Tinkerine Studios Ltd (PK) (TKSTF) Share Price

Tinkerine enters Collaboration Agreement with Techies of Tomorrow

GlobeNewswire

May 30, 2024 1:22 PM EDT

Delta, BC, May 30, 2024 (GLOBE NEWSWIRE) -- Tinkerine Studios Ltd. (TSXV: TTD) ("Tinkerine" or the "Company") announces a recent partnership through a Collaboration Agreement with Techies of Tomorrow (“TOT”), a leading technology talent incubator based in British Columbia. Under this agreement, Tinkerine will expand its portfolio of Education Technology (“Edtech”) products and services to include platform development, artificial intelligence, and 3D printing solutions. The joint efforts between Tinkerine and TOT are currently concentrated on various projects spanning the 3D printing, dental, housing, agriculture, and the medical sectors.

About Techies of Tomorrow

Techies of Tomorrow is a tech talent incubator that empowers?recent BC tech?graduates to work on real industry projects that require high quality and cost-effective solutions. By focusing on industry mentorship and continuous training, Techies of Tomorrow aims to fulfill the talent demands in the tech industry. By taking on real industry work, grads put their education and skillsets into practice, build their portfolio, and create meaningful industry connections.

Following the successful launch of a pilot project in 2020, Techies of Tomorrow was born to continue implementing its vision and mission to educate, train, and create opportunities for BC’s local tech talent, while providing technology solutions for BC businesses.

Founded by Henry Leung and Ramin Shadmehr, TOT is committed to cultivating a vibrant ecosystem where local tech talent can thrive while addressing the needs of businesses across British Columbia. Henry, who serves as the Program Head for Digital Design and Development at the British Columbia Institute of Technology, specializes in crafting sophisticated cross-platform applications. Ramin, the Dean of Fine and Applied Arts at Capilano University, brings expertise in cross-platform application design and development, including proficiency in creating tools within Maya and Unreal Engine.

Expanding upon Tinkerine's broad array of educational alliances forged through its offerings in 3D printing sales and services, this collaboration endeavors to establish a strong foundation for the progression of emerging technologies within educational contexts. These technologies encompass 3D printing, artificial intelligence, platform design, and sustainability, aiming to enrich learning experiences and prepare students for the demands of a rapidly evolving digital landscape.

Tinkerine also announces Mr. Dean Stuart has been engaged by the Company to provide investor relations and business development services. He brings with him extensive experience in providing consulting services to TSX Venture companies since 1999. Initially engaged by the Company in February 2016, Mr. Stuart is based in Calgary, Alberta. He holds 250,000 stock options in the Company, with 200,000 issued on March 26, 2020, and 50,000 issued on October 19, 2021. Other than these 250,000 stock options, Mr. Stuart currently holds no direct or indirect interest in the company. As an arm’s length contractor to Tinkerine, Mr. Stuart's compensation for these services is set at $750 per month. The agreement is structured to renew annually, with renewal terms agreed upon mutually, starting from February 16.

About Tinkerine

At Tinkerine, we transform ideas into exceptional user experiences, crafting a future where digital interactions are delightful and purposeful. We empower the curious to convert creative ideas into the tangible and the unimaginable. By championing human-centric design, we inspire connections, foster loyalty, and drive meaningful impact, enriching lives through authentic, harmonious technology interactions. All Tinkerine products and services are designed and developed in Canada.

For further information please contact:

Dean Stuart
T: 403 617 7609
E: dean@boardmarker.net

Eugene Suyu
Co-Founder, Director

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

TKSTF: inactive security. FINRA deleted symbol:

https://otce.finra.org/otce/dailyList?viewType=Deletions

PR distribution doesn’t appear to be happening in the U.S. Look at the 2/11 PR about the $2M private placement on the company’s website, it has this at the top below the headline:

NOT FOR DISTRIBUTION TO UNITED STATES NEWSWIRE SERVICES OR FOR DISSEMINATION IN THE UNITED STATES

I’ve been keeping my eye on this for a while as 3D printing stocks were hot, but this one never seems to find its way. IMHO

Go to the company’s website and you can read the newer stuff.

