TIDMATYM
RNS Number : 6937L
Atalaya Mining PLC
23 April 2018
23 April 2018
Atalaya Mining Plc
("Atalaya" or the "Company")
Proyecto Touro Pre-feasibility Study
Atalaya Mining plc (AIM:ATYM, TSX:AYM) is pleased to announce
the completion of a pre-feasibility study ("PFS") for a proposed
copper open pit mine and concentrator at its Proyecto Touro in
north west Spain.
Highlights
Strong Project Economics
-- NPV post-tax at 8% discount rate of $180 million using long term copper price of US3.00/lb
-- Unlevered IRR of 20.5%
-- Total free cash flow of $489 million
-- Annual average free cash flow of $60m from commercial production
Low cost Operations
-- Estimated average C1 cash costs of US$1.73/lb of payable Cu net of silver credits
-- All-in sustaining costs ("AISC") of US$1.85/lb of payable Cu net of silver credits
Capital Costs and Infrastructure
-- Pre-production capital expenditure of $165 million with an
additional expansion capital estimate of $30 million in year
eight
-- Low LOM sustaining capital expenditure of $55 million
Project Parameters
-- Contained copper, within P&P reserves only, is estimated
at 392,000 tonnes and 2.1 million ounces of silver
-- 2 years of development and 12 years of operation
-- Average yearly production of 30,000 tonnes copper and 70,000
ounces of silver in concentrate
-- Shallow open pit mining with low waste-to-ore ratio of 2.43
-- Very clean high-grade copper concentrates
Overview and Introduction
Proyecto Touro is a brownfield copper project located in the A
Coruña province of the Galicia region, in north west Spain. The
pre-feasibility study report was prepared using the headings of,
and guidance set out in NI43-101.
The Project consists of a number of deposits of which four have
partially been mined in the past (Arinteiro, Vieiro, Bama and
Brandelos), and two which have not been previously mined (Monte de
las Minas and Arca). The Project site is spread over approximately
800 ha within mineral rights over approximately 15,300 ha of
contiguous exploration rights. Mineral resources identified to
date, and subject to the current PFS, are located exclusively in
the San Rafael Mining Concession.
As previously reported, Atalaya entered into a purchase option
agreement to acquire a majority interest in the Project. The option
agreement gave Atalaya an exclusive option to purchase up to an 80%
interest in the Project. The Company has already exercised the
acquisition of the initial 10%. As previously announced, when
permits for the Project are granted, the Company will pay EUR2
million to earn-in an additional 30% interest in the project and
will escalate to 70% ownership once development capital is in place
and construction is underway by paying an additional EUR5 million.
Once production is declared, the Company will purchase an
additional 10% interest in return for a 0.75% net smelter royalty
taking the Company's total interest in the Project to 80%.
Historically, the Project was explored and operated between 1970
and 1986 by Rio Tinto Patiño (RTP). During the mine's operations,
21Mt of ore at an average grade of 0.61% Cu were extracted.
Geology and Exploration
The deposit can be classed as a Mafic Siliciclastic type
(Besshi-type) Volcanogenic Massive Sulphide (VMS) deposit. The ore
zone consists of one or two mineralised horizons of disseminated
mineralisation closely associated with coarse-grained garnet
amphibolite. The mineralisation is represented in order of
abundance by pyrrhotite, chalcopyrite and minor pyrite and
sphalerite.
A total of 106,718m of drill holes were completed using reverse
circulation, diamond drilling or a combination of both methods. The
average drill hole depth was 95 meters.
Resource and Reserve Statements
A resource model with block sizes of 10x10x10 meters was
created. The resource estimate used a copper price of $3.20/lb Cu
and all resources, including inferred resources, are summarised in
the following table. The resulting pit shell is considered to have
reasonable prospects for economic extraction.
Resource Summary-Constrained by the $3.20/lb Cu Pit
>= 8.14 NSR $/t (Internal Cutoff) >= 9.71 NSR $/t (Breakeven Cutoff)
----------------------- ----------------------------------------- ------------------------------------------
Resource Class kt NSR $/t Cu% RCu% kt NSR $/t Cu% RCu%
----------------------- ----------- ---------- ------- ------- ----------- ----------- ------- -------
Measured 69,258 22.55 0.42 0.37 67,886 22.82 0.42 0.37
Indicated 60,592 19.24 0.36 0.31 59,188 19.49 0.37 0.32
Measured + Indicated 129,850 21.00 0.39 0.34 127,074 21.27 0.40 0.35
----------------------- ----------- ---------- ------- ------- ----------- ----------- ------- -------
Inferred 46,521 19.33 0.37 0.32 45,822 19.48 0.37 0.32
----------------------- ----------- ---------- ------- ------- ----------- ----------- ------- -------
Note: the above resources are shown for the full Proyecto Touro.
