Fortuna Mining Corp. (NYSE: FSM | TSX: FVI) is
pleased to provide an update on its exploration programs at the
Séguéla Mine in Côte d’Ivoire.
Séguéla Mine exploration
highlights
Paul Weedon, Senior Vice President of
Exploration at Fortuna, commented, “Kingfisher is rapidly shaping
up as a substantial prospect for Séguéla, with a drill defined
strike now over 2 kilometers in length and it remains open at
depth. Recent drilling highlights include 14.2 g/t Au over an
estimated true width of 16.8 meters from 100 meters from drill hole
SGRC1865 with mineralization remaining open at depth.” Mr. Weedon
continued, “In addition to exploration success at Kingfisher,
infill and depth extension drilling at the Sunbird deposit
continues to support underground mining potential, with results
including 8.8 g/t Au over an estimated true width of 6.3 meters
from 301 meters from drill hole SGDD140.”
Kingfisher prospect drilling highlights
include:
SGRC1865: |
14.2 g/t Au31.0 g/t Au29.6 g/t Au64.6 g/t Au |
over an estimated true width of 16.8 meters from 100 meters,
includingover an estimated true width of 1.4 meters from 105
meters, and over an estimated true width of 1.4 meters from 115
meters, andover an estimated true width of 1.4 meters from 120
meters |
SGRC1866: |
3.0 g/t Au |
over an estimated true width of 18.2 meters from 21 meters |
SGRC1869: |
2.7 g/t Au |
over an estimated true width of 30.1 meters from 68 meters |
SGRD1874: |
5.5 g/t Au |
over an estimated true width of 9.1 meters from 89 meters |
SGRD1879: |
3.7 g/t Au |
over an estimated true width of 15.4 meters from 129 meters |
A further 58 holes for 6,966 meters was
completed at the Kingfisher prospect (refer to Figure 1), defining
continuous mineralization over more than 2 kilometers of strike and
merging the previous three separate lodes into a single zone of
continuous mineralization (refer to Figure 2). Drilling is
continuing, testing the depth potential along this zone with
additional exploratory drilling planned to the south where only
minimal surface geochemistry is available. Kingfisher was a “blind”
discovery with 1 to 2 meters of transported cover giving rise to
very muted or no geochemical signature. Kingfisher remains open at
depth for most of the drilled 2-kilometer strike, with the deepest
drilling only testing to approximately 200 meters below surface
(refer to Figure 3).
Additional drilling at Kingfisher has further
refined the understanding of the mineralization controls, with a
clear association identified along the strongly deformed contact
zone between a series of felsic intrusives, quartz veining, and
host basaltic units. The change in strike orientation along the
structure from north-south to north-east coincides with the higher
grade, broader mineralization intervals. Mineralization is
characterized by silica-biotite-sericite-carbonate alteration and
pyrite development within and adjacent to the quartz veining,
similar to the Boulder and Agouti deposits, 1 to 3 kilometers
further north in the same sequence and in similar structural
positions. This structure has been identified from regional
aeromagnetic surveys as extending the 32-kilometer length of the
Seguela permit, highlighting the regional prospectivity of the
project.
Drilling is scheduled with two drilling rigs to
continue throughout the remainder of 2024 with the aim of expanding
the strike and depth potential of Kingfisher and supporting a
maiden Inferred resource early in 2025.
Figure 1: Location of the
Kingfisher prospect
Figure 2: Kingfisher prospect
long-section - looking west
Figure 3: Kingfisher prospect
cross section line 892550 - looking north
Sunbird Deposit
drilling highlights include:
SGDD139: |
8.5 g/t Au |
over an estimated true width of 5.6 meters from 375 meters |
SGDD140: |
4.2 g/t Au8.8 g/t Au4.6 g/t Au |
over an estimated true width of 7.7 meters from 268 meters, andover
an estimated true width of 6.3 meters from 301 meters, and over an
estimated true width of 8.4 meters from 324 meters |
SGRD2082: |
8.0 g/t Au |
over an estimated true width of 4.9 meters from 264 meters |
SGRD2083: |
6.6 g/t Au |
over an estimated true width of 6.3 meters from 359 meters |
At Sunbird, results from the first 5 holes,
totaling 2,010 meters of a planned 12,000-meter drilling program
have been received, including 8.8 g/t Au over an estimated true
width of 6.3 meters from 301 meters in drill hole SGDD140 (refer to
Figure 4). The program is designed to infill and extend the current
mineralized footprint as part of a program to evaluate underground
mining potential, with mineralization remaining open 600 meters
below surface, or more than 800 meters down plunge from the margin
of the planned open pit.
