TSX: TML
OTCQX: TSRMF
New gold discovery at Ocelot target, as well as positive gold
results from Fold Nose and Far East.
Highlights:
- Far East hole TL21-568 with 6.95 g/t Au over 1.0 metre from
86.0 to 87.0 metres downhole and 0.51 g/t Au over 13.5 metres from
172.5 to 186.0 metres downhole.
- Fold Nose hole TL21-578 with 0.54 g/t Au over 7.5 metres
including 1.24 g/t Au over 1.5 metres from 170.0 to 177.5 metres
downhole.
- Fold Nose hole TL21-576 with 0.23 g/t Au over 28.0 metres
from 100.0 to 128.0 metres downhole.
- Ocelot hole OC-21-003 with 0.92 g/t Au over 2.0 metres from
79.0 to 81.0 metres downhole on a new target identified by Treasury
Metals Geology team.
TORONTO, Feb. 17, 2022 /CNW/ - Treasury Metals Inc.
(TSX: TML) (OTCQX: TSRMF) ("Treasury" or the
"Company") is pleased to announce results on three
exploration targets tested during the 2021 drill campaign. Gold was
discovered at the Ocelot target for the first time, and positive
gold results were encountered in new drillholes at the previously
identified Far East and Fold Nose mineralizations. These successes
are part of Treasury's 2021/2022 discovery program, supporting the
development of the Goliath, Goldlund and Miller resources, and
confirm our belief that Treasury's land position will continue to
deliver new discoveries.
The targets have assays pending, and all three are open at
depth. The Ocelot discovery is one of a series of
geophysical anomalies on the Goldlund structural trend northeast of
the Goldlund deposit, undrilled prior to the 2021 campaign.
Jeremy Wyeth, President and CEO
of Treasury Metals, commented: "I am very pleased to see positive
results coming back on all of these three exploration targets. In
2021, we re-established a discovery drilling program focusing on
identifying new targets for the first time since 2012 on Goliath
and 2018 on Goldlund. Today's discovery at Ocelot, with a number of
new targets being drilled in early 2022, coupled with more gold
results from Fold Nose and Far East, show the first-class
exploration potential on Treasury's large land position, close to
the planned processing facilities, which will be described in the
Pre- Feasibility Study slated for later in the year."
Ocelot
During the 2021 drill campaign, the Company
tested two Wild Cat targets on the Goldlund structural trend
northeast of the Goldlund deposit. These targets were based on a
series of geophysical anomalies with similar footprints to the
Goldlund and Miller Deposits and sit located between the two
deposits (Figure 1). Results released today are from four holes
(897 metres) testing the Ocelot target over a strike length of 800
metres. From the logging and assay results, the Company believes
this area hosts geology and mineralization similar to Zone 4 at
Goldlund where a network of porphyry dykes creates a competency
contrast allowing mineralizing fluids to penetrate in and adjacent
to these dykes (Figure 2). Initial results are promising, showing
mineralizing fluids two kilometres away from the Goldlund
Deposit. Additional work is needed to determine the potential
for more significant width or grade of mineralization. Results are
pending on the second target, Caracal, but logging for that target
showed geology more similar to Zone 1, Zone 7 and Zone 2/3 at
Goldlund.
Far East
Located approximately 8km to East of the
Goliath Deposit, the Far East target was based on geophysical
trends that were first identified in 2011. The Company completed a
four-hole test program on the target in 2012, with the last hole
intersecting Goliath-style host rock, alteration and
mineralization. With a renewed focus on growth through exploration
the Company completed a six-hole (1,998 metres) initial program to
test the continuity and get a better understanding of the geology
in the area. The mineralization was found within felsic to
intermediate volcanic rocks and associated with disseminated pyrite
and trace sphalerite, both of which are characteristic of the
Goliath deposit. Elevated results also correspond near and
along the boundary of felsic porphyry intrusions. While not
directly associated with Goliath mineralization, deformed
porphyries are commonly identified in the hanging wall sediments
above the deposit and could have played a role in fluid movement
and the original emplacement of gold. Results are pending for
the final two drillholes of the initial program. Once
received, the program results will be analyzed and additional
drillholes will be designed to further develop our understanding of
this prospective target.