Tinkerine signs MOU with Ocean Legacy Foundation for the development of Ocean Plastic Waste 3D Printing Solutions

March 9, 2021 - TinkerineTM Studios Ltd. (TSXV: TTD) ("Tinkerine" or the "Company") announces it has entered into an Memorandum of Understanding (“MOU”) with the Ocean Legacy Foundation (“OLF”) for the establishment of a working partnership to permit the creation and interchange of information, including scientific, technical and financial collaboration in the area of the use of OLF recycled plastics material in 3D applications and the development of a larger format systems that would utilize OLF plastic materials for larger type structures and products.

The Ocean Legacy Foundation (“OLF”) is a Canadian based non-profit organization, founded in 2014 with the goal to end ocean plastic pollution. OLF is an internationally recognized organization that has developed a world leading Plastic Pollution Emergency Response program called EPIC. This dynamic approach integrates Education, Policy, Infrastructure development and Cleanup. Our goal is to give wasted plastic resources an economic value to stimulate the plastic circular economy and provide communities with the long-term tools they need to steward their environment while keeping plastic out of the oceans.

The objective of this Agreement defines how Tinkerine and the Ocean Legacy Foundation wish to combine their respective skills, expertise, experience and resources to;

1) Determine the economic viability for the design, manufacturing, marketing, and distribution of the products developed for 3D applications using recycled plastic materials provided by OLF;

2) Collaborate in the exploration and development of a large format system that will utilize OLF recycled plastic pellet material in a 3D manufacturing application.
Under this Agreement, TTD shall:
a. Utilize in-house knowledge of Agile Applied Design processes, and 3D printing expertise for the formulation of OLF plastic material in 3D applications.
b. Leverage existing design, 3D intellectual property and team capabilities to fabricate prototypes of said products.
c. Work with OLF to build and design systems that will utilize the proprietary TTD software and management systems in large format systems to turn plastic waste into economically viable products.
OLF shall:
a. Identify and provide the different types of recycled plastic materials and assist in the research of material development.
b. Collaborate with TTD to provide design, engineering and operational assistance including building, testing and validation for the 3D application.
c. Assist in providing material specifications and characteristics on a coordinated global basis for integration into 3D applications.

“Ocean Legacy is thrilled to be partnering with TinkerineTM to continue developing pragmatic solutions which can utilize wasted plastic resources collected from ocean and shoreline environments into durable long-lived products,” expresses Chloé Dubois, President of the Ocean Legacy Foundation, “3-D printing and the experience of the Tinkerine team provides a unique opportunity which can bring value to much of the marine related plastics entering our natural and landfill environments to further support the development of the plastic circular economy.”
“We’re excited to be working with the Ocean Legacy Foundation team on the exploration and development of recycled oceans plastic materials in 3D applications,” states Eugene Suyu Tinkerine’s CEO, “With the combination of design-centric processes, our 3D printing expertise, together with Ocean Legacy Foundation’s strong focus and understanding of recycled ocean materials, I believe we can create value for communities and businesses around the world.”

About Tinkerine
Our mission is to provide a foundational understanding about Applied Design driven by 3D printing. Our ecosystem of 3D printing products and educational resources equips future generations with the innovative tools and products to stay ahead in a fast-paced, tech-driven world. Tinkerine enables the curious to convert creative ideas into the tangible and the unimaginable. All Tinkerine 3D printers and education services are designed and manufactured in Canada.

For further information please contact:
Dean Stuart
T: 403 617 7609
E: dean@boardmarker.net
Eugene Suyu
Chief Executive Officer

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.
This news release contains certain forward-looking statements, including, but not limited to, expectations as to the acceptance of products designed and created by the Tinkerine Applied Design staff and the Company’s future plans and intentions. Wherever possible, words such as “may”, “will”, “should”, “could”, “expect”, “plan”, “intend”, “anticipate”, “believe”, “estimate”, “predict” or “potential” or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management’s current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties and assumptions. Many factors could cause actual results, performance or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, the Company cannot assure readers that actual results will be consistent with these forward-looking statements. The Company assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.