This work will continue for the remainder of
2024, supported by preliminary underground mining studies.
Figure 4: Sunbird long section
- looking west
Refer to Appendix 1 for full details of the
drill holes and assay results for this drill program at the Séguéla
Gold Mine.
Quality Assurance & Quality Control
(QA - QC)
All drilling data completed by the Company
utilized the following procedures and methodologies. All drilling
was carried out under the supervision of the Company’s
personnel.
All reverse circulation (RC) drilling used a
5.25-inch face sampling pneumatic hammer with samples collected
into 60-liter plastic bags. Samples were kept dry by maintaining
enough air pressure to exclude groundwater inflow. If water ingress
exceeded the air pressure, RC drilling was stopped, and drilling
converted to diamond core tails. Once collected, RC samples were
riffle split through a three-tier splitter to yield a 12.5%
representative sample for submission to the analytical laboratory.
The residual 87.5% samples were stored at the drill site until
assay results were received and validated. Coarse reject samples
for all mineralized samples corresponding to significant intervals
are retained and stored on-site at the Company-controlled core
yard.
All diamond drilling (DD) drill holes started
with HQ sized diameter, before reducing to NQ diameter diamond
drill bits on intersecting fresh rock. The core was logged, marked
up for sampling using standard lengths of one meter or to a
geological boundary. Samples were then cut into equal halves using
a diamond saw. One half of the core was left in the original core
box and stored in a secure location at the Company core yard at the
project site. The other half was sampled, catalogued, and placed
into sealed bags and securely stored at the site until
shipment.
All RC and DD samples were transported to ALS’s
preparation laboratory in Yamoussoukro, Cote d’Ivoire before also
being transported via commercial courier, to ALS’s facility in
Ouagadougou, Burkina Faso. Routine gold analysis using a 50-gram
charge and fire assay with an atomic absorption finish was
completed for all samples. Quality control procedures included the
systematic insertion of blanks, duplicates and sample standards
into the sample stream. In addition, the ALS laboratory inserted
its own quality control samples.
Qualified Person
Paul Weedon, Senior Vice President of
Exploration for Fortuna Mining Corp., is a Qualified Person as
defined by National Instrument 43-101 being a member of the
Australian Institute of Geoscientists (Membership #6001). Mr.
Weedon has reviewed and approved the scientific and technical
information contained in this news release. Mr. Weedon has verified
the data disclosed, including the sampling, analytical and test
data underlying the information or opinions contained herein by
reviewing geochemical and geological databases and reviewing
diamond drill core. There were no limitations to the verification
process.
About Fortuna Mining Corp.
Fortuna Mining Corp. is a Canadian precious
metals mining company with five operating mines in Argentina,
Burkina Faso, Côte d'Ivoire, Mexico, and Peru, as well as the
preliminary economic assessment stage Diamba Sud Gold Project
located in Senegal. Sustainability is integral to all our
operations and relationships. We produce gold and silver and
generate shared value over the long-term for our stakeholders
through efficient production, environmental protection, and social
responsibility. For more information, please visit our website.
ON BEHALF OF THE BOARD
Jorge A. Ganoza President, CEO, and
DirectorFortuna Mining Corp.
