TSX-V: MKO
VANCOUVER, Aug. 19, 2019 /CNW/ - Mako Mining
Corp. (TSX-V: MKO) ("Mako" or the
"Company") is pleased to announce additional positive drill
results from the Las Conchitas area of its wholly-owned San
Albino-Murra property located in Nueva
Segovia, Nicaragua.
The objective of the 2019 drilling campaign is to test high
priority exploration targets within the Las Conchitas area,
identified by trenching, geochemical soil surveys, extensive
geological mapping and sampling of historical workings.
The El Limon Zone was identified by a large 570 m by 280 m gold
in soils anomaly, oriented in a northeast-southwest
direction. The El Limon soil anomaly appears to be a
continuation of the Mango gold geochemical anomaly which has been
tested and confirmed by drilling (see press release dated
May 6, 2019).
The Company has completed 13 shallow drill holes totaling
1,060 m at the El Limon Zone (see the
attached map), with a goal to test the strike and dip extension of
the Mango Zone, where the Company intersected the highest gold
grade drilled to date of 376.49 g/t Au over 1 m in drill hole LC19-70 (see press release
dated May 6, 2019).
Drill hole LC19-101 intersected two mineralized zones, separated
by a 2.5 m interval of low grade gold
mineralization as follows: 4.62 g/t Au and 12.0 g/t Ag over
2.1 m and 19.55 g/t Au and 40.6 g/t
Ag over 1.2 m (see table below and
attached cross section). This hole is located approximately
320 m southwest, and along strike, of
drill hole LC11-01, which intersected 69.96 g/t Au and 61.7 g/t Ag
over 3.0 m (see Golden Reign
Resources Ltd. press release dated February
22, 2012).
2019 Diamond Drill Results in the El Limon Zone
Drill
Hole
|
From
(m)
|
To
(m)
|
Width
(m)*
|
Au
(g/t)
|
Ag
(g/t)
|
Interval
Averages
|
LC19-89
|
16.35
|
17.35
|
1.00
|
4.92
|
2.2
|
4.92 g/t Au and
2.2 g/t Ag over 1.0 m
|
LC19-91
|
84.70
|
85.80
|
1.10
|
18.59
|
7.9
|
18.59 g/t Au and
7.9 g/t Ag over 1.1 m
|
LC19-95
|
12.00
|
13.50
|
1.50
|
1.11
|
2.4
|
1.11 g/t Au and
2.4 g/t Ag over 1.5 m
|
LC19-96
|
16.00
|
16.50
|
0.50
|
36.46
|
27.0
|
36.46 g/t Au and
27.0 g/t Ag over 0.5 m
|
LC19-101
|
85.60
|
86.80
|
1.20
|
3.24
|
4.6
|
4.62 g/t Au and
12.0 g/t Ag over 2.1 m
|
LC19-101
|
86.80
|
87.70
|
0.90
|
6.46
|
21.9
|
LC19-101
|
90.20
|
91.40
|
1.20
|
19.55
|
40.6
|
19.55 g/t Au and
40.6 g/t Ag over 1.2 m
|
The mineralized intervals shown above utilize a 1.0 g/t gold
cut-off grade with not more than 1.0 meter of internal dilution.
Lengths are reported as core lengths. Drill holes LC19-93, LC19-94,
LC19-99 and LC19-100 intercepted faults and were abandoned prior to
reaching their target depth. Drill holes LC19-90, LC19-92,
LC19-97 and LC19-98 intercepted faults at the projected depth of
the mineralized zone and returned gold values below the cut-off
grade. *True widths vary depending on drill hole dip, the veins are
shallow dipping and typical true widths are 85-100% of the downhole
width.
Sampling, Assaying, QA/QC and Data Verification
Drill core was continuously sampled from inception to
termination of the drill hole. Sample intervals were
typically one meter. Drill core diameter was HQ (6.35
centimeters). Geologic and geotechnical data was captured
into a digital database, core was photographed, then one-half split
of the core was collected for analysis and one-half was retained in
the core library. Samples were kept in a secured logging and
storage facility until such time that they were delivered to the
Managua facilities of Bureau
Veritas and pulps were sent to the Bureau Veritas laboratory in
Vancouver for analysis. Gold
was analyzed by standard fire assay fusion, 30 gram aliquot, AAS
finish. Samples returning over 10.0 g/t gold are analyzed
utilizing standard Fire Assay-Gravimetric method. Due to the
presence of coarse gold, the Company has used 500-gram metallic
screened gold assays for analyzing samples that yielded a fire
assay result greater than 1 g/t, and samples immediately above and
below drilled veins. This method, which analyzes a larger
sample, can be more precise in high-grade vein systems containing
coarse gold. All reported drill results in this press release used
the metallic screening method. The Company follows industry
standards in its QA&QC procedures. Control samples consisting
of duplicates, standards, and blanks were inserted into the sample
stream at a ratio of 1 control sample per every 10 samples.
Analytical results of control samples confirmed reliability of the
assay data.
Qualified Person
John M. Kowalchuk, P.Geo, a
geologist and qualified person (as defined under NI 43-101) has
read and approved the technical information contained in this press
release. Mr. Kowalchuk is a senior geologist and a consultant to
the Company.
On behalf of the Board,
"Akiba Leisman"
CEO
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration firm. The Company is developing its high-grade San
Albino gold project in Nueva
Segovia, Nicaragua. Mako's
primary objective is to bring San Albino into production quickly
and efficiently, while continuing exploration of prospective
targets in Nicaragua.
Forward-Looking Statements: Some of the
statements contained herein may be considered "forward-looking
information" within the meaning of applicable securities
laws. Forward-looking information is based on certain
expectations and assumptions, including that the Company's
exploration programs will be successfully completed; that although
the Company's production decision at its San Albino project is not
based on a technical study supporting mineral reserves, and
therefore not based on demonstrated economic viability, management
currently believes the project is on track to achieve its first
gold pour by the late summer of 2020; that the Company will be
successful in its proposed financing plans necessary for the
construction at the San Albino project. Such forward-looking
information is subject to a variety of risks and uncertainties
which could cause actual events or results to differ materially
from those reflected in the forward-looking information, including,
without limitation, the risks that additional satisfactory
exploration results at the Mango zone will not be obtained; that
the PEA is preliminary in nature and there is no certainty that the
PEA will be realized; the risk of economic and/or technical failure
at the San Albino project associated with basing a production
decision on the PEA without demonstrated economic and technical
viability; that exploration results will not translate into the
discovery of an economically viable deposit; risks and
uncertainties relating to political risks involving the Company's
exploration and development of mineral properties interests; the
inherent uncertainty of cost estimates and the potential for
unexpected costs and expense; commodity price fluctuations, the
inability or failure to obtain adequate financing on a timely basis
and other risks and uncertainties. Such information contained
herein represents management's best judgment as of the date hereof,
based on information currently available and is included for the
purposes of providing investors with the Company's plans and
expectations at its San Albino project and the Las Conchitas area,
and may not be appropriate for other purposes. Mako does not
undertake to update any forward-looking information, except in
accordance with applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
SOURCE Mako Mining Corp.