SHANGHAI, Nov. 7, 2018 /PRNewswire/ -- Semiconductor
Manufacturing International Corporation (NYSE: SMI; SEHK: 981)
("SMIC", the "Company" or "our"), one of the leading semiconductor
foundries in the world, today announced its consolidated results of
operations for the three months ended September 30, 2018.
Third Quarter 2018 Highlights
- Revenue was $850.7 million in
3Q18, compared to $890.7 million
($837.9 million, excluding technology
licensing revenue) in 2Q18 and $769.7
million in 3Q17.
- Gross profit was $174.5 million
in 3Q18, compared to $217.8 million
($165.0 million, excluding technology
licensing revenue) in 2Q18 and $177.3
million in 3Q17.
- Gross margin was 20.5% in 3Q18, compared to 24.5% (19.7%,
excluding technology licensing revenue) in 2Q18 and 23.0% in
3Q17.
Fourth Quarter 2018 Guidance
The following statements are forward looking statements based on
current expectations and involved risks and uncertainties, some of
which are set forth under "Safe Harbor Statements" below. The
Company expects:
- Revenue to decrease by 7% to 9% QoQ.
- Gross margin to range from 15% to 17%.
- Non-GAAP operating expenses, excluding the effect of employee
bonus accrual, government funding, impairment loss of machinery and
equipment, gain or loss on the disposal of machinery and equipment
and gain from the disposal of living quarters, to range from
$226 million to $230 million.
- Non-controlling interests of our majority-owned subsidiaries to
range from positive $20 million to
positive $22 million (losses to be
borne by non-controlling interests).
Dr. Zhao Haijun and Dr. Liang Mong
Song, SMIC's Co-Chief Executive Officers commented, "With
the support of our customers and the efforts of our colleagues, our
third quarter performance was in line with guidance. When excluding
revenue from technology licensing, revenue from our China region continued to grow 40% year over
year, and 5% quarter over quarter. Wireless communications, power
management and fingerprint IC applications were the major growth
drivers. Looking at the full year, our annual revenue target
remains unchanged.
Looking at the fourth quarter, although the industry has entered
a period of seasonal adjustment, we continue to carry out customer
engagement and verification on our advanced technology platforms,
so as to gather strength for future growth.
Throughout this year, many changes have taken place both in the
industry and market. At present, the most important task for SMIC
is to seize the opportunities in the market and in new
applications, and actively enhance the quality of products and
customer service. In terms of technology research and development,
we will continue to put in our utmost effort to focus on the
planning and development of mainstream and advanced technology
platforms, and maintain long-term and stable partnership with our
customers. As China's preferred
foundry partner, we believe that together with our customers,
employees and shareholders, we will benefit from the growth
opportunities of China's IC
market."
To view the full third quarter
2018 earnings click here: http://www.smics.com/uploads/5be2cbbc/2018%20Q3%20Earnings%20Release_ENG_News%20Release.pdf
Conference Call / Webcast Announcement
Date: November 8, 2018
Time: 8:30 a.m. Beijing time
Dial-in numbers and pass code:
China
|
+86
400-620-8038
|
(Pass code:
SMIC)
|
Hong Kong
|
+852
3018-6771
|
(Pass code:
SMIC)
|
Taiwan
|
+886
2-5572-3895
|
(Pass code:
SMIC)
|
United States, New
York
|
+1
845-675-0437
|
(Pass code:
SMIC)
|
The call will be webcast live with audio at
http://www.smics.com/en/site/company_activity or
https://edge.media-server.com/m6/p/gmynvsjs
An archived version of the webcast, along with an electronic
copy of this news release will be available on the SMIC website for
a period of 12 months following the webcast.
About SMIC
Semiconductor Manufacturing International Corporation ("SMIC";
NYSE: SMI; SEHK: 981), one of the leading foundries in the world,
is Mainland China's largest foundry in scale, broadest in
technology coverage, and most comprehensive in semiconductor
manufacturing services. SMIC provides integrated circuit (IC)
foundry and technology services on process nodes from 0.35 micron
to 28 nanometer. Headquartered in Shanghai, China, SMIC has an international
manufacturing and service base. In China, SMIC has a 300mm wafer fabrication
facility (fab) and a 200mm fab in Shanghai; a 300mm fab and a majority-owned
300mm fab for advanced nodes in Beijing; 200mm fabs in Tianjin and Shenzhen; and a majority-owned joint-venture
300mm bumping facility in Jiangyin; additionally, in Italy SMIC has a majority-owned 200mm fab.
SMIC also has marketing and customer service offices in the U.S.,
Europe, Japan, and Taiwan, and a representative office in
Hong Kong.
For more information, please visit www.smics.com.
Contact:
Investor
Relations
|
+86-21-3861-0000 ext.