Investor Relations:
Carlos Baca | info@fmcmail.com | fortunamining.com
| X | LinkedIn |
YouTube
Forward-looking Statements
This news release contains forward-looking
statements which constitute “forward-looking information” within
the meaning of applicable Canadian securities legislation and
“forward-looking statements” within the meaning of the “safe
harbor” provisions of the Private Securities Litigation Reform Act
of 1995 (collectively, “Forward-looking Statements”). All
statements included herein, other than statements of historical
fact, are Forward-looking Statements and are subject to a variety
of known and unknown risks and uncertainties which could cause
actual events or results to differ materially from those reflected
in the Forward-looking Statements. The Forward-looking Statements
in this news release include, without limitation, statements about
the exploration potential at the Kingfisher prospect, including the
proposed plan to continue with exploratory drilling to the south of
the prospect; and to continue drilling with two rigs throughout the
remainder of 2024 with the intention of supporting a maiden
inferred mineral resource in early 2025; statements about the
exploration potential at the Sunbird deposit which may support the
potential for underground mining at the Sunbird deposit; the
Company’s objectives for the current drilling program at the
Séguéla Mine and expectations regarding additional drilling and
exploration programs planned; the Company’s business strategy,
plans and outlook; the merit of the Company’s mines and mineral
properties; mineral resource and reserve estimates; timelines; the
future financial or operating performance of the Company;
expenditures; approvals and other matters. Often, but not always,
these Forward-looking Statements can be identified by the use of
words such as “estimated”, “potential”, “open”, “future”,
“assumed”, “projected”, “used”, “detailed”, “has been”, “gain”,
“planned”, “reflecting”, “will”, “containing”, “remaining”, “to
be”, or statements that events, “could” or “should” occur or be
achieved and similar expressions, including negative variations.
Forward-looking Statements involve known and unknown risks,
uncertainties and other factors which may cause the actual results,
performance or achievements of the Company to be materially
different from any results, performance or achievements expressed
or implied by the Forward-looking Statements. Such uncertainties
and factors include, among others, changes in general economic
conditions and financial markets; changes in prices for gold,
silver, and other metals; the timing and success of the Company’s
proposed exploration programs; technological and operational
hazards in Fortuna’s mining and mine development activities; risks
inherent in mineral exploration; fluctuations in prices for energy,
labour, materials, supplies and services; fluctuations in
currencies; uncertainties inherent in the estimation of mineral
reserves, mineral resources, and metal recoveries; the possibility
that the appeal in respect of the ruling in favor of Compañia
Minera Cuzcatlan S.A. de C.V. reinstating the environmental impact
authorization at the San Jose Mine (the “EIA”) will be successful;
the Company’s ability to obtain all necessary permits, licenses and
regulatory approvals in a timely manner; governmental and other
approvals; political unrest or instability in countries where
Fortuna is active; labor relations issues; as well as those factors
discussed under “Risk Factors” in the Company's Annual Information
Form for the financial year ended December 31, 2023. Although the
Company has attempted to identify important factors that could
cause actual actions, events or results to differ materially from
those described in Forward-looking Statements, there may be other
factors that cause actions, events or results to differ from those
anticipated, estimated or intended. Forward-looking Statements
contained herein are based on the assumptions, beliefs,
expectations and opinions of management, including but not limited
to expectations regarding the results from the exploration programs
conducted at the Company’s mineral properties including the Diamba
Sud Gold Project; expected trends in mineral prices and currency
exchange rates; the accuracy of the Company’s information derived
from its exploration programs at the Company’s mineral properties;
current mineral resource and reserve estimates; the presence and
continuity of mineralization at the Company’s properties; that the
Company’s activities will be in accordance with the Company’s
public statements and stated goals; that there will be no material
adverse change affecting the Company or its properties; that the
appeal filed in the Mexican Collegiate Court challenging the
reinstatement of the EIA will be unsuccessful; that all required
approvals will be obtained; that there will be no significant
disruptions affecting operations and such other assumptions as set
out herein. Forward-looking Statements are made as of the date
hereof and the Company disclaims any obligation to update any
Forward-looking Statements, whether as a result of new information,
future events or results or otherwise, except as required by law.
There can be no assurance that Forward-looking Statements will
prove to be accurate, as actual results and future events could
differ materially from those anticipated in such statements.
Accordingly, investors should not place undue reliance on
Forward-looking Statements.
Cautionary Note to United States Investors
Concerning Estimates of Reserves and Resources
Reserve and resource estimates included in this
news release have been prepared in accordance with National
Instrument 43-101 Standards of Disclosure for Mineral Projects ("NI
43-101") and the Canadian Institute of Mining, Metallurgy, and
Petroleum Definition Standards on Mineral Resources and Mineral
Reserves. NI 43-101 is a rule developed by the Canadian Securities
Administrators that establishes standards for public disclosure by
a Canadian company of scientific and technical information
concerning mineral projects. Unless otherwise indicated, all
mineral reserve and mineral resource estimates contained in the
technical disclosure have been prepared in accordance with NI
43-101 and the Canadian Institute of Mining, Metallurgy and
Petroleum Definition Standards on Mineral Resources and Reserves.