Further detail on the net attributable resources to Atalaya can be
seen at the end of this announcement.
Mining at Touro will use conventional, open pit methods working
from 10m high bench faces. Atalaya anticipates using contractors
for all mining work, including drilling and blasting.
Based on a Cu price of $2.60/lb, a total of 12 mining phases
were designed from which a mine production schedule was estimated
using variable net smelter return (NSR) cutoff grades ranging from
$10.00/t to $14.00/t from year one to year five and $8.14/t
thereafter. Only 2-3 phases will be active at any given time in
each year to manage ore blending, sinking rates, and stripping
ratios. The schedule targets an annual copper production rate of
approximately 30,000t after recoveries.
The following chart summarises the mineral reserve estimates by
classification at a Cu price of $2.60/lb.
Mineral Reserve Estimates by Classification
Classification Mineral Reserves
----------------- --------------------
Cu
kt (%)
----------------- ----------- -------
Proven 56,769 0.44
Probable 34,137 0.41
Total 90,906 0.43
----------------- ----------- -------
Note: the above reserves are shown for the full Proyecto Touro.
Further detail on the net attributable reserves to Atalaya can be
seen at the end of this announcement.
Contained copper is estimated at nearly 392,000 tonnes. Waste
rock tonnage is projected at about 221 Mt, resulting in an average
strip ratio of 2.43. Mine life is projected at just over 12 years,
excluding the preproduction stripping period. All of the mineral
reserves are contained within the estimates of mineral
resources.
Metallurgical Testwork and Processing
The proposed process flowsheet uses conventional crushing, SAG
mill - ball mill (SAB) grinding, followed by a flotation recovery
circuit and concentrate thickening and filtration. Metallurgical
testwork completed during the latest programme reported
concentrates that averaged 29.1% Cu with an 87.0% recovery. The
high-grade copper concentrate produced at Touro is expected to
attract premiums in international markets owing to very low
deleterious contents.
The concentrator and associated service facilities are designed
for an initial phase 1 plant throughput of 6.0 Mt/y and then a
phase 2 upgrade to increase plant throughput to 10 Mt/y prior to
year eight. The phase 1 average head grade is 0.53% Cu with a peak
of 0.57% Cu. The phase 2 average head grade is 0.35% Cu with a peak
of 0.38% Cu. The overall result is consistent concentrate and
copper production for both phases.
Infrastructure and Services
The Project will utilise in-pit tailings disposal for a
substantial part of the mine life owing to the multiple pit mine
operating plan. During the initial years of operation, tailings
will be stored in a surface Tailings Management Facility (TMF).
After year eight, tailings will be stored in the exhausted Vieiro
and Arinteiro open pits. The surface TMF will have an impervious
liner and have a capacity of 44Mt of tailings, while the in-pit TMF
will store 47Mt of tailings. A tailings thickening system will be
implemented downstream of the concentrator to produce a total of
91Mt of thickened tailings with a final approximate 67% solids
content.
The nominal power demand for the operation is approximately
25MW. Power for the Project will be supplied from the Portodemouros
electrical substation via the nearby 66 kV distribution network. A
new step-down substation and a 12 km 6.3 kV overhead power line
will be constructed to the Project site.
Environmental impact assessment and rehabilitation plans were
developed and submitted to the authorities as part of the
permitting process. The final reclamation is designed to be
implemented and completed in parallel with the cessation of mining
in each area and as soon as possible after cessation of processing
operations.
Production Parameters and Project Economics
Life of Mine Production
Waste 221.33 M tonnes
------------------ -------- ----------
Ore 90.91 M tonnes
------------------ -------- ----------
Grade Cu 0.43 %
------------------ -------- ----------
Contained Metal 346.82 k tonnes
in concentrate,
Cu
------------------ -------- ----------
Payable Metal, 340.74 k tonnes
Cu
------------------ -------- ----------
Payable Metal, 925.00 k ounces
Ag
------------------ -------- ----------
Life of mine capital costs detailed in the following table
include both the initial development capital of $164.91 million and
a capital expansion in year eight of $30.91 million. The capital
expansion in year eight is required to increase throughput capacity
up to 10 Mtpa for treatment of lower grade ore to maintain copper
production rates from year eight onwards. Sustaining capital
requirements average $3.7 million per annum with a total
expenditure of $55.2 million over the life of mine. The total
estimated capital expenditure over the life of mine is $259.54
million.