Highlights from the Far East include hole TL21-568, which
intersected 1.0 metre grading 6.95 g/t Au and 13.5 metres grading
0.51 g/t Au (Figure 5). The porphyry dykes noted in logging of this
Far East drill program may indicate that this mineralization is
related to the hanging wall mineralization at Goliath and therefore
the geology team will review the positions for follow up drilling
to expand the potential for Goliath Main Zone type of
mineralization to the northwest of these results.
Fold Nose
The Company completed a ten-hole (2,868
metre) drill program on the Fold Nose exploration area in 2021.
This program was designed to aid in the geological understanding of
the area. The geology team has been working to develop a geological
model for the area and work is underway to constrain the controls
on the higher-grade mineralization. The geology team sees that the
host stratigraphy for the Goliath Deposit continues to the east and
into the Fold Nose target area. The primary low-grade VMS
stratigraphically-contained mineralization appears to be continuous
from the Goliath Deposit to the east into the Fold Nose. The team
has been able to model the fold geometry using structural
measurements from surface mapping and host lithology marker
horizons (Figure 4). Treasury is pleased to see the continuity of
the primary low-grade VMS stratigraphically-contained
mineralization, hole TL21-576 intercepted several wide lower-grade
zones including 28.0 metres grading 0.23 g/t Au. Also, hole
TL21-578 also intersected wide lower-grade zones including 7.5
metres grading 0.54 g/t Au and 33.1 metres grading 0.13 g/t
Au.
The 2021 and 2022 drill campaigns are focused on unlocking the
control of the higher-grade mineralization in the area. Our current
theory for the control of the higher-grade mineralization is that
it is related to stacked vein sets noted by geologists on surface
and in core. Results from the 2021 drill program at the Fold Nose
will help to increase the understanding of the controls on
mineralization in this area. The company also plans to do detailed
geological mapping in the Fold Nose to confirm the orientation of
the quartz veins in the summer of 2022.
Table 1: New Significant Gold Intercepts from
Recent Drilling
Far
East
|
Drill
Hole
|
|
Target
|
From
(m)
|
To
(m)
|
Sample Length
(m)
|
Grade g/t
Au
|
TL21-568
|
|
Far East
|
86.00
|
87.00
|
1.00
|
6.95
|
|
|
|
|
|
|
|
TL21-568
|
|
Far East
|
172.50
|
186.00
|
13.50
|
0.51
|
TL21-569
|
|
Far East
|
271.80
|
278.00
|
6.20
|
0.72
|
TL21-571
|
|
Far East
|
158.00
|
159.00
|
1.00
|
2.08
|
TL21-572
|
|
Far East
|
132.00
|
140.00
|
8.00
|
0.38
|
|
Including
|
|
132.00
|
133.00
|
1.00
|
2.33
|
Fold
Nose
|
Drill
Hole
|
|
Target
|
From
(m)
|
To
(m)
|
Sample Length
(m)
|
Grade g/t
Au
|
TL21-576
|
|
Fold Nose
|
53.00
|
66.00
|
12.00
|
0.21
|
|
Including
|
|
53.00
|
58.00
|
5.00
|
0.37
|
|
And
including
|
|
53.00
|
54.00
|
1.00
|
1.35
|
TL21-576
|
|
Fold Nose
|
81.00
|
84.00
|
3.00
|
0.66
|
TL21-576
|
|
Fold Nose
|
100.00
|
128.00
|
28.00
|
0.23
|
|
Including
|
|
100.00
|
105.80
|
5.80
|
0.39
|
TL21-576
|
|
Fold Nose
|
160.00
|
169.00
|
9.00
|
0.21
|
|
Including
|
|
164.00
|
168.00
|
4.00
|
0.36
|
TL21-578
|
|
Fold Nose
|
58.00
|
62.60
|
4.60
|
0.17
|
TL21-578
|
|
Fold Nose
|
170.00
|
177.50
|
7.50
|
0.54
|
|
Including
|
|
173.00
|
174.50
|
1.50
|
1.24
|
TL21-578
|
|
Fold Nose
|
211.00
|
220.00
|
9.00
|
0.34
|
TL21-578
|
|
Fold Nose
|
241.00
|
247.00
|
6.00
|
0.33
|
TL21-578
|
|
Fold Nose
|
301.50
|
334.60
|
33.10
|
0.13
|
|
Including
|
|
325.50
|
334.60
|
9.10
|
0.22
|
Ocelot
|
Drill
Hole
|