Link: https://nodebb-test.s3-us-west-1.amazonaws.com/static/news-release/Tinkerine+signs+MOU+with+Ocean+Legacy+Foundation+for+the+development+of+Ocean+Plastic+Waste+3D+Printing+Solutions.pdf

Why is everything old news? WHAT is going on here?

what's going on here?

https://tinkerine.com

Health Canada certificate approval news! $TTD $TTD.v $TKSTF HALTED: News- Health Canada certificate approval! https://t.co/SxCAvTnO8N pic.twitter.com/9imoZ1x5jp— Cluster Trader (@HandsTiedBull) April 6, 2020

Solid company, great structure and the right type of merchandise during this urgency.

Looking good! $TKSTF

Tinkerine Studios completes Ventilator Splitter V1 and Education Production Consortium Update
(via TheNewswire)

https://www.otcmarkets.com/stock/TKSTF/news/story?e&id=1567342

April 2, 2020 -TheNewswire -Tinkerine(TM) Studios Ltd. (TSXV:TTD)("Tinkerine" or the "Company") announces the completion of Tinkerine Ventilator Splitter V1 for potential use by medical personnel requiring additional capacity for existing ventilators in extreme emergency situations. Splitter V1 has been designed by Tinkerine staff incorporating Applied Design with input from medical professionals including respiratory therapists in the Greater Vancouver region. Splitter V1 is being presented for feedback and Tinkerine expects to continue agiledesign thinking to provide a deployable splitter should the COVID-19 situation worsen.

Tinkerine Ventilator Splitter Applied Design Image utilizing Tinkerine Slicing Software

Click Image To View Full Size

Tinkerine Ventilator Splitter Version 1 3D Printed Prototype

Click Image To View Full Size

Education Production Consortium ("EPC") Status

Effective April 1, 2020, more than 100 Tinkerine Ditto-Pro, DittoPro-R, and other 3D printers have joined the EPC. Several education institutions and professionals have joined the EPC to assist in the scale up effort of Tinkerine's Face Shield production capabilities.

Additional schools and education professionals are encouraged to visit our website to join the EPC.

https://tinkerine.com/ppe

Additional 3D printers contributing to the EPC will further increase production capacity. The potential increased production capacity is currently being finalized with initial focus on the Tinkerine Face Shield, and future focus on other emergency medical products under design. Other medical products being considered for design include goggles, testing swabs, and other supplies that may become limited in supply.

About Tinkerine

Our mission is to provide a foundational understanding about Applied Design driven by 3D printing. Our ecosystem of 3D printing products and educational resources equips future generations with the innovative tools and products to stay ahead in a fast-paced, tech-driven world. Tinkerine enables the curious to convert creative ideas into the tangible and the unimaginable. All Tinkerine 3D printers and education services are designed and manufactured in Canada.

For further information please contact:

Dean Stuart

T: 403 617 7609

E:dean@boardmarker.net

Eugene Suyu

Chief Executive Officer

Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

This news release contains certain forward-looking statements, including, but not limited to, expectations as to the acceptance of products designed and created by the Tinkerine Applied Design staff and the Company's future plans and intentions. Wherever possible, words such as "may", "will", "should", "could", "expect", "plan", "intend", "anticipate", "believe", "estimate", "predict" or "potential" or the negative or other variations of these words, or similar words or phrases, have been used to identify these forward-looking statements. These statements reflect management's current beliefs and are based on information currently available to management as at the date hereof.

Forward-looking statements involve significant risk, uncertainties and assumptions. Many factors could cause actual results, performance or achievements to differ materially from the results discussed or implied in the forward-looking statements. These factors should be considered carefully and readers should not place undue reliance on the forward-looking statements. Although the forward-looking statements contained in this news release are based upon what management believes to be reasonable assumptions, the Company cannot assure readers that actual results will be consistent with these forward-looking statements. The Company assumes no obligation to update or revise them to reflect new events or circumstances, except as required by law.

Copyright (c) 2020 TheNewswire - All rights reserved.

© Copyright (c) 2020 TheNewswire - All rights reserved.

