UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
Washington, DC 20549
FORM 8-K
CURRENT REPORT
Pursuant
to Section 13 OR 15(d)
of the Securities Exchange Act of 1934
Date of Report (Date of earliest event reported) February 10, 2016
Ampco-Pittsburgh Corporation
(Exact name of registrant as specified in its charter)
|
|
|
|
|
Pennsylvania |
|
1-898 |
|
25-1117717 |
(State or other jurisdiction
of incorporation) |
|
(Commission
File Number) |
|
(IRS Employer
Identification No.) |
|
|
|
726 Bell Avenue, Suite 301, Carnegie PA |
|
15106 |
(Address of principal executive offices) |
|
(Zip Code) |
Registrants telephone number, including area code (412) 456-4400
N/A
(Former name or
former address, if changed since last report).
Check the appropriate box below
if the Form 8-K filing is intended to simultaneously satisfy the filing obligation of the registrant under any of the following provisions:
¨ |
Written communications pursuant to Rule 425 under the Securities Act (17 CFR 230.425) |
¨ |
Soliciting material pursuant to Rule 14a-12 under the Exchange Act (17 CFR 240.14a-12) |
¨ |
Pre-commencement communications pursuant to Rule 14d-2(b) under the Exchange Act (17 CFR 240.14d-2(b)) |
¨ |
Pre-commencement communications pursuant to Rule 13e-4(c) under the Exchange Act (17 CFR 240.13e-4(c)) |
Item 7.01. |
Regulation FD Disclosure. |
Over the upcoming months of February and March, members of
senior management will be presenting to or conducting one-on-one meetings with investors and analysts about Ampco-Pittsburgh Corporation (the Corporation). A copy of the investor presentation slides, substantially in the form expected to
be used in such presentations and meetings, will be available on the Corporations website, www.ampcopgh.com. The investor presentation slides are attached as Exhibit 99.1 to this Current Report on Form 8-K and incorporated herein by
reference.
The information in this Item 7.01 shall not be deemed to be filed for the purposes of Section 18 of the
Securities Exchange Act of 1934 (the Exchange Act) or otherwise subject to the liabilities of that section, nor shall it be incorporated by reference into a filing under the Securities Act of 1933, or the Exchange Act, except as shall be
expressly set forth by specific reference in such a filing.
Item 9.01. |
Financial Statements and Exhibits. |
(d) Exhibits. The following material is filed
as an exhibit to this Current Report on Form 8-K:
|
|
|
Exhibit No. |
|
Description |
|
|
99.1 |
|
Investor Presentation Slides dated February 11, 2016. |
SIGNATURE
Pursuant to the requirements of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by
the undersigned hereunto duly authorized.
|
|
|
AMPCO-PITTSBURGH CORPORATION |
|
|
By: |
|
/s/ Marliss D. Johnson |
|
|
Marliss D. Johnson |
|
|
Chief Financial Officer and Treasurer |
Dated: February 10, 2016
February11, 2016 New York Hosted by
Janney Montgomery Scott LLP Ampco-Pittsburgh Corporation Exhibit 99.1
The Private Securities Litigation
Reform Act of 1995 (the “Act”) provides a safe harbor for forward-looking statements made by or on our behalf. This information may contain forward-looking statements that reflect our current views with respect to future events and
financial performance. All statements in this document other than statements of historical fact are statements that are, or could be, deemed forward-looking statements within the meaning of the Act. In this document, statements regarding future
financial position, sales, costs, earnings, cash flows, other measures of results of operations, capital expenditures or debt levels and plans, objectives, outlook, targets, guidance or goals are forward-looking statements. Words such as
“may,” “intend,” “believe,” “expect,” “anticipate,” “estimate,” “project,” “forecast” and other terms of similar meaning that indicate future events and
trends are also generally intended to identify forward-looking statements. Forward-looking statements speak only as of the date on which such statements are made, are not guarantees of future performance or expectations, and involve risks and
uncertainties. For Ampco-Pittsburgh, these risks and uncertainties include, but are not limited to, those described under Item 1A, Risk Factors, of Ampco-Pittsburgh’s Annual Report on Form 10-K. In addition, there may be events in the
future that we are not able to predict accurately or control which may cause actual results to differ materially from expectations expressed or implied by forward-looking statements. Except as required by applicable law, we assume no obligation, and
disclaim any obligation, to update forward-looking statements whether as a result of new information, events or otherwise.