Capital Expenditure
Area Development Expansion Total LOM
Capex in Capex in Capex in
million million million
USD USD USD
------------------------- ------------- ----------- -----------
Mining $3.88 $0.00 $3.88
------------------------- ------------- ----------- -----------
Ore Processing $61.91 $18.73 $80.64
------------------------- ------------- ----------- -----------
Tailings
& Waste $20.15 $0.00 $20.15
------------------------- ------------- ----------- -----------
On Site Infrastructure $13.36 $0.00 $13.36
------------------------- ------------- ----------- -----------
Indirect
Costs $20.89 $4.94 $25.83
------------------------- ------------- ----------- -----------
Owner's Costs $19.42 $2.90 $22.32
------------------------- ------------- ----------- -----------
Miscellaneous $25.30 $3.62 $28.92
------------------------- ------------- ----------- -----------
Sustaining
Capex $55.22
------------------------- ------------- ----------- -----------
Closure Capex $9.22
------------------------- ------------- ----------- -----------
Total LOM
Capex $164.91 $30.19 $259.54
------------------------- ------------- ----------- -----------
Life of mine operating costs are based on a combination of
estimated costs and actual operating costs obtained from Atalaya's
existing Riotinto operations located in the south of Spain. Both
fixed and variable costs have been estimated for the life of mine
and are summarised below.
Life of Mine Operating Costs
Million $/tonne $/lb
Description USD ore Cu
------------------------ ----------- --------- ------
Total Site Operating
Costs $1,141.00 12.55 1.49
------------------------ ----------- --------- ------
Total Off-Site
Operating Costs $230.65 2.54 0.30
------------------------ ----------- --------- ------
Total Operating
Costs $1,371.65 15.09 1.79
------------------------ ----------- --------- ------
C1 Cash Costs
(net silver credits) 1.73
------------------------ ----------- --------- ------
AISC (net silver
credits) 1.85
------------------------ ----------- --------- ------
Economic results are also summarised in the chart below assuming
constant 2018 US dollars (US$), amounts in Euros (EUR) converted to
US$ at an average life of mine exchange rate of EUR1.00:US$1.15 and
corporate tax rate of 25%.
Summary of Key Economic Results
Parameter Units Value
--------------- ------------------ ---------
Total Cu tonnes Cu
Production in concentrate 346,818
--------------- ------------------ ---------
Payable Cu tonnes Cu
Production in concentrate 340,741
--------------- ------------------ ---------
Mine Life Years 12
--------------- ------------------ ---------
Operating
Cash Cost US$/lb 1.73
--------------- ------------------ ---------
NPV after
tax @ 8 % US$ million 179.9
--------------- ------------------ ---------
IRR % 20.5
--------------- ------------------ ---------
Copper price US$/lb 3.00
--------------- ------------------ ---------
This financial forecast shows that after tax, capital
expenditures, and closure costs, the project will generate
unlevered total free cash flow of $489.3 million which results in
an NPV of $179.9 million at an 8% discount rate and an IRR of
20.5%. The overall project cash costs (C1), net of silver credits
is US$1.73 per pound of copper increasing to US$1.85 per pound of
copper, net of silver credits, adjusting for AISC.
The main conclusion of this report is that the Touro project is
profitable under the evaluation scenario used herein. Sensitivity
analyses on the project NPV were performed using 5% increments up
to +/- 20% on copper pricing, capital costs, operating cost inputs
(mining, processing, offsite costs and G&A respectively), and
exchange rate for the Euro:US dollar. The copper price variation
has the greatest positive and negative impact on the project NPV.
However, the project NPV remains positive in almost all scenarios,
regardless of the decreased copper price or increase in capital and
operating costs, as well as exchange rate differential.
Alberto Lavandeira, CEO of Atalaya Mining Plc commented:
"The successful outcome of this study is a significant milestone
for Atalaya, and validates our initial interest in the project. The
strong project economics reinforce the Company's approach to
operations: to discover and develop low-cost, safe and reliable
assets. We look forward with confidence to updating the market with
future progress at Proyecto Touro, and continuing our development
towards becoming a multi-asset copper producer."
