boundaries are principally dipping
towards the SE.
The mineralized intrusion pulse at Valencia East is interpreted to be of post
Damaran age.
To view FIGURE 2a, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig2.pdf.
To view FIGURE 2b, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig2b.pdf.
Valencia East is a structural extention of Valencia Main forming a more regular
succession of metasediments with remnants of D-type alaskite occuring in form of
boudinaged sills and dykes. The alaskite emplacement is in general conformable
but in the center of Valencia East thickening and partly transgressive. Fig 3
displays, from left to right (West to East) alaskite shoots intruding
subparallel to Khan, Rossing and Chuos Formation.
To view FIGURE 3, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig3.pdf.
Mineralisation
The alaskite is moderately to highly radioactive on surface (see Figure 4) and
proven to continue to depth beyond current drill cover. The granite is
characterized by a coarse grain texture and the occurrence of frequent smoky
quartz clusters.
To view FIGURE 4, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig4.pdf.
Future Drilling Programs
Following on from the current phase of drilling at Valencia East, drilling
activities will move to the Valencia North deposit to begin delineating that ore
body. This exploration program will initially target 3,000 metres and is
designed to establish the outline of another prospective deposit and to enable
planning for further sampling and analytical work.
Initial drill sites have already been laid out at Valencia North and drill
access (tracks and platforms) has being established.
VALENCIA METALLURGICAL TESTWORK
Forsys is pleased to announce the latest results of a metallurgical test program
that began during the latter part of 2012. The objective of these tests was to
get a better understanding of the acid leach behaviour.
Previous process plant design and study work relied on several phases of leach
test work that had been conducted over a number of years. Various test
conditions had been used over this period with varying results. Previous study
work assumed a constant leach recovery of uranium (acid dissolution) in the
process models. There was however some evidence that there was a consistency in
the residue value of the tailings; i.e. leach recovery was a function of the
grade of the samples. As a result, a decision was made to embark on a much more
extensive leach test program than had been conducted in the past to determine:
-- the leach recovery under a standard set of conditions (previously
identified as the Valencia optimum leach conditions), and
-- confirm that there is a constant leach residue or at least that the
recovery is a function of the head grade.
Samples were taken from drill core representing a uniform spacial and grade
distribution of mineralized zones of at least 5m wide. A total of 48 samples
were chosen; 11 from the Measured Resource category, and the rest from the
Indicated category. Samples came from different boreholes across the Valencia
main deposit.
All samples were sent to SGS Lakefield in Johannesburg for the test work. Each
sample was leached for a period of 24 hours with samples taken at 4, 8, 12 and
24 hours. Tests were conducted at standard conditions of 80% passing 850 micron
grind, 25C and pH of 1.8. The recoveries, as a function of grade, are
illustrated below. Although the variation in results is noted, there appears to
be a general trend of increasing grade with recovery.
To view FIGURE 5, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig5.pdf.
To view FIGURE 6, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig6.pdf.
The average recovery with time for all 48 samples is summarized below, compared
with the 87% average acid dissolution recovery used in previous studies. It is
the Company's opinion that in spite of the variation in results, the trend of
recovery being a function of grade cannot be ignored and expect an acid
dissolution of at least 90% with an overall plant recovery exceeding 88%. This
compares favorably to the overall plant recovery of 85.7% reported in the
Snowden Technical Report of January 2010. The Company anticipates acid
consumption was also shown to be 16% less that previously assumed, now at 16.2
kg/t H2SO4.
To view FIGURE 7, please visit the following link:
http://media3.marketwire.com/docs/fsy-fig7.pdf.
NORASA - CONSOLIDATED NAMIBIAN PROJECTS
Norasa is the name for Forsys' consolidated neighboring uranium properties;
Valencia (Mining Licence 149) and Namibplaas (Exclusive Prospecting Licence
3638). Forsys is in the process of updating the previous Snowden Technical
Report from January 2010 for Norasa Uranium, including the various satellite
deposits currently being explored.
NI 43-101 and Qualified Persons
Mr. Martin Hirsch, M.Sc in Geology and a member of the British IMMM, Chief
Geologist for Forsys Metals Corp., is the designated Qualified Person
responsible for the Company's exploration programs. He is familiar with the
methods for Quality Assurance and Quality Control specifically applicable to
uranium. Mr Hirsch has sufficient experience that is relevant to the style and
mineralization, type of deposit and the use of radiometrics in resource
estimates as well as to the activity he is undertaking to qualify as a Qualified
Person under NI 43-101.
About Forsys Metals Corp
Forsys Metals Corp is an emerging uranium producer with 100% ownership of the
fully permitted Valencia uranium project and the Namibplaas uranium project in
Namibia, Africa a politically stable and mining friendly jurisdiction.
Information regarding current National Instrument 43-101 compliant Resource and
Reserves at Valencia and Namibplaas are available on our website.
On behalf of the Board of Directors of Forsys Metals Corp
Marcel Hilmer, Chief Executive Officer
Sedar Profile #00008536
Forward-Looking Information
This news release contains projections and forward-looking information that
involve various risks and uncertainties regarding future events. Such
forward-looking information can include without limitation statements based on
current expectations involving a number of risks and uncertainties and are not
guarantees of future performance of the Company. The following are important
factors that could cause Forsys actual results to differ materially from those
expressed or implied by such forward looking statements: fluctuations in uranium
prices and currency exchange rates; uncertainties relating to interpretation of
drill results and the geology; continuity and grade of mineral deposits;
uncertainty of estimates of capital and operating costs; recovery rates,
production estimates and estimated economic return; general market conditions;
the uncertainty of future profitability; and the uncertainty of access to
additional capital. Full description of these risks can be found in Forsys
Annual Information Form, dated March 15, 2013, available on the Company's
profile on the SEDAR website at www.sedar.com. These risks and uncertainties
could cause actual results and the Company's plans and objectives to differ
materially from those expressed in the forward-looking information. Actual
results and future events could differ materially from anticipated in such
information. These and all subsequent written and oral forward looking
information are based on estimates and opinions of management on the dates they
are made and expressed qualified in their entirety by this notice. The Company
assumes no obligation to update forward-looking information should circumstances
or management's estimates or opinions change.
Shares Outstanding: 109,875,422
FOR FURTHER INFORMATION PLEASE CONTACT:
Forsys Metals Corp
Marcel Hilmer
Chief Executive Officer
+61 417 177 942
mhilmer@forsysmetals.com
www.forsysmetals.com
TMX Equicom
Joe Racanelli
+1 416-815-0700 Ext 243
JRacanelli@equicomgroup.com
Forsys Metals (TSX:FSY)
Historical Stock Chart
From Apr 2024 to May 2024
Forsys Metals (TSX:FSY)
Historical Stock Chart
From May 2023 to May 2024