Agenda Introduction to Ampco-Pittsburgh
Forged and Cast Engineered Products (Union Electric Steel) Air and Liquid Processing Strategies to improve Ampco-Pittsburgh’s Financial Performance Åkers Acquisition
Ampco-Pittsburgh Corporation Today
Ampco-Pittsburgh Corporation manufactures and sells highly engineered, high performance specialty metal products and customized equipment utilized by industry throughout the world.
Ampco-Pittsburgh Today (cont’d)
Headquarters – Carnegie, PA, U.S. Traded on NYSE. Symbol -- AP 2014 Revenue -- $272.8 M 1,000 employees Forged and Cast Engineered Products (66% of sales) A world leader in manufacture of steel rolls 90+ years of experience Four
manufacturing facilities in U.S. (pre-Åkers acquisition) Two roll manufacturing plants in China (joint ventures) One roll manufacturing plant in UK In 2015, acquired Alloys Unlimited and Processing (Ohio) Supplier of specialty tool, alloy, and
carbon steel round bar Forged and cast product distribution center for quick turnaround requests Air and Liquid Products (34% of sales) Custom-designed, specialty heat exchangers, air handling systems, and centrifugal pumps Three U.S. manufacturing
facilities in Virginia (2 plants) and New York
Ampco-Pittsburgh Corporation Today
(cont’d) Two Segments reported: 2014 Revenue Forged and Cast Engineered Products (Union Electric Steel) $179.3M Forged and Cast Rolls Open Die Forged Products Air and Liquid Processing $93.5M Aerofin-Heat Exchangers Buffalo Air
Handling–Custom Air Handling Systems Buffalo Pumps-Specialty Centrifugal Pumps
Union Electric Steel (UES)
Roll Products
Global Roll Market Cast Rolls$1,400M/yr
Forged Rolls$700M/yr Total$2,100M/yr
Rolls Staged in Hot Strip Mill
UES Locations Manufacturing Sales
Office Current Sales and Manufacturing Footprint
Region Company Name Estimated Global
Market Share EUR Åkers * 5% Coswig <2,5% ESW <2,5% GP <2,5% Innse <2% North America Åkers National Roll * <2% United <2% Whemco <2,5% S-AM Villares <2,5% Asia-Pacific Hitachi <2,5% Nippon Steel <2% China Gong
Chang 5% Xingtai 10% Region Company Name Estimated Global Market Share EUR Åkers * 3% Sheffield Forgemasters <2,5% Steinhoff <2% Villares <1,5% N. America UES 5% Whemco <2% Superior <1,5% S-AM Villares <2,5% A-PAC Hitachi 2,5%
Doosan <2,5% JCFC <2% JSW <1,5% China Xingtai 7% Baosteel 4% Competing Companies in Roll Industry Cast Rolls Forged Rolls Ampco expects to complete acquisition of Åkers in Q1 2016.
Air and Liquid Processing Segment
(A&LP)
Aerofin
Aerofin Products Copper spiral
finned nuclear stamped coil Split-Fit® Steam heating coils
Aerofin Serves Four Markets Fossil
fuel power generation Industrial Nuclear power generation OEM/Commercial
Buffalo Air Handling
Buffalo Air Handling Custom Air
Handling Systems Rooftop unit at a pharmaceutical manufacturing facility Triple stacked units being installed at a research facility in Illinois Air handling unit in our manufacturing plant for a medical center in New York
Buffalo Air Handling Serves Four
Markets Pharmaceutical Hospital University General Industries
Buffalo Pumps
Buffalo Pumps Products Specialized
Centrifugal Pumps Vertical double suction pump for a United States Navy surface vessel Vertical submerged lube oil pump Seal-less pump
Buffalo Pumps Serves Three
Markets
Strategies to Improve Ampco
Performance
Ampco’s Financial Performance
has Deteriorated in Recent Years Primarily Due to UES Performance Global steel market depressed since 2011 UES’s sales, margins, and profits have declined Air and Liquid Processing profitable, consistent performer, but lacks growth
Key Strategies to Improve A&LP
Performance Grow revenue (market share) Reduce costs, increase margins Strengthen engineering and manufacturing capabilities Revise sales and marketing approach
Air and Liquid Processing Estimated
Organic Growth 2015-2018 * Based on successful implementation of 3-year STRATEGIC PLAN
Ampco’s Performance
Historically Driven by UES UES primarily serves the steel and aluminum industries Current steel industry market conditions: 2015 global capacity utilization 65%-75% Idled capacity in North America and Europe Excess global steelmaking capacity
impacting customer financial performance Cost control extended to vendor purchases Price concessions expected Emphasis on roll cost, not performance Impact of steel industry conditions on UES Volume, revenue, and margin decline No industry recovery
expected until 2017
Strategies to Improve Ampco’s
Financial Performance and Status: Stabilize and Optimize UES: in progress Reduce costs: completed stage 1, stage 2 in progress Achieve product diversification: initiated, revenue growing Identify and complete strategic acquisitions: in progress
Revive R&D (new high performance products): in progress Fill product gaps: complete with Åkers acquisition Develop low cost alternative roll: step 1- complete with Åkers acquisition
Cost Reduction Strategy is Underway
Initiated $10M corporate-wide cost reduction program in 2015 Centralized overhead functions to increase efficiency Implemented approximately 10% reduction in force (approximately 100 employees) Froze defined benefit pension plan for salaried
employees Froze defined benefit pension plan, added contributory health, and reduced number of job classifications at unionized manufacturing plant in Carnegie, PA Relocated corporate headquarters to Carnegie, PA to eliminate $~500K in annual rent
and related costs* *Lease on former HQ expires February 2016. All other savings will be fully realized in 2016.