|
Target
|
From
(m)
|
To
(m)
|
Sample Length
(m)
|
Grade g/t
Au
|
OC-21-001
|
|
Ocelot
|
71.00
|
72.00
|
1.00
|
1.08
|
OC-21-002
|
|
Ocelot
|
57.00
|
58.00
|
1.00
|
0.24
|
OC-21-003
|
|
Ocelot
|
79.00
|
81.00
|
2.00
|
0.92
|
OC-21-004
|
|
Ocelot
|
137.00
|
140.00
|
3.00
|
0.49
|
OC-21-004
|
|
Ocelot
|
219.00
|
220.00
|
1.00
|
1.27
|
Note: Reported
intervals are drilled core lengths and do not indicate true widths.
For duplicate samples, the original sample assays are used to
calculate the intersection grade. All grades are
un-capped.
|
QA / QC
The Company has implemented a quality
assurance and quality control (QA/QC) program to ensure sampling
and analysis of all exploration work is conducted in accordance
with the CIM Exploration Best Practices Guidelines. The drill core
is sawn in half with one-half of the core sample dispatched to
Activation Laboratories Ltd. facility located in Dryden, Ontario. The other half of the core is
retained for future assay verification and/or metallurgical
testing. Other QA/QC procedures include the insertion of blanks and
Canadian Reference Standards for every tenth sample in the sample
stream. A quarter core duplicate is assayed every 20th
sample. The laboratory has its own QA/QC protocols running
standards and blanks with duplicate samples in each batch
stream. Additional checks are routinely run on anomalous
values including gravimetric analysis and pulp metallic screen fire
assays. Gold analysis is conducted by lead collection, fire assay
with atomic absorption and/or gravimetric finish on a 50-gram
sample. Check assays are conducted at a secondary ISO certified
laboratory (in this case AGAT Laboratories located in Mississauga, Ontario) following the completion
of a program.
Qualified Persons
Maura Kolb, M.Sc., P.Geo., Director of
Exploration and Adam Larsen, P.
Geo., Exploration Manager, are both considered as a "Qualified
Person" for the purposes of National Instrument 43-101 Standards of
Disclosure for Mineral Projects ("NI 43-101"), and have
reviewed and approved the scientific and technical disclosure
contained in this news release on behalf of Treasury.
About Treasury Metals Inc.
Treasury Metals Inc. is a
gold focused company with assets in Canada. Treasury's Goliath Gold Complex, which
includes the Goliath, Goldlund and Miller deposits, is located in
Northwestern Ontario. The deposits
benefit substantially from excellent access to the Trans-Canada
Highway, related power and rail infrastructure, and close proximity
to several communities including Dryden,
Ontario. The Company also owns several other projects
throughout Canada, including the
Lara Polymetallic Project, Weebigee-Sandy Lake Gold Project JV, and
grassroots gold exploration property Gold Rock. Treasury Metals is
committed to inclusive, informed and meaningful dialogue with
regional communities and Indigenous Nations throughout the life of
all our Projects and on all aspects, including: creating
sustainable economic opportunities, providing safe workplaces,
enhancing of social value, and promoting community well-being.
For information on the Goliath Gold Complex, please refer to the
preliminary economic assessment, prepared in accordance with
NI43–101, entitled "NI 43–101 Technical Report & Preliminary
Economic Assessment of the Goliath Gold Complex: and dated
March 10, 2021 with an effective date
of January 28, 2021, led by
independent consultants Ausenco Engineering Canada Inc. The
technical report is available on SEDAR atwww.sedar.com, on the
OTCQX at www.otcmarkets.com and on the Company website at
www.treasurymetals.com.