Tinkerine Studios provides 3D Printing Services for Medical Devices in short supply due to COVID-19 Pandemic
(via TheNewswire)



March 20, 2020 -TheNewswire -Tinkerine(TM) Studios Ltd. (TSXV:TTD)("Tinkerine" or the "Company") announces the launch of 3D printing services to the medical community to produce medical products currently in short supply due to the COVID-19 pandemic. Tinkerine maintains an inventory of DittoPro-R and DittoPro 3D printers that can be utilized to print products including face shields, ventilator valves, and breathing filters. Tinkerine is prepared and ready to provide required solutions for the medical community and sector in the weeks and months ahead. Tinkerine currently is designing a face shield that can be deployed to our nations front line workers.

Tinkerine is also offering up Applied Design services for additional medical devices potentially in short supply. In order to expedite design and manufacturing, Tinkerine requests the following information in order to begin production.

1.Email image (top / front / right) or .stl file to Tinkerine atcontact@tinkerine.com;
2.Provide any design or autocad files defining the product (if possible);
3.Provide quantity of product required;
4.Detailed contact information for Applied Design discussion and delivery.
Tinkerine also has 3D printers available for purchase by regional health authorities and government agencies.

About Tinkerine

Our mission is to provide a foundational understanding about Applied Design driven by 3D printing. Our ecosystem of 3D printing products and educational resources equips future generations with the innovative tools and products to stay ahead in a fast-paced, tech-driven world. Tinkerine enables the curious to convert creative ideas into the tangible and the unimaginable. All Tinkerine 3D printers and education services are designed and manufactured in Canada.

For further information please contact:

Dean Stuart

T: 403 617 7609

E:dean@boardmarker.net

Eugene Suyu

Chief Executive Officer

Wonder when the stock will start trading again!

Thanks for the update Flamingo. Keeping my fingers crossed!

Tinkerine acquired a crypto currency company financed privately and through an issue of 52 mill common shares and warrants.

https://www.stockwatch.com/News/Item.aspx?bid=Z-C%3aTTD-2739978&symbol=TTD®ion=C

Trading was halted late yesterday and througjout the day to day. All in all, positive news for the continued growth of the company. Would like to see trading resume.

No bid, no ask? News?

I could use some good news regarding this company!

Announcement coming tomorrow. Potentially big news. I have spoken to the company's contact of investor relations and have confirmed it will be good news.

I like the fact that this is a real company and has found its bottom. Great support around the .03 and .04 levels. Makes sense at investors are not going to let a legit company bottom out below $1M market cap. It's still floating below $2M market cap, which this company would easily fetch in a sale. Makes you wonder how much longer until it jumps up!

Got pummeled also. Like the people who run the company, they are starting to make money, have a product and a plan, hoping for the best!

Got pummeled also. Like the people who run the company, they are starting to make money, have a product and a plan, hoping for the best!

I am still holding a small position got pummeled on. Let is see what they can do. Ridiculous this has crashed like it has considering they are an actual company with an actual product.

I believe we are moving in the right direction! Need need to be patient.

TKSTF 2016 financial results:

https://tinkerine.com/wp-content/uploads/2016/01/ttd05012017final.pdf

Financial Summary
2016 YE 2015 YE
Revenue $847,188 $1,268,074
Gross Profit $370,669 $595,230
Expenses $1,180,557 $1,766,991
Net Loss ($833,133) ($1,069,447)

Thanks simonfisc, good article re Tinkerine!

3D Printing – Disillusionment seems to drag on, is there light at the end of the tunnel?

Why I invested in this company. 1. Declining expenses to near normal expenses.
2. Increasing revenues qOq and yOy which will translate to profits and positive cashflow.
3. Possible future buyout from bigger competitors or others when business takes off.
4. Expanding market opportunity in the 3D space.
5. Great leadership team.

Agreed 110%. When year end #'s coming out (last year it was Jan 12) I think the run will start. I think the delay can be attributed to moving offices in late December (FYI, to a bigger and cheaper office) and also to the fact that they did a lot more volume than they thought. Bottom line, bigger better office, hiring employees means growth for a 2nd consecutive quarter.

The fundamental facts Looking very good . Its quite unusual that a Company in this promising sector making Profit ! and is traded with a market Cap of 3 or 4 m Dollar . Take a Look @ Sigma labs . The Last days this Stock , comparable with tkstf , is flying . I exspect a Major run to come next days .