About Atalaya Mining Plc
Atalaya is an AIM and TSX listed operational and development
group which produces copper concentrates and silver by-product at
its fully owned Proyecto Riotinto site in southwest Spain. In
addition, the Group has a phased, earn-in agreement for up to 80%
ownership of Proyecto Touro, a brownfield copper project in the
northwest of Spain which is currently in the permitting stage. For
further information, visit www.atalayamining.com
This announcement contains inside information for the purposes
of Article 7 of Regulation (EU) no 596/2014.
Contacts:
Charles Chichester
/ James Ash / James +44 20
Newgate Communications Browne 7680 6550
------------------------- ---------------------------- ------------
+44 20
4C Communications Carina Corbett 3170 7973
------------------------- ---------------------------- ------------
Canaccord Genuity Henry Fitzgerald-O'Connor
(NOMAD and Joint / Martin Davison +44 20
Broker) / James Asensio 7523 8000
------------------------- ---------------------------- ------------
BMO Capital Markets Jeffrey Couch/Neil +44 20
(Joint Broker) Haycock/Tom Rider 7236 1010
------------------------- ---------------------------- ------------
SUMMARY OF RESERVES AND RESOURCES
Resource Summary-Constrained by the $3.20/lb Cu Pit
>= 8.14 NSR $/t (Internal >= 9.71 NSR $/t (Breakeven
Cut-off) Cut-off)
--------------- -------------------------------------------- --------------------------------------------
Resource Gross NA(1) NSR Gross NA(1) NSR
Class kt kt $/t Cu% RCu% kt kt $/t Cu% RCu%
--------------- --------- -------- ------- ------ ------ --------- -------- ------- ------ ------
Measured 69,258 6,926 22.55 0.42 0.37 67,886 6,789 22.82 0.42 0.37
Indicated 60,592 6,059 19.24 0.36 0.31 59,188 5,919 19.49 0.37 0.32
Measured
+ Indicated 129,850 12,985 21.00 0.39 0.34 127,074 12,707 21.27 0.40 0.35
--------------- --------- -------- ------- ------ ------ --------- -------- ------- ------ ------
Inferred 46,521 4,652 19.33 0.37 0.32 45,822 4,582 19.48 0.37 0.32
--------------- --------- -------- ------- ------ ------ --------- -------- ------- ------ ------
(1) NA: Net attributable
Note: gross are 100% of the resources attributable to Proyecto
Touro whilst net attributable are those attributable to the Company
at the current 10% ownership level. As referenced above, the
Company has the option to increase its shareholding in the project
to 80% upon certain milestones.
Mineral Reserve Estimates by Classification
Classification Mineral reserves
----------------- ----------------------------------------
Gross Net attributable
----------------- ------------------ --------------------
kt Cu (%) Kt Cu (%)
----------------- -------- -------- --------- ---------
Proven 56,769 0.44 5,677 0.44
Probable 34,137 0.41 3,414 0.41
Total 90,906 0.43 9,091 0.43
----------------- -------- -------- --------- ---------
Note: gross are 100% of the reserves attributable to Proyecto
Touro whilst net attributable are those attributable to the Company
at the current 10% ownership level. As referenced above, the
Company has the option to increase its shareholding in the project
to 80% upon certain milestones.
QUALIFIED PERSON AND QUALITY CONTROL
Information of a scientific or technical nature in this Proyecto
Touro PFS was prepared under the supervision of Alan C. Noble P.E.,
an independent Qualified Person under the Canadian National
Instrument 43-101, William Rose (WLR Consulting), Jaye Pickarts,
Monica Barrero, Alistair Cadden (Golder), John Fleay and Matt
Langridge (Minnovo).
Mr. Noble has verified the data disclosed, including sampling,
analytical, and test data underlying the information or opinions
contained in this announcement in accordance with standards
appropriate to their qualifications. Mr. Noble is independent of
Atalaya.
Atalaya will be filing the technical report pre-feasibility
study for Proyecto Touro disclosed herein within 45 days of this
press release. The report will be filed on SEDAR at www.sedar.com
and on the Company's website.
GLOSSARY of TECHNICAL TERMS
Cu Copper
------------------- ----------------------------------------
Cut-off grade The minimum grade at which
mineralized material can be
economically mined and processed
for the purpose of the reserve
calculation.
------------------- ----------------------------------------
Inferred Mineral That part of a Mineral Resource
Resource for which quantity and grade
or quality are estimated on
the basis of limited geological
evidence and sampling. Geological
evidence is sufficient to imply
but not verify geological and
grade or quality continuity.