To view further details about Treasury, please visit the
Company's website at www.treasurymetals.com.
Neither the TSX nor its Regulation Services Provider (as that
term is defined in the policies of the TSX) accepts responsibility
for the adequacy or accuracy of this release.
Forward-Looking Statements
This release includes
certain statements that may be deemed to be "forward-looking
statements". All statements in this release, other than statements
of historical facts, that address events or developments that
management of the Company expect, are forward-looking statements.
Forward-looking statements are frequently, but not always,
identified by words such as "expects", "anticipates", "believes",
"plans", "projects", "intends", "estimates", "envisages",
"potential", "possible", "strategy", "goals", "objectives", or
variations thereof or stating that certain actions, events or
results "may", "could", "would", "might" or "will" be taken, occur
or be achieved, or the negative of any of these terms and similar
expressions. Actual results or developments may differ materially
from those in forward-looking statements. Treasury disclaims any
intention or obligation to update or revise any forward-looking
statements, whether as a result of new information, future events
or otherwise, save and except as may be required by applicable
securities laws.
Since forward-looking information address future events and
conditions, by their very nature they involve inherent risks and
uncertainties. Actual results could differ materially from those
currently anticipated due to a number of factors and risks. These
include, but are not limited to, exploration and production for
precious metals; delays or changes in plans with respect to
exploration or development projects or capital expenditures; the
uncertainty of resource estimates; health, safety and environmental
risks; worldwide demand for gold and base metals; gold price and
other commodity price and exchange rate fluctuations; environmental
risks; competition; incorrect assessment of the value of
acquisitions; ability to access sufficient capital from internal
and external sources; and changes in legislation, including but not
limited to tax laws, royalties and environmental
regulations.
Actual results, performance or achievement could differ
materially from those expressed in, or implied by, the
forward-looking information and, accordingly, no assurance can be
given that any of the events anticipated by the forward-looking
information will transpire or occur, or if any of them do so, what
benefits may be derived therefrom and accordingly, readers are
cautioned not to place undue reliance on the forward-looking
information.
Note to United States Investors
All resource
estimates included in this press release have been prepared in
accordance with Canadian standards, which differ in some respects
from United States standards. In
particular, and without limiting the generality of the foregoing,
the terms "inferred mineral resources," "indicated mineral
resources," "measured mineral resources" and "mineral resources"
that may be used or referenced are Canadian mining terms as defined
in accordance with National Instrument 43 101 – Standards of
Disclosure for Mineral Projects under the guidelines set out in the
Canadian Institute of Mining, Metallurgy and Petroleum (the "CIM")
Standards on Mineral Resources and Mineral Reserves (the "CIM
Standards"). The CIM Standards differ significantly from standards
in the United States. While the
terms "mineral resource," "measured mineral resources," "indicated
mineral resources," and "inferred mineral resources" are recognized
and required by Canadian regulations, they are not defined terms
under standards in the United
States. "Inferred mineral resources" have a great amount of
uncertainty as to their existence, and great uncertainty as to
their economic and legal feasibility. It cannot be assumed that all
or any part of an inferred mineral resource will ever be upgraded
to a higher category. Under Canadian securities laws, estimates of
inferred mineral resources may not form the basis of feasibility or
other economic studies. Readers are cautioned not to assume that
all or any part of measured or indicated mineral resources will
ever be converted into reserves. Readers are also cautioned not to
assume that all or any part of an inferred mineral resource exists
or is economically or legally mineable. Disclosure of "contained
ounces" in a resource is permitted disclosure under Canadian
regulations; however, United
States companies are only permitted to report mineralization
that does not constitute "reserves" by standards in the United States as in place tonnage and
grade without reference to unit measures. Accordingly, information
regarding resources contained or referenced in this [name of
disclosure document] containing descriptions of our mineral
deposits may not be comparable to similar information made public
by United States
companies.
SOURCE Treasury Metals Inc.