12804
|
ir@smics.com
|
Safe Harbor Statements
(Under the Private Securities Litigation Reform Act of 1995)
This press release contains, in addition to historical
information, "forward-looking statements" within the meaning of the
"safe harbor" provisions of the U.S. Private Securities Litigation
Reform Act of 1995. These forward-looking statements, including
statements under "Fourth Quarter 2018 Guidance", "Capex Summary"
and the statements contained in the quotes of our Co-Chief
Executive Officers are based on SMIC's current assumptions,
expectations and projections about future events. SMIC uses words
like "believe," "anticipate," "intend," "estimate," "expect,"
"project," "target" and similar expressions to identify forward
looking statements, although not all forward-looking statements
contain these words. These forward-looking statements are
necessarily estimates reflecting the best judgment of SMIC's senior
management and involve significant risks, both known and unknown,
uncertainties and other factors that may cause SMIC's actual
performance, financial condition or results of operations to be
materially different from those suggested by the forward-looking
statements including, among others, risks associated with
cyclicality and market conditions in the semiconductor industry,
intense competition in the semiconductor industry, SMIC's reliance
on a small number of customers, timely wafer acceptance by SMIC's
customers, timely introduction of new technologies, SMIC's ability
to ramp new products into volume, supply and demand for
semiconductor foundry services, industry overcapacity, shortages in
equipment, components and raw materials, availability of
manufacturing capacity, financial stability in end markets, orders
or judgments from pending litigation, intensive intellectual
property litigation in semiconductor industry, general economic
conditions and fluctuations in currency exchange rates.
In addition to the information contained in this press release,
you should also consider the information contained in our other
filings with the SEC, including our annual report on Form 20-F
filed with the SEC on April 27, 2018,
especially in the "Risk Factors" section and such other documents
that we may file with the SEC or The Hong Kong Stock Exchange
Limited ("SEHK") from time to time, including current reports on
Form 6-K. Other unknown or unpredictable factors also could have
material adverse effects on our future results, performance or
achievements. In light of these risks, uncertainties, assumptions
and factors, the forward-looking events discussed in this press
release may not occur. You are cautioned not to place undue
reliance on these forward-looking statements, which speak only as
of the date stated or, if no date is stated, as of the date of this
press release. Except as may be required by law, SMIC undertakes no
obligation and does not intend to update any forward-looking
statement, whether as a result of new information, future events or
otherwise.
About Non-Generally Accepted Accounting Principles
("non-GAAP") Financial Measures
To supplement SMIC's consolidated financial results presented in
accordance with IFRS, SMIC uses in this press release non-GAAP
measures of operating results that are adjusted to exclude finance
cost, depreciation and amortization, income tax benefits and
expenses, the effect of employee bonus accrual, government funding,
impairment loss of machinery and equipment, gain or loss on the
disposal of machinery and equipment and gain from the disposal of
living quarters. This earnings release also includes fourth quarter
2018 guidance for non-GAAP operating expenses. The presentation of
non-GAAP financial measures is not intended to be considered in
isolation or as a substitute for the financial information prepared
and presented in accordance with IFRS. This earnings release
includes EBITDA, EBITDA margin and non-GAAP operating expenses
which consist of total operating expenses as adjusted to exclude
the effect of employee bonus accrual, government funding,
impairment loss of machinery and equipment, gain or loss on the
disposal of machinery and equipment and gain from the disposal of
living quarters. These non-GAAP financial measures are not
calculated or presented in accordance with, and are not
alternatives or substitutes for financial measures prepared in
accordance with IFRS, and should be read only in conjunction with
the Group's financial measures prepared in accordance with IFRS.
The Group's non-GAAP financial measures may be different from
similarly-titled non-GAAP financial measures used by other
companies.
SMIC believes that use of these non-GAAP financial measures
facilitates investors' and management's comparisons to SMIC's
historical performance. The Group's management regularly uses these
non-GAAP financial measures to understand, manage and evaluate the
Group's business and make financial and operational decisions.
The accompanying table has more information and reconciliations
of each non-GAAP financial measure to its most directly comparable
GAAP financial measure. A reconciliation of non-GAAP guidance
measures to corresponding GAAP measures is not available on a
forward-looking basis because the effect of these adjustment items
excluded for the purpose of non-GAAP operating expenses guidance
are subject to some unpredictable conditions that cannot be
estimated with reasonable certainty.
By order of the Board
Semiconductor Manufacturing International
Corporation
Dr. Gao Yonggang
Executive Director, Chief Financial Officer and Joint Company
Secretary
Shanghai, November 7, 2018
As at the date of this announcement, the directors of the
Company are:
Executive Directors
ZHOU Zixue (Chairman)
ZHAO Haijun (Co-Chief Executive Officer)
LIANG Mong Song (Co-Chief Executive Officer)
GAO Yonggang (Chief Financial Officer and Joint Company
Secretary)
Non-executive Directors
CHEN Shanzhi
ZHOU Jie
REN Kai
LU Jun
TONG Guohua
Independent Non-executive Directors
William Tudor BROWN
CHIANG Shang-Yi
CONG Jingsheng Jason
LAU Lawrence Juen-Yee
FAN Ren Da Anthony
* For identification purposes only
View original
content:http://www.prnewswire.com/news-releases/smic-reports-2018-third-quarter-results-300745565.html
SOURCE Semiconductor Manufacturing International Corporation