Strategies to Diversify UES Product
Portfolio for Growth Utilize flexible manufacturing assets to diversify and offset roll/steel industry cyclicality Optimize market pull into fracking industry and others Capitalize on opportunity to diversify into broader markets beyond fracking
Research M&A opportunities Acquired Alloys Unlimited distribution center –July 2015
In North America Open Die Sales
Market is 10X Larger than Roll Market Source: FIA
Diversification through Open Die
Forged Engineered Products (FEP) Fracking pump unit Mud Pump Fluid end Multiple fracking pump units on-site
FEP Products - Bars
Annual Fracking Block Market is
$200-300M Lowered in September Integrated shop = supply chain advantage
Union Electric Steel Estimated
Organic Growth 2015-2018 Revenue * Based on successful implementation of 3-year STRATEGIC PLAN *
Ampco-Pittsburgh Corporation
Estimated Organic Growth 2015-2018 Average CAGR > 10% * * Based on successful implementation of 3-year STRATEGIC PLAN
Strategies to Return Ampco
Profitability Include Strategic Acquisitions Acquired Alloys Unlimited & Processing Company in 2015 Forged and cast product distribution center Includes short turnaround and emergency supply Acquisition of Åkers AB from Altor Fund II GP
Limited expected to be completed by 3/31/2016
Åkers Acquisition
Why Acquire Åkers? Combines the
two top competitors in the roll industry, both recognized for product performance, technology, and customer service Manufacturing Adds four roll production facilities, including two low-cost producers Sweden U.S. Slovenia China J-V Adds cast roll
production in U.S. Adds forged roll supply to Europe Adds lower cost product alternative
Why Acquire Åkers?
(cont’d) Sales/Marketing Joins complementary product lines (Ampco’s strength in forged rolls; Åkers strength in cast rolls) Creates complete product line Fills gaps in UES’s product portfolio Increases potential customer base
to include all steel and aluminum mills Provides both high-performance, high quality rolls and low-cost rolls Accelerates R&D product launches Adds 14 sales offices and complement of sales personnel Transforms Ampco into more of a global
competitor Adds sales office in Brazil, Germany, Turkey, Egypt and Singapore Establishes a center of strength in Asia Pacific, the world’s largest market for rolls Add service capability in U.S. (Vertical Seal in PA) – closer to
customer
UES Locations Manufacturing Sales
Office Global Footprint – Post Transaction Åkers Locations Manufacturing Sales Office
Financial Benefits of Åkers
Acquisition Should contribute to stabilizing UES and improving performance of Ampco Revenue from roll business should essentially double Acquisition should be accretive in 2016 (excluding “costs”) Cost reduction and other synergies
estimated to be $15M Synergies estimated to be fully realized in 12-15 months Estimated cost to realize synergies: $4 to $5M Provides potential currency “balance”
Terms of Definitive Agreement to
Purchase Åkers AB Purchase price ~$80M $30M cash/borrowings -payable at closing $20M Ampco stock- estimated dilution 15% to 17% $30M notes – payable three years from closing 6.5% compound interest rate $36M to $37M at maturity
Thank you Questions Ampco-Pittsburgh
Corporation
Ampco Pittsburgh (NYSE:AP)
Historical Stock Chart
From Apr 2024 to May 2024
Ampco Pittsburgh (NYSE:AP)
Historical Stock Chart
From May 2023 to May 2024