Canadian standards, including NI 43-101, differ significantly from
the requirements of the Securities and Exchange Commission, and
mineral reserve and resource information included in this news
release may not be comparable to similar information disclosed by
U.S. companies.
Appendix 1 - Séguéla Mine
HoleID |
Easting (WGS84_29N) |
Northing (WGS84_29N) |
Elev (m) |
EOH Depth (m) |
UTM Azimuth |
Dip |
Depth From (m) |
Depth To (m) |
Drilled Width (m) |
ETW (m) |
Au (ppm) |
Hole Type |
Area |
SGRC1858 |
743649 |
891799 |
390 |
90 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC1859 |
743613 |
891797 |
412 |
116 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC1860 |
743673 |
892350 |
371 |
66 |
90 |
-60 |
40 |
41 |
1 |
0.7 |
5.6 |
RC |
Kingfisher |
|
|
|
|
|
|
|
47 |
48 |
1 |
0.7 |
11.6 |
RC |
Kingfisher |
SGRC1861 |
743641 |
892349 |
373 |
136 |
90 |
-60 |
85 |
90 |
5 |
3.5 |
4.7 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
85 |
86 |
1 |
0.7 |
15.3 |
RC |
Kingfisher |
|
|
|
|
|
|
|
95 |
130 |
35 |
24.5 |
1.9 |
RC |
Kingfisher |
SGRC1862 |
743639 |
892300 |
401 |
150 |
90 |
-60 |
77 |
87 |
10 |
7 |
0.6 |
RC |
Kingfisher |
|
|
|
|
|
|
|
92 |
131 |
39 |
27.3 |
1.7 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
119 |
120 |
1 |
0.7 |
12.1 |
RC |
Kingfisher |
SGRC1863 |
743669 |
892302 |
396 |
72 |
90 |
-60 |
67 |
72 |
5 |
3.5 |
1.2 |
RC |
Kingfisher |
SGRC1864 |
743671 |
892247 |
388 |
96 |
90 |
-60 |
19 |
27 |
8 |
5.6 |
0.7 |
RC |
Kingfisher |
|
|
|
|
|
|
|
47 |
53 |
6 |
4.2 |
4.7 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
48 |
49 |
1 |
0.7 |
14.9 |
RC |
Kingfisher |
|
|
|
|
|
|
|
57 |
77 |
20 |
14 |
4.3 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
70 |
72 |
2 |
1.4 |
27.5 |
RC |
Kingfisher |
|
|
|
|
|
|
|
83 |
95 |
12 |
8.4 |
3.8 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
85 |
87 |
2 |
1.4 |
15.2 |
RC |
Kingfisher |
SGRC1865 |
743639 |
892253 |
394 |
130 |
90 |
-60 |
63 |
70 |
7 |
4.9 |
0.8 |
RC |
Kingfisher |
|
|
|
|
|
|
|
75 |
86 |
11 |
7.7 |
0.7 |
RC |
Kingfisher |
|
|
|
|
|
|
|
100 |
124 |
24 |
16.8 |
14.2 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
101 |
102 |
1 |
0.7 |
18.7 |
RC |
Kingfisher |
|
|
|
|
|
|
And |
105 |
107 |
2 |
1.4 |
31.1 |
RC |
Kingfisher |
|
|
|
|
|
|
And |
115 |
117 |
2 |
1.4 |
29.6 |
RC |
Kingfisher |
|
|
|
|
|
|
And |
118 |
119 |
1 |
0.7 |
21.4 |
RC |
Kingfisher |
|
|
|
|
|
|
And |
120 |
122 |
2 |
1.4 |
64.6 |
RC |
Kingfisher |
SGRC1866 |
743688 |
892151 |
399 |
52 |
90 |
-60 |
21 |
47 |
26 |
18.2 |
3.0 |
RC |
Kingfisher |
|
|
|
|
|
|
Incl. |
39 |
40 |
1 |
0.7 |
11.6 |
RC |
Kingfisher |
SGRC1867 |
743654 |
892151 |
400 |
114 |
90 |
-60 |
35 |
39 |
4 |
2.8 |
12.6 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
37 |
38 |
1 |
0.7 |
42.9 |
RC |
Kingfisher |
|
|
|
|