Have been in this for almost 2 years and following this message board for about the same time.I'm in Canada and own a ton of cdn shares as well. I've even spoken to their investor relations guy on a regular basis. Not sure if anyone follows them on facebook or twitter but they have a job posting for a Sales Rep. To me thats a sure sign of growth and financial stability. Been anticipating year end numbers. I think they are gonna be good and the price will take off. What a day for Sigma Labs btw. Wish I was in that!

Youre still invested ?? Just buying here .... Chart Looks like Huge Move to come now

Charts , figures and low market Cap Looks like this Thing will fly next Weeks .

Watching Sigma labs und tinkerine Studios . Sigma labs Just exploding will this one Follow ??

Good volume and news today! Feeling optimistic !

Sorry,
Can't help u with that one.

People will begin to learn about this stock though and,
it is growing as we can see.

Hoping Watchdog! Where is my man 3dyogi, he is long on this stock too'

It seems like our time has started!
$ on the way! Great earnings like this will get attention.
.07 is exstremely cheap and bottom floor for a growing company.

Been in this several years. Hoping for the best. Remember thinking anything under .50 was a buy!

Volume coming in this morning. This company is executing on all fronts. It reminds me more of small cap Nasdaq stock than OTC.
With such a small float. And Great team running this company this stock is going to move to the upside.

News out this morning
VANCOUVER, British Columbia, Sept. 15, 2016 (GLOBE NEWSWIRE) -- Tinkerine Studios Ltd. (Tinkerine or the Company) (TSX-V:TTD) (FSE:WB6B) and (OTC:TKSTF) is pleased to announce the launch of two (2) new additions to Tinkerines filament line. The two products, Ht Filament and Limited Series Filament Initiative will bring more choices to customers and greatly complements the Companys existing product line. Ht Filament is our specially formulated high temperature resistant filament that can handle up to 90 degrees Celsius in air. With Ht, we change the way we look at the need for ABS while maintaining the ease of use, safety, reliability of PLA, and the strength of what we want from ABS, says Eugene Suyu, President and CEO of Tinkerine. Limited Series Filament Initiative takes a new approach on how we get to understand what our customers are looking for. The color choices are not selected by Tinkerine, but instead driven by those that are leading the industry forward and produced in a limited production run. With the introduction of the two new additions of our filament line of products, we look to change the way the industry looks at filament. The depth of how we get to understand our customers will ultimately be how we bring value to the shareholders as well as our customers, added Suyu. The filament can now be purchased on the Tinkerine Website at www.tinkerine.com. ABOUT TINKERINE STUDIOS LTD. Tinkerine Studios designs and manufactures user-friendly award winning 3D printers and software, with a focus on STEAM based educational content and online training tools. Tinkerine also manufactures its own line of high purity filament for 3D printers. Tinkerine and Ditto are registered trademarks of Tinkerine Studios Ltd., all rights reserved. Neither the TSX Venture Exchange nor its Regulation Services Provider (as that term is defined in the policies of the TSX Venture Exchange) accepts responsibility for the adequacy or accuracy of this release.

Hope you're right!

Volume coming in this morning. This is a very small float for a OTC it could surge and skyrocket anytime.
We are do for significant news.

Anytime!
Long TKSTF.

Thanks Yogi

Todd Blatt, B.Sc.
VP of Market Direction

Todd was an integral part of the MakerBot marketing team that successfully launched their physical NY store. Todd was selected as one of the 100 most influential l individuals for 2013 in the 3D printing industry.





MakerBot Sells to Stratasys for $403M -- Plus $201M for Earn-Outs ...

Jun 19, 2013 - MakerBot Sells to Stratasys for $403M — Plus $201M for Earn-Outs ... But it has sold more than 22,000 3-D printers since it was founded in ...

TKSTF 2 Million Market Cap 40 Million float this thing is going to a dollar. People who see the angles playing out. Are Patient will be rewarded handsomely. TKSTF has superior Printer To Maker Bot. Cheaper and more Aesthetically pleasing than maker Bot. This STEAM program will launch TKSTF into a dollar land great team lead by a tip top CEO.

This guy is key to taking the company to the next level. HP Connection He also costarted a company with 1.2
Billion market cap.

