TSX-V: MKO; OTCQX: MAKOF
VANCOUVER, BC, Jan. 21, 2021 /CNW/ - Mako Mining
Corp. (TSXV: MKO) (OTCQX: MAKOF) ("Mako" or the "Company")
is pleased to report grade and tonnage results from mining of the
upper half of the third bench of the San Albino vein at its San
Albino gold project ("San Albino") in northern Nicaragua. The
mined bench consisted of one three-meter half bench between 601 and
604 meters above sea level ("Half Bench 601") and contained 815
ounces Au and 1,456 ounces Ag within 1,784 tonnes of diluted vein
material grading 14.21 g/t Au and 25.4g/t Ag.
The 1,784 tonnes of diluted vein material are now sitting in a
high-grade stockpile awaiting processing in addition to the 5,121
tonnes from the first two full benches (see press release dated
November 10, 2020). An
additional 5,249 tonnes of historical dump material grading 2.03
g/t Au were also mined from Half Bench 601. This stockpiled
historical dump material is expected to be used as initial mill
feed during the ramp up to commercial production, which is expected
from January 2021 to early Q2
2021.
Akiba Leisman, Chief Executive
Officer of Mako states that, "the stockpile we've developed now
contains almost 5,000 ounces of gold. Our 500 tonne per day
processing plant is nearing completion, with the crusher and mill
operational. This stockpile will provide the necessary
flexibility to ramp up operations at San Albino after our
anticipated first gold pour later this month, such that we can
expect to commence commercial production in early Q2."
Diluted Vein
Material Sent to Stockpile
|
Bench
|
Diluted
Vein
Tonnes*
|
Diluted
Grade
Au
(g/t)
|
Diluted
Grade
Ag (g/t)
|
Ounces
Au
|
Ounces
Ag
|
610
|
2,654
|
11.74
|
17.7
|
1,002
|
1,511
|
604
|
2,467
|
19.32
|
32.4
|
1,532
|
2,569
|
601 (½)
|
1,784
|
14.21
|
25.4
|
815
|
1,456
|
Total
|
6,905
|
15.09
|
24.9
|
3,349
|
5,536
|
*Total Tonnes are estimated by subtracting laser survey scans
of the topography before and after mining the bench.
Breakdown of Total
Material Sent to Stockpile From Benches 610, 604 and
Half Bench 601
|
Material
|
Tonnes
|
Grade
Au (g/t)
|
Grade
Ag (g/t)
|
Ounces
Au
|
Ounces
Ag
|
Diluted
Vein
|
6,905
|
15.09
|
24.9
|
3,349
|
5,536
|
Historical
Dump
|
21,799
|
2.27
|
4.6
|
1,589
|
3,232
|
Total
|
28,704
|
|
|
4,938
|
8,768
|
Sampling, Assaying, QA/QC and Grade Estimation
Vertical channel samples respecting the geology were collected
on 5-meter sections at approximately 4-meter spacing using a
gas-powered rock saw where the vein is competent, or a rock hammer
where the rock is strongly fractured or brecciated. Special
attention is applied to standardize the width and volume of
material taken using the rock hammer or rock saw. The
coordinates of the channel samples are surveyed using a total
station surveying device.
Samples were kept in a secured logging and storage facility
until such time that they were delivered to the Managua facilities of Bureau Veritas, an
independent assay lab, for sample preparation. Pulps were
sent to the Bureau Veritas laboratory in Vancouver for analysis. Gold was
analyzed by standard fire assay fusion, 30-gram aliquot, AAS
finish. Samples returning over 10.0 g/t Au are analyzed
utilizing standard fire assay-gravimetric method. The Company
follows industry standards in its quality assurance and quality
control ("QA/QC") procedures. Control samples consisting of
duplicates, standards and blanks were inserted into the sample
stream at a ratio of 1 control sample per every 3 to 4 samples.
Analytical results of control samples confirmed reliability
of the assay data.
The grade of the San Albino vein, low-grade and historical dump
material were estimated using the inverse distance cubed method
("ID3") from 1-meter composite intervals respecting the
geologic boundaries. Samples were capped prior to compositing
at 100 g/t Au in the San Albino vein, 7.0 g/t Au in the San Albino
footwall, 4 g/t Au in the San Albino hanging wall and 7.0 g/t Au in
the Dump Material. Capping values were based an analysis of
previous diamond drilling results. The diluted grade of the
San Albino vein was estimated using 3-D models of surveyed vein
boundaries and surveyed mined surfaces.
Qualified Person
Steven Ristorcelli, CPG, a
geologist and qualified person (as defined under NI 43-101) has
read and approved the technical information contained in this press
release. Mr. Ristorcelli is the Principal Geologist at Mine
Development Associates in Reno. Mr. Ristorcelli was at site
in February 2020, but has not been
able to visit the site to personally review the ongoing
grade-control program; however, he has reviewed the data from
original certificates, QA/QC data, photographs of the geology,
mapping and the grade-control model.
On behalf of the Board,
Akiba
Leisman
Chief Executive Officer
About Mako
Mako Mining Corp. is a publicly listed gold mining, development
and exploration firm. The Company is developing its high-grade San
Albino gold project in Nueva
Segovia, Nicaragua. Mako's
primary objective is to bring San Albino into production quickly
and efficiently, while continuing exploration of prospective
targets in Nicaragua.
Forward-Looking Information:
Forward-Looking Information: Some of the statements
contained herein may be considered "forward-looking information"
within the meaning of applicable securities laws. The
forward-looking information contained herein is based on the
Company's plans and certain expectations and assumptions, including
the expectation that stockpiled historical dump material
will be used as initial mill feed during the ramp up to commercial
production; that commercial production will occur during the period
from January 2021 to early Q2
2021; management expects the fully diluted open pit grade of
9.54 g/t Au in the Measured and Indicated categories can be met or
exceeded when mined; and that the Company's first gold pour is
expected in January 2021. Such
forward-looking information is subject to a variety of risks and
uncertainties which could cause actual events or results to differ
materially from those reflected in the forward-looking information,
including, without limitation, the risk of economic and/or
technical failure at the San Albino project associated with basing
a production decision on the preliminary economic assessment
without demonstrated economic and technical viability; that the
Company is not able to declare commercial production in early
2021; that the processed mineralization returns unexpected results;
that the Company does not continue to find positive results from
its ongoing reconnaissance exploration program; that exploration
and assay results do not confirm continuity of mineralization as
expected; political risks and uncertainties involving the Company's
exploration properties; the inherent uncertainty of cost estimates
and the potential for unexpected costs and expense; commodity price
fluctuations and other risks and uncertainties as disclosed in the
Company's public disclosure filings on SEDAR at www.sedar.com. Such
information contained herein represents management's best judgment
as of the date hereof, based on information currently available and
is included for the purposes of providing investors with the
Company's expectations regarding the San Albino gold project, and
may not be appropriate for other purposes. Mako does not
undertake to update any forward-looking information, except in
accordance with applicable securities laws.
Neither the TSX Venture Exchange nor its Regulation Services
Provider (as that term is defined in the policies of the TSX
Venture Exchange) accepts responsibility for the adequacy or
accuracy of this release.
SOURCE Mako Mining Corp.