|
|
|
53 |
60 |
7 |
4.9 |
1.1 |
RC |
Kingfisher |
|
|
|
|
|
|
|
65 |
72 |
7 |
4.9 |
3.2 |
RC |
Kingfisher |
|
|
|
|
|
|
|
77 |
79 |
2 |
1.4 |
10.6 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
77 |
78 |
1 |
0.7 |
20.6 |
RC |
Kingfisher |
SGRC1869 |
743626 |
892150 |
408 |
157 |
90 |
-60 |
68 |
111 |
43 |
30.1 |
2.7 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
69 |
70 |
1 |
0.7 |
14.1 |
RC |
Kingfisher |
|
|
|
|
|
|
and |
75 |
76 |
1 |
0.7 |
14.2 |
RC |
Kingfisher |
SGRC1870 |
743671 |
892051 |
411 |
67 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC1872 |
743643 |
892050 |
414 |
114 |
90 |
-60 |
45 |
64 |
19 |
13.3 |
0.6 |
RC |
Kingfisher |
|
|
|
|
|
|
|
73 |
79 |
6 |
4.2 |
1.2 |
RC |
Kingfisher |
SGRD1873 |
743606 |
892349 |
407 |
190 |
90 |
-60 |
113 |
122 |
9 |
6.3 |
1.9 |
RC |
Kingfisher |
|
|
|
|
|
|
|
126 |
139 |
13 |
9.1 |
1.0 |
RC |
Kingfisher |
|
|
|
|
|
|
|
143 |
147 |
4 |
2.8 |
1.5 |
RC |
Kingfisher |
SGRD1874 |
743637 |
892200 |
398 |
190 |
90 |
-60 |
53 |
78 |
25 |
17.5 |
2.1 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
62 |
63 |
1 |
0.7 |
15.3 |
RC |
Kingfisher |
|
|
|
|
|
|
|
89 |
102 |
13 |
9.1 |
5.5 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
93 |
94 |
1 |
0.7 |
16.4 |
RC |
Kingfisher |
|
|
|
|
|
|
and |
98 |
99 |
1 |
0.7 |
12.1 |
RC |
Kingfisher |
|
|
|
|
|
|
|
106 |
117 |
11 |
7.7 |
4.1 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
113 |
114 |
1 |
0.7 |
31.1 |
RC |
Kingfisher |
SGRD1875 |
743607 |
892303 |
408 |
200 |
90 |
-60 |
115 |
125 |
10 |
7 |
2.0 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
119 |
120 |
1 |
0.7 |
10.2 |
RC |
Kingfisher |
SGRD1876 |
743609 |
892050 |
420 |
180 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD1877 |
743609 |
892252 |
396 |
180.4 |
90 |
-60 |
101 |
123 |
22 |
15.4 |
1.4 |
RC |
Kingfisher |
|
|
|
|
|
|
|
130 |
136 |
6 |
4.2 |
3.6 |
RC |
Kingfisher |
|
|
|
|
|
|
|
140 |
142 |
2 |
1.4 |
3.1 |
RC |
Kingfisher |
SGRD1878 |
743588 |
892091 |
420 |
210 |
90 |
-60 |
143 |
147 |
4 |
2.8 |
1.7 |
RC |
Kingfisher |
SGRD1879 |
743584 |
892150 |
399 |
230 |
90 |
-60 |
111 |
118 |
7 |
4.9 |
3.9 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
111 |
112 |
1 |
0.7 |
11.6 |
RC |
Kingfisher |
|
|
|
|
|
|
|
129 |
151 |
22 |
15.4 |
3.7 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
131 |
134 |
3 |
2.1 |
17.6 |
RC |
Kingfisher |
SGRC2029 |
743680 |
891950 |
411 |
50 |
90 |
-60 |
0 |
5 |
5 |
3.5 |
1.3 |
RC |
Kingfisher |
SGRC2030 |
743650 |
891951 |
414 |
110 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD2043 |
743582 |
891749 |
400 |
190 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD2044 |
743533 |
891492 |
388 |
190.4 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2045 |
743622 |
891451 |
384 |
60 |
90 |
-60 |
|
|
|
|
2.0 |