Ben Yan, B.Sc., MBA
Head of Channels Development

Currently the CEO of GoHotZone.com, Ben Yan has more than 35 years of extensive management experience with Fortune 50 companies, including Hewlett-Packard, Sun Microsystems and Abbott Laboratories. During his time at HP, Ben was involved in several areas including Channel Management in distribution, setting up the dealer network, and other industry sectors, such as government, telecom, natural resources, system integration, ISV (independent software vendor) and financial services. Ben also co-founded GT Group Telecom, where revenues exceeded $225 million CAD annually, with a market cap of more than $1.2 billion dollars. He is currently a director of GiniClub.com, and held previous senior management positions with SinoFibre Communications and Municipal Software.

Anyone see this? This guy worked with Apple in the past. Great news!

http://tinkerine.com/wp-content/uploads/2016/01/ttd06242016final.pdf

Tinkerine Annual General Meeting Results and Appointments to
Board of Directors
Vancouver, B.C. – June 24, 2016 ­­ Tinkerine Studios Ltd. (“Tinkerine” or the “Company”)
(TSXV: TTD, FSE: WKN WB6B and OTC: TKSTF) i?s pleased to ?announce results from the Annual
General Meeting (“AGM”) held on June 23, 2016 in Vancouver, British Columbia. In addition to the
existing directors, the Company has added Mr. Bob Longo and Mr. Justin Sy to the Board of Directors.
New Additions to the Board of Directors
Mr. Bob Longo
Mr. Longo is current Chief Executive Officer (“CEO”) and President of Knowmatters, Inc., a US­based
education firm focused on cognitive learning and artificial intelligence. Mr. Longo has specific expertise
in CEO strategic and operational support, sales, marketing, executive general management and
strategic planning.
Mr. Longo previously held senior positions with Apple Inc., Carnegie Learning, Studywiz, SchoolOne
and NeXT Inc. During his tenure at Apple and NeXT his duties included responsibilities in both the
K­12 and Higher Education markets. Mr. Longo worked with Steve Jobs three times. He headed up
the K­12 market and later was President of Apple’s PowerSchool Division, leading it to three
consecutive years of increased growth in revenue, profit and market share. This included recognition
as the Software Information Industry Association’s (SIIA) CODIE winner each year, for Best Software
in its category. Mr. Longo was President, CEO and Vice Chairman at Carnegie Learning, a leading
adaptive math software developer and publisher. He successfully launched the Carnegie
Mellon’s spin­out penetrating 40% of the largest 100 US School Districts in its first 36 months, while
tripling revenue each year. At Carnegie Learning he was recognized as an Ernst &
Young Software Entrepreneur of the Year and was twice invited to present to the US governors at their
Education Technology Summit. At both PowerSchool and Carnegie Learning his teams secured 99%
Customer Retention Rates. Mr. Longo was Executive Vice President at Studywiz, and was responsible
for the expansion of sales to K­12 schools in North America and for developing strategic relationships
with major industry partners including Apple, Google and Microsoft. Mr. Longo was CEO of
SchoolOne, an education technology company that developed and marketed web­based, enterprise,
information software solutions to the K­12 market, their clients included all of the Catholic Schools in
the Silicon Valley.
Mr. Justin Sy, Interim Chief Financial Officer (“CFO”)
Mr. Sy is one of the founders of Tinkerine and has been directly involved in the development of
software for the DittoPro 3D Printer. Mr. Sy has participated in a number of 3D printing related
competitions and is the founder of Puppeteer, a 3D imaging software used to control hand motions via
a connected glove. Mr. Sy received a runner­up award for this project in the BCNET Digital Media
Challlenge. Mr. Sy also holds a B.Sc from Simon Fraser University. Mr. Sy was appointed interim CFO
on February 24, 2016.

lthough investors have soured on 3D printing stocks in recent years, the long-term growth prospects remain attractive. According to Wohlers Report 2014, a leading 3D printing insights report, the 3D printing industry is estimated to generate over $21 billion in worldwide revenue by 2020. If true, this growth would represent a more than fourfold increase from the $5.1 billion in revenue the industry generated in 2015.

In the context of falling 3D printing stocks, this growth potential could spell opportunity!

TKSTF LONG!