An Inferred Mineral Resource
has a lower level of confidence
than that applying to an Indicated
Mineral Resource and must not
be converted to a Mineral Reserve.
It is reasonably expected that
the majority of Inferred Mineral
Resources could be upgraded
to Indicated Mineral Resources
with continued exploration.
------------------- ----------------------------------------
Indicated Mineral That part of a Mineral Resource
Resource for which quantity, grade or
quality, densities, shape and
physical characteristics are
estimated with sufficient confidence
to allow the application of
Modifying Factors in sufficient
detail to support mine planning
and evaluation of the economic
viability of the deposit. Geological
evidence is derived from adequately
detailed and reliable exploration,
sampling and testing and is
sufficient to assume geological
and grade or quality continuity
between points of observation.
An Indicated Mineral Resource
has a lower level of confidence
than that applying to a Measured
Mineral Resource and may only
be converted to a Probable
Mineral Reserve.
------------------- ----------------------------------------
lb Pound.
------------------- ----------------------------------------
Measured Mineral That part of a Mineral Resource
Resource for which quantity, grade or
quality, densities, shape,
and physical characteristics
are estimated with confidence
sufficient to allow the application
of Modifying Factors to support
detailed mine planning and
final evaluation of the economic
viability of the deposit. Geological
evidence is derived from detailed
and reliable exploration, sampling
and testing and is sufficient
to confirm geological and grade
or quality continuity between
points of observation. A Measured
Mineral Resource has a higher
level of confidence than that
applying to either an Indicated
Mineral Resource or an Inferred
Mineral Resource. It may be
converted to a Proven Mineral
Reserve or to a Probable Mineral
Reserve.
------------------- ----------------------------------------
Mineral Reserve The economically mineable part
of a Measured and/or Indicated
Mineral Resource. It includes
diluting materials and allowances
for losses, which may occur
when the material is mined
or extracted and is defined
by studies at Pre-Feasibility
or Feasibility level as appropriate
that include application of
Modifying Factors. Such studies
demonstrate that, at the time
of reporting, extraction could
reasonably be justified. Mineral
Reserves are sub-divided in
order of increasing confidence
into Probable Mineral Reserves
and Proven Mineral Reserves.
A Probable Mineral Reserve
has a lower level of confidence
than a Proven Mineral Reserve.
------------------- ----------------------------------------
Mineral Resource A concentration or occurrence
of solid material of economic
interest in or on the Earth's
crust in such form, grade or
quality and quantity that there
are reasonable prospects for
eventual economic extraction.
The location, quantity, grade
or quality, continuity and
other geological characteristics
of a Mineral Resource are known,
estimated or interpreted from
specific geological evidence
and knowledge, including sampling.
------------------- ----------------------------------------
Probable Mineral A "Probable Mineral Reserve"
Reserve is the economically mineable
part of an Indicated and, in
some circumstances, a Measured
Mineral Resource demonstrated
by at least a Preliminary Feasibility
Study. This Study must include
adequate information on mining,
processing, metallurgical,
economic, and other relevant
factors that demonstrate, at
the time of reporting, that
economic extraction can be
justified.
------------------- ----------------------------------------
Proven Mineral A "Proven Mineral Reserve"
Reserve is the economically mineable
part of a Measured Mineral
Resource demonstrated by at
least a Preliminary Feasibility
Study. This Study must include
adequate information on mining,
processing, metallurgical,
economic, and other relevant
factors that demonstrate, at
the time of reporting, that
economic extraction is justified.
------------------- ----------------------------------------
The above definitions of "Mineral Resource", "Inferred Mineral
Resource", "Indicated Mineral Resource", and "Measured Mineral
Resource" conform to CIM Definition Standards - For Mineral
Resources and Mineral Reserves, as prepared by the CIM Standing
Committee on Reserve Definitions, and adopted by CIM Council on 10
May 2014, and as required by NI 43-101, Standards of Disclosure for
Mineral Projects, of the Canadian Securities Administrators.
This information is provided by RNS
The company news service from the London Stock Exchange
END
MSCLLFSRSDIIFIT
(END) Dow Jones Newswires
April 23, 2018 02:00 ET (06:00 GMT)
Atalaya Mining (LSE:ATYM)
Historical Stock Chart
From Apr 2024 to May 2024
Atalaya Mining (LSE:ATYM)
Historical Stock Chart
From May 2023 to May 2024