RC |
Kingfisher |
SGRC2046 |
743595 |
891399 |
387 |
100 |
90 |
-60 |
|
|
|
|
NSI |
RC |
Kingfisher |
SGRD2048 |
743575 |
891341 |
377 |
132 |
90 |
-60 |
70 |
78 |
8 |
5.6 |
1.1 |
RC |
Kingfisher |
|
|
|
|
|
|
|
85 |
93 |
8 |
5.6 |
0.7 |
RC |
Kingfisher |
SGRC2049 |
743590 |
891149 |
360 |
54 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2050 |
743560 |
891150 |
363 |
121 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD2051 |
743615 |
891950 |
425 |
180 |
90 |
-60 |
69 |
90 |
21 |
14.7 |
0.9 |
RC |
Kingfisher |
SGRC2052 |
743591 |
891550 |
411 |
105 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD2053 |
743565 |
891550 |
394 |
171 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Kingfisher |
SGRC2054 |
743591 |
891273 |
351 |
100 |
90 |
-60 |
72 |
76 |
4 |
2.8 |
3.9 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
74 |
75 |
1 |
0.7 |
14.5 |
RC |
Kingfisher |
SGRD2055 |
743553 |
891249 |
392 |
165.5 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Kingfisher |
SGRC2057 |
743585 |
891599 |
408 |
120 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2058 |
743646 |
891200 |
386 |
50 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2059 |
743613 |
891652 |
386 |
99 |
90 |
-60 |
35 |
42 |
7 |
4.9 |
1.3 |
RC |
Kingfisher |
|
|
|
|
|
|
|
90 |
95 |
5 |
3.5 |
1.5 |
RC |
Kingfisher |
SGRC2060 |
743617 |
891200 |
371 |
110 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2061 |
743585 |
891649 |
386 |
144 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2062 |
743618 |
891750 |
389 |
106 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2063 |
743590 |
891201 |
389 |
61 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2064 |
743627 |
891848 |
408 |
102 |
90 |
-60 |
43 |
52 |
9 |
6.3 |
0.6 |
RC |
Kingfisher |
SGRD2065 |
743595 |
891849 |
420 |
168.4 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Kingfisher |
SGRD2066 |
743503 |
891340 |
400 |
240.4 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Kingfisher |
SGRD2067 |
743526 |
891249 |
385 |
220 |
90 |
-69 |
127 |
136 |
9 |
6.3 |
0.7 |
RCD |
Kingfisher |
SGRD2068 |
743576 |
891800 |
404 |
203.3 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Kingfisher |
SGRC2069 |
743646 |
891749 |
402 |
50 |
90 |
-60 |
16 |
24 |
8 |
5.6 |
0.8 |
RC |
Kingfisher |
SGRC2070 |
743658 |
891848 |
409 |
57 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2071 |
743641 |
891651 |
399 |
54 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2072 |
743626 |
891550 |
300 |
81 |
90 |
-60 |
44 |
49 |
5 |
3.5 |
2.8 |
RC |
Kingfisher |
|
|
|
|
|
|
incl. |
48 |
49 |
1 |
0.7 |
12.9 |
RC |
Kingfisher |
SGRC2073 |
743594 |
891450 |
387 |
100 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2074 |
743623 |
891400 |
388 |
73 |
90 |
-60 |
67 |
72 |
5 |
3.5 |
2.8 |
RC |
Kingfisher |
SGRD2076 |
743538 |
891550 |
399 |
201.2 |
90 |
-60 |
124 |
132 |
8 |
5.6 |
1.5 |
RCD |
Kingfisher |
SGRC2100 |
743648 |
891154 |
382 |
50 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2101 |
743619 |
891150 |
383 |
91 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRC2102 |
743615 |
891252 |
387 |
40 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RC |
Kingfisher |
SGRD2105 |
743532 |
891447 |
385 |
168.1 |
90 |
-60 |
105 |
117 |
12 |
8.4 |
0.8 |
RCD |
Kingfisher |
SGRD2106 |
743564 |
891445 |
383 |
147.3 |
90 |
-60 |
90 |
98 |
8 |
5.6 |
0.7 |
RCD |
Kingfisher |
SGDD139 |
742496 |
892459 |
528 |
480.4 |
90 |
-60 |
375 |
383 |
8 |
5.6 |
8.5 |
DD |
Sunbird |
|
|
|
|
|
|
incl. |
376 |
378 |
2 |
1.4 |
23.0 |
DD |
Sunbird |
|
|
|
|
|
|
|
395 |
401 |
6 |
4.2 |
3.7 |
DD |
Sunbird |
|
|
|
|
|
|
incl. |
398 |
399 |
1 |
0.7 |
20.7 |
DD |
Sunbird |
SGDD140 |
742538 |
892460 |
533 |
360 |
90 |
-60 |
268 |
279 |
11 |
7.7 |
4.2 |
DD |
Sunbird |
|
|
|
|
|
|
incl. |
270 |
271 |
1 |
0.7 |
24.8 |
DD |
Sunbird |
|
|
|
|
|
|
|
283 |
289 |
6 |
4.2 |
0.9 |
DD |
Sunbird |
|
|
|
|
|
|
|
301 |
310 |
9 |
6.3 |
8.8 |
DD |
Sunbird |
|
|
|
|
|
|
incl. |
305 |
307 |
2 |
1.4 |
36.8 |
DD |
Sunbird |
|
|
|
|
|
|
|
324 |
336 |
12 |
8.4 |
4.6 |
DD |
Sunbird |
|
|
|
|
|
|
incl. |
326 |
328 |
2 |
1.4 |
19.1 |
DD |
Sunbird |
SGRD2082 |
742549 |
892435 |
543 |
310.2 |
90 |
-60 |
230 |
231 |
1 |
0.7 |
12.5 |
RCD |
Sunbird |
|
|
|
|
|
|
|
264 |
271 |
7 |
4.9 |
8.0 |
RCD |
Sunbird |
|
|
|
|
|
|
incl. |
264 |
265 |
1 |
0.7 |
40.1 |
RCD |
Sunbird |
SGRD2083 |
742519 |
892409 |
541 |
380.1 |
90 |
-60 |
305 |
307 |
2 |
1.4 |
3.3 |
RCD |
Sunbird |
|
|
|
|
|
|
|
338 |
341 |
3 |
2.1 |
6.0 |
RCD |
Sunbird |
|
|
|
|
|
|
incl. |
338 |
339 |
1 |
0.7 |
16.2 |
RCD |
Sunbird |
|
|
|
|
|
|
|
359 |
368 |
9 |
6.3 |
6.6 |
RCD |
Sunbird |
|
|
|
|
|
|
incl. |
360 |
362 |
2 |
1.4 |
21.4 |
RCD |
Sunbird |
SGRD2085 |
742489 |
892409 |
535 |
480 |
90 |
-60 |
|
|
0 |
0 |
NSI |
RCD |
Sunbird |
Notes:
1.EOH: End of hole2.NSI: No significant
intercepts3.ETW: Estimated true width4.Depths and widths reported
to nearest significant decimal place5.RC: reverse circulation
drilling |DD: diamond drilling tail | RCD: reverse circulation
drilling with diamond tail
Photos accompanying this announcement are available
at:https://www.globenewswire.com/NewsRoom/AttachmentNg/31c2e992-51ac-4f0a-84b7-ec0231c86e52https://www.globenewswire.com/NewsRoom/AttachmentNg/92eea30f-6032-4b2d-8c6b-022dbf1cb8a2https://www.globenewswire.com/NewsRoom/AttachmentNg/b79fb788-1bf1-47da-bc90-6d60c0f48c32https://www.globenewswire.com/NewsRoom/AttachmentNg/b177675e-4488-4891-acda-adffdaf4a35f
Fortuna Mining (TSX:FVI)
Historical Stock Chart
From Nov 2024 to Dec 2024
Fortuna Mining (TSX:FVI)
Historical Stock Chart
From Dec 2023 to